
1 / 2 · Click to enlarge
At a glance
Made by K-CUT, this buck converter is a good fit for makers, students and electronics hobbyists. Main specs: isolation 1KVDC; operating temperature (°c) -40℃ ~ +85℃; certification standards RoHS .
Key Highlights
- Isolation: 1KVDC
- Operating Temperature (°C): -40℃ ~ +85℃
- Certification Standards: RoHS
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Isolation | 1KVDC |
|---|---|
| Operating Temperature (°C) | -40℃ ~ +85℃ |
| Certification Standards | RoHS |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 5 × 2 cm |
Overview
The K-CUT B1205S-1W DC-DC 12 to 5V Isolated Step-down Power Module, made by K-CUT, is listed in our buck converter range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Isolation: 1KVDC
- Operating Temperature (°C): -40℃ ~ +85℃
- Certification Standards: RoHS
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 5 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company’s products with a lower rated output power (B_S-W2 & B_D-W2 Series). Recommended circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, see It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1). Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit.
FEATURES:
- Efficiency up to 70%
- Miniature DIP Package
- 1KVDC Isolation
- Temperature Range: -40°C ~ +85°C
- Internal SMD Construction
- Industry Standard Pinout
- No Heat sink Required No External Component Required
- PCB Mounting
- RoHS Compliance
Package Include:
1 x K-CUT B1205S-1W DC-DC 12 to 5V Isolated Step-down Power ModuleQuick specs
- Isolation
- 1KVDC
- Operating Temperature (°C)
- -40℃ ~ +85℃
- Certification Standards
- RoHS
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 8 × 5 × 2 cm



















