Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by K-CUT, this linear voltage regulator ic is a good fit for makers, students and electronics hobbyists. Main specs: manufacturer K-CUT; isolation 1KVDC; operating temperature (°c) -40℃ ~ +85℃.

Key Highlights

  • Manufacturer: K-CUT
  • Isolation: 1KVDC
  • Operating Temperature (°C): -40℃ ~ +85℃

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerK-CUT
Isolation1KVDC
Operating Temperature (°C)-40℃ ~ +85℃
Certification StandardsRoHS 
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The K-CUT B2424S-1W DC-DC 24 to 24V Isolated Power Module, made by K-CUT, is listed in our linear voltage regulator ic range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: K-CUT
  • Isolation: 1KVDC
  • Operating Temperature (°C): -40℃ ~ +85℃
  • Certification Standards: RoHS 
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load is not less than 10% of the full load, and this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company’s products with a lower rated output power (B_S-W2 & B_D-W2 Series). Recommended circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, see  It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor is seen (Table 1). Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in a series Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit.

FEATURES:

  1.  Efficiency up to 79%
  2.  Miniature DIP Package
  3.  1KVDC Isolation
  4.  Temperature Range: -40°C ~ +85°C
  5.  Internal SMD Construction
  6.  Industry Standard Pinout
  7.  No Heat sink is Required No External Component is Required
  8.  PCB Mounting
  9.  RoHS Compliance
  10. 1W DC/DC Converter,+-10% Input/Short Circuit Protection, Unregulated

Package Include:

1 x K-CUT B2424S-1W DC-DC 24 to 24V Isolated Power Module

Quick specs

Manufacturer
K-CUT
Isolation
1KVDC
Operating Temperature (°C)
-40℃ ~ +85℃
Certification Standards
RoHS 
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications