Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A build-it-yourself Arduino robot kit with ultrasonic, light and line-following sensors plus LEGO-compatible parts for three transformable robot forms. It lets beginners assemble, wire and program a working robot while exploring core STEM and electronics concepts.

Key Highlights

  • Three build forms: soccer, siege and handling robot
  • Ultrasonic detection from 2 cm to 400 cm at 15 degrees
  • Line tracking, obstacle avoidance and light-following behaviour
  • LEGO-compatible parts for custom structural builds
  • Includes IR remote, NRF24L01 module and LED matrix
  • Dual H-bridge motor drive with 5V, 200 rpm gear motor

Ideal For

  • Students learning Arduino programming and electronics
  • Teachers running classroom STEM and robotics lessons
  • Robotics clubs building sensor-based behaviour projects
  • Hobbyists who enjoy LEGO-compatible mechanical builds
  • Parents looking for a hands-on educational kit

Buying Tip

Check that you have a suitable lithium battery in the 2.5 to 4.2V range before building, since the kit's power source is not listed in the box contents.

Elecvora expert review

Our verdict

The Beetlebot 3-in-1 is a well-equipped educational platform that combines real assembly work with sensor programming. Its LEGO-compatible chassis and three build forms keep the kit useful well beyond a first build.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Complete electronics set with controller, sensors, servo and motor
  • LEGO-compatible parts support open-ended mechanical design
  • Three robot forms add replay value
  • IR remote and NRF24L01 module enable wireless experiments

Cons

  • Battery is not included in the listed package contents
  • Assembly and wiring require patience and basic tool use
  • Ultrasonic detection angle of 15 degrees is fairly narrow

Best for

Classroom STEM teaching and beginner Arduino robotics projects

Not ideal for

Buyers wanting a ready-to-run robot straight out of the box

Specifications

Item TypeRobot Kit
Model No. / NameBeetlebot 3 in 1 Robot
Operating Voltage (V)05
Input Voltage (V)2.5–4.2(Lithium battery)
Output Current (A)3
Maximum Power Rating(W)15W
SpeedMotor speed: 5V, 200 rpm/min
Motor DriveDual H-bridge
Detection Distance (mm)2cm to 400cm
Detection Angle15°
Length (mm)176
Width (mm)137
Weight (g)911
Shipping Weight0.913 kg
Shipping Dimensions26 × 17 × 8 cm

What's in the box

  • Black robot chassis, main board with holes
  • Black robot chassis, battery holder side
  • USB to serial adapter module
  • LED matrix module
  • NRF24L01 wireless module
  • Keyestudio microcontroller board
  • Brown perforated mounting plate
  • Black plastic robot faceplate
  • Remote control, yellow and black
  • Ultrasonic sensor module
  • Photoresistor sensor module
  • Two ball caster wheels with metal ball
  • Small plastic soccer ball
  • Micro servo motor
  • Gear motor with encoder
  • Two white plastic wheels
  • Bundle of jumper wires
  • Screw, nut and bolt pack
  • Small metal mounting plate
  • Large pack of assorted plastic LEGO-compatible parts
  • Black USB charging cable, USB-A to Micro USB
  • Phillips screwdriver, purple and black handle
  • Flathead screwdriver, red and black handle

Frequently Asked Questions

What can the Beetlebot 3-in-1 do?
It can avoid obstacles, follow black lines and move toward light using its ultrasonic and photoresistor sensors. It can also be built in soccer, siege and handling forms.
Is a battery included?
The listed package contents do not include a lithium battery. The kit accepts an input voltage of 2.5 to 4.2V from a lithium battery, which must be supplied separately.
Do I need programming experience?
No prior experience is required, but you will need a computer and an Arduino-compatible software environment to upload and modify code.
Is it compatible with LEGO blocks?
Yes. The kit includes a large pack of assorted plastic LEGO-compatible parts, and the chassis is designed for building custom structures.
How does the robot receive remote commands?
An IR remote and an NRF24L01 wireless module are included, allowing remote-control and wireless communication experiments.
How should I care for the kit?
Keep the electronics dry, store small parts and fasteners in the pack, and charge the lithium battery only with the included USB charging cable.

Overview

The Keyestudio Beetlebot 3-in-1 is an Arduino-based robot kit designed for learning by building. Instead of a pre-assembled car, you receive the chassis plates, control board, sensors, motors, wheels and fasteners needed to construct a working robot and then program its behaviour. The kit is built around a Keyestudio microcontroller board with reserved ports, so wiring stays organised and the electronics are easy to reach during experiments.

Because the chassis is compatible with LEGO building blocks, the robot is not limited to its factory shape. Builders can add their own structures and convert the platform between soccer, siege and handling forms.

Key Features

  • Three robot forms: soccer, siege and handling configurations give the same electronics three different purposes.
  • Multiple behaviours: obstacle avoidance, black-line tracking and light following are all supported by the included sensors.
  • Ultrasonic sensing: detection from 2 cm to 400 cm with a 15-degree angle for distance-based decisions.
  • Wireless control: an IR remote and NRF24L01 wireless module are included for remote experiments.
  • Visual feedback: an LED matrix module lets the robot display simple patterns and status information.
  • LEGO-compatible: a large pack of assorted plastic parts encourages custom mechanical designs.

Specifications Explained

The kit runs at an operating voltage of 5V and accepts an input voltage of 2.5 to 4.2V from a lithium battery. Its output current is rated at 3A with a maximum power rating of 15W, which is ample for the included gear motor and servo. The motor turns at 200 rpm at 5V and is driven through a dual H-bridge, allowing direction and speed control in code.

The ultrasonic sensor covers 2 cm to 400 cm at an angle of 15 degrees, so it is suited to forward-looking distance checks rather than wide-area scanning. The assembled robot measures about 176 mm by 137 mm and weighs roughly 911 g.

Compatibility and Requirements

The kit is designed around the included Keyestudio microcontroller board and its reserved control ports. Structural parts are compatible with LEGO building blocks. A lithium battery in the 2.5 to 4.2V input range is required for operation and is not listed among the package contents. Programming requires a computer and the appropriate Arduino-compatible software environment.

Typical Uses

Use the Beetlebot for classroom STEM lessons, after-school robotics clubs, first Arduino projects and home learning. The soccer form supports friendly robot matches, the siege form demonstrates pushing mechanics, and the handling form introduces object transport. Sensor experiments cover distance measurement, line tracking and light response.

What's in the Box

The package includes two chassis sections, a Keyestudio microcontroller board, USB-to-serial adapter, LED matrix, NRF24L01 module, ultrasonic and photoresistor sensors, a micro servo, an encoder gear motor, two white wheels, two ball caster wheels, a perforated mounting plate, faceplate, small metal plate, IR remote, soccer ball, jumper wires, screw and nut pack, LEGO-compatible parts, USB charging cable and two screwdrivers.

Quick specs

Item Type
Robot Kit
Model No. / Name
Beetlebot 3 in 1 Robot
Operating Voltage (V)
05
Input Voltage (V)
2.5–4.2(Lithium battery)
Output Current (A)
3
Maximum Power Rating(W)
15W
See all specifications