
1 / 3 · Click to enlarge
AI Summary
A prototyping shield for the Arduino MEGA 2560 that combines a solderable prototyping area, 28-pin chip support and a 170-point mini breadboard. It breaks out all control and power pins so you can build and test circuits without messy loose wiring.
Key Highlights
- Designed to stack with the Arduino MEGA 2560 control board
- Solderable prototyping area with connected and unconnected through-holes
- Supports soldering a 28-pin chip or SMD components
- Includes a removable 170-point mini breadboard for solderless builds
- Extends 5V, 3V and Vin power rails plus all control pins
- Onboard reset button, power LED, D13 indicator and ICSP interface
Ideal For
- Arduino MEGA 2560 owners who prototype circuits regularly
- Students and beginners learning soldering and circuit layout
- Makers building permanent projects around a 28-pin chip
- Workshops and classrooms needing quick, reusable test setups
- Electronics hobbyists working with SMD components
Buying Tip
Check that your control board is a MEGA 2560 before ordering, and budget for a soldering iron and headers if you plan to use the solderable area rather than just the breadboard.
Elecvora expert review
Our verdict
A tidy, low-cost way to give a MEGA 2560 a proper prototyping surface, combining solderable space with a small breadboard. It suits anyone who wants to move past loose jumper wires without buying a full lab setup.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines a solderable area and a 170-point breadboard in one shield
- 28-pin chip and SMD soldering supported
- All control and power pins broken out with 5V, 3V and Vin rails
- Reset button, power LED, D13 indicator and ICSP included
- Compact 106 x 56 mm footprint at 27.2 g
Cons
- Control board is not included
- Permanent builds require soldering skills and tools
- Breadboard area is small, so only compact circuits fit
Best for
Makers and learners prototyping with an Arduino MEGA 2560
Not ideal for
Users who need a ready-made shield with pre-soldered circuitry
Specifications
| Model No. / Name | Proto Shield |
|---|---|
| Compatibility | MEGA 2560 |
| Chip | 28PIN |
| Additional Specs. | Breadboard Points: 170 |
| Length (mm) | 106 |
| Width (mm) | 56 |
| Weight (g) | 27.2 |
| Shipping Weight | 0.049 kg |
| Shipping Dimensions | 11 × 7 × 3 cm |
What's in the box
- 1 x Keyestudio MEGA Protoshield prototype expansion board V3
- 1 x Mini breadboard (170 points)
Frequently Asked Questions
Which Arduino board does this shield fit?
Do I need to solder to use it?
What power rails are available?
How many breadboard points does it have?
What is included in the package?
How should I store and handle it?
Overview
The Keyestudio MEGA Protoshield V3 is a prototype expansion board built for the Arduino MEGA 2560. It mounts on top of the control board and turns a bare microcontroller into a practical workbench for circuit design, giving you a defined area to solder components and a small breadboard for quick, solderless experiments.
At 106 mm long and 56 mm wide and weighing just 27.2 g, the shield adds little bulk while opening up plenty of room for parts. All Arduino control and power pins are broken out, and the 5V, 3V and Vin rails are extended so you can tap power where you need it.
Key Features
- Dual prototyping approach: a solderable area with connected and unconnected through-holes sits alongside a 170-point mini breadboard.
- 28-pin chip support: the prototyping area can accommodate a 28-pin chip, and it also works for SMD soldering work.
- Full pin access: control and power pins are extended for easy connection.
- Status at a glance: a reset button, power LED and D13 indicator are included.
- ICSP interface: the programming header is carried through on the shield.
Specifications Explained
Compatibility: the board is specified for the MEGA 2560, so plan your build around that control board.
Prototyping area: the through-holes come in connected and unconnected rows. Connected rows let you link a group of pins quickly, while unconnected holes give you isolated points for discrete components. The 28-pin chip footprint means a full DIP chip can be soldered directly onto the shield.
Breadboard: the included mini breadboard offers 170 tie points, enough for small test circuits that you want to change without desoldering.
Power rails: 5V, 3V and Vin are extended, so sensors and small modules can be powered straight from the shield.
Size and weight: 106 x 56 mm and 27.2 g keep the stack compact. Shipping weight is 0.049 kg in an 11 x 7 x 3 cm carton.
Compatibility and Requirements
This shield is intended for the Arduino MEGA 2560 control board, which is not included. You will need that board to use the shield, plus your own components, headers and soldering tools for permanent builds. The breadboard section needs no soldering.
Typical Uses
- Learning to solder and lay out circuits on a known-good footprint
- Testing sensor and driver circuits on the mini breadboard before committing to solder
- Building a permanent project around a 28-pin chip
- Prototyping SMD circuits with a stable mounting surface
- Classroom and workshop demonstrations where quick rewiring matters
What's in the Box
- 1 x Keyestudio MEGA Protoshield prototype expansion board V3
- 1 x Mini breadboard (170 points)
Quick specs
- Model No. / Name
- Proto Shield
- Compatibility
- MEGA 2560
- Chip
- 28PIN
- Additional Specs.
- Breadboard Points: 170
- Length (mm)
- 106
- Width (mm)
- 56






















