Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A DIY smart car kit built on the ESP32-CAM module, combining Wi-Fi, Bluetooth and camera support with an HR8833 motor driver. It lets you assemble a robot and stream live video while driving it remotely from a phone.

Key Highlights

  • ESP32-CAM module with Wi-Fi 802.11b/g/n and Bluetooth
  • 32-bit CPU up to 160MHz with 600 DMIPS
  • 520KB SRAM plus 4MB PSRAM for camera buffering
  • HR8833 motor driver board for wheel control
  • Supports OV2640 and OV7670 camera modules
  • UART, SPI, I2C and PWM interfaces for expansion

Ideal For

  • Arduino learners exploring IoT and embedded programming
  • Robotics hobbyists building a first camera car
  • STEM students working on vision and automation projects
  • Makers who want a Wi-Fi and Bluetooth robot platform
  • Teachers looking for a hands-on classroom kit

Buying Tip

Order a CR123A 3.7V Li-ion cell at the same time, since the kit cannot drive without one and the battery is not included.

Elecvora expert review

Our verdict

A well-focused educational kit that puts Wi-Fi video and motor control on one small ESP32-CAM platform. It rewards buyers who enjoy assembly and programming rather than those wanting a plug-and-play toy.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • ESP32-CAM combines camera, Wi-Fi and Bluetooth on one module
  • HR8833 driver board included for the wheels
  • Supports both OV2640 and OV7670 cameras
  • Clear expansion path through UART, SPI, I2C and PWM

Cons

  • Battery is not included, so it cannot run out of the box
  • Requires assembly and programming knowledge
  • No detailed runtime or range figures are published

Best for

Arduino learners and makers who want a programmable Wi-Fi camera robot

Not ideal for

Buyers wanting a ready-to-run remote-control car with no setup

Specifications

Item TypeEducational Kit
Model No. / NameSmart Car
Main controllerESP32-CAM module
Motor DriverHR8833
Operating Voltage (V)3.3
Charging Voltage5V
CPU32-bit, up to 160MHz (600 DMIPS)
Memory Capacity520KB SRAM + 4MB PSRAM
Support interfaceUART, SPI, I2C, PWM
Support cameraOV2640, OV7670
Connectivity‎Bluetooth, Wi-Fi 802.11b/g/n
Batteries RequiredCR123A 3.7V Li-ion (not included)
Operating systemsFreeRTOS / LwIP
Length (mm)115
Width (mm)100
Weight (g)204
Shipping Weight0.206 kg
Shipping Dimensions14 × 10 × 6 cm

What's in the box

  • 1 x Motor Driver Board
  • 1 x ESP32-CAM Module
  • 1 x 40x35mm M3 Acrylic Board
  • 1 x Directional Wheel
  • 1 x Wheel
  • 1 x USB Cable
  • 1 x M3x20+6mm Single-Pass Copper Pillar
  • 1 x M3x8 Dual-Pass Copper Pillar
  • 1 x Camera Bracket
  • 1 x M3x6 Flat Head Screw
  • 1 x 3x83mm Screwdriver

Frequently Asked Questions

What controller does the car use?
It uses the ESP32-CAM module, a 32-bit controller running at up to 160MHz with 520KB SRAM and 4MB PSRAM.
Which cameras are supported?
The kit supports OV2640 and OV7670 camera modules. Check which one is supplied with your kit before ordering a spare.
What battery does it need?
It requires a CR123A 3.7V Li-ion battery, which is not included. Charging voltage is 5V.
Does it include a battery and charger?
No. The package includes the boards, wheels, bracket, pillars, screws, USB cable and screwdriver, but no battery.
Can I connect extra sensors?
Yes, the board exposes UART, SPI, I2C and PWM interfaces for additional modules and peripherals.
How should I care for the kit?
Store it away from moisture and dust, disconnect the battery when not in use, and avoid overtightening the acrylic board and copper pillars.

Overview

The Keyestudio ESP32-CAM Vision Smart Car is a build-it-yourself robot platform for anyone learning embedded systems, IoT and camera-based control. At its centre is the ESP32-CAM module: a 32-bit controller clocked up to 160MHz with 600 DMIPS of computing power, 520KB SRAM and 4MB PSRAM. Combined with Wi-Fi 802.11b/g/n and Bluetooth, this makes the car capable of sending live camera video while you steer it wirelessly.

The kit is supplied as separate parts, so assembly is part of the learning experience. You mount the acrylic board, wheels, camera bracket and copper pillars, connect the ESP32-CAM to the HR8833 motor driver board, and then program the behaviour you want.

Key Features

  • ESP32-CAM core: integrated Wi-Fi, Bluetooth and camera interface on one module.
  • HR8833 motor driver: dedicated board for driving the car's wheels.
  • Camera flexibility: supports both OV2640 and OV7670 camera modules.
  • Expandable interfaces: UART, SPI, I2C and PWM are available for add-ons.
  • Real-time operating systems: runs FreeRTOS and LwIP for multitasking network projects.
  • Compact footprint: 115mm long, 100mm wide and 204g, easy to store and carry.

Specifications Explained

The 32-bit CPU at up to 160MHz and 600 DMIPS gives the board enough headroom to handle camera capture and network traffic together. The 520KB SRAM is the working memory, while the 4MB PSRAM provides extra space for image frames, which matters when streaming video.

The HR8833 motor driver translates the ESP32-CAM's control signals into wheel movement, so you do not need a separate driver board. Operating voltage is 3.3V and charging voltage is 5V, matching the USB power arrangement in the kit. The listed UART, SPI, I2C and PWM interfaces let you attach sensors, displays or servos later.

Compatibility and Requirements

The kit is designed for Arduino-style learning and robotics projects. It requires a CR123A 3.7V Li-ion battery, which is not included, so plan for one before your first drive. You will also need a computer to program the ESP32-CAM and a phone or tablet if you want to use app-based wireless control. The kit includes a USB cable for connection.

Typical Uses

  • Learning ESP32 programming and IoT fundamentals
  • Building a remote-controlled camera car
  • Exploring smart tracking and vision experiments
  • Classroom and club robotics demonstrations
  • Prototyping wireless sensor and control projects

What's in the Box

The package contains one motor driver board, one ESP32-CAM module, one 40x35mm M3 acrylic board, one directional wheel, one wheel, one USB cable, one M3x20+6mm single-pass copper pillar, one M3x8 dual-pass copper pillar, one camera bracket, one M3x6 flat head screw and one 3x83mm screwdriver.

Quick specs

Item Type
Educational Kit
Model No. / Name
Smart Car
Main controller
ESP32-CAM module
Motor Driver
HR8833
Operating Voltage (V)
3.3
Charging Voltage
5V
See all specifications