Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A project-based ESP32 learning kit with sensors, motors, displays and a breadboard for hands-on IoT building. It supports both Arduino IDE and MicroPython, so you can start with guided tutorials and grow into your own connected projects.

Key Highlights

  • ESP32 Plus board with Wi-Fi and Bluetooth connectivity
  • Supports Arduino IDE and MicroPython programming
  • Includes ultrasonic, PIR, temperature, humidity and flame sensors
  • Motors, servos, stepper driver and relay for motion projects
  • Displays, keypad, RFID module and remote for interactive builds
  • Step-by-step tutorials, circuit diagrams and troubleshooting FAQs

Ideal For

  • Students learning electronics and IoT fundamentals
  • Makers prototyping connected sensor projects
  • Teachers running hands-on STEM workshops
  • Hobbyists moving from Arduino to ESP32 boards
  • Beginners who want guided tutorials and diagrams

Buying Tip

Check that you have a DC power source within the 7 to 12 V range before starting motor or relay projects, since the kit ships unassembled and without a battery.

Elecvora expert review

Our verdict

This is a well-rounded ESP32 learning kit that covers a lot of ground for its size, pairing a capable board with a genuinely broad component set. The dual Arduino and MicroPython support makes it flexible for both classroom teaching and independent study.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Broad component selection covers sensors, displays, motors and wireless projects
  • Supports both Arduino IDE and MicroPython
  • Includes tutorials, circuit diagrams and troubleshooting FAQs
  • Breadboard-based build keeps early projects solder-free

Cons

  • Ships unassembled, so circuits must be built by the user
  • No battery included, so a suitable DC power source is needed
  • Some projects require careful wiring and basic electronics knowledge

Best for

Students, teachers and hobbyists learning ESP32 and IoT development

Not ideal for

Users wanting a pre-assembled, plug-and-play device

Specifications

Item TypeEducation Kit
Model No. / NameIOT ESP32 Learning Kit
CompatibilityMicroPython, Arduino IDE
Input Voltage (V)DC 7 to 12
Assembled (Y/N)No
Connectivity‎Bluetooth, Wi-Fi
Development BoardESP32 Plus
Input current1.2A
Length (mm)230
Width (mm)160
Weight (g)570
Shipping Weight0.571 kg
Shipping Dimensions24 × 17 × 7 cm

What's in the box

  • 1 x ESP-32 PLUS Development Board
  • 1 x Breadboard
  • 1 x Ultrasonic Sensor
  • 1 x USB Cable
  • 1 x 35P Jumper Wire
  • 1 x Servo
  • 1 x 4-bit Digital Tube
  • 1 x Stepper Motor Drive Board
  • 1 x Joystick Module
  • 1 x PIR Motion Sensor
  • 1 x LM35DZ Temperature Sensor
  • 1 x LCD 128x32 DOT Module
  • 1 x Temperature and Humidity Sensor
  • 1 x 20P F-F Dupont Wire
  • 1 x 20P M-F Dupont Wire
  • 1 x Remote Control
  • 1 x Relay
  • 1 x Sound Sensor
  • 1 x 130 Motor
  • 1 x RFID Module
  • 1 x RFID Card
  • 1 x Key Chain
  • 2 x Potentiometer
  • 1 x 74HC595 Shift Register
  • 1 x Stepper Motor
  • 1 x OLED Module
  • 4 x Push Button
  • 10 x Red LED
  • 10 x Yellow LED
  • 10 x Blue LED
  • 10 x 102 Ohm Resistor
  • 10 x 1K Ohm Resistor
  • 10 x 10K Ohm Resistor
  • 1 x Active Buzzer
  • 1 x Passive Buzzer
  • 1 x Photoresistor
  • 1 x Flame Sensor
  • 1 x Tilt Switch
  • 1 x Thermistor
  • 1 x IR Receiver
  • 1 x IR Remote
  • 1 x RGB LED
  • 2 x S8050 NPN Transistor
  • 2 x S8550 PNP Transistor
  • 1 x 4x4 Film Keypad
  • 1 x Joystick Cap
  • 1 x Resin Card
  • 1 x 130 Motor Bracket
  • 1 x Battery Holder

Frequently Asked Questions

What programming languages does the kit support?
The kit supports the Arduino IDE and MicroPython, and the product title also references C programming through the Arduino environment.
Does the ESP32 board have wireless connectivity?
Yes, the ESP32 Plus board provides both Wi-Fi and Bluetooth connectivity for IoT projects.
What power supply does the kit need?
The board accepts DC 7 to 12 V with an input current of 1.2 A. A battery holder is included, but batteries are not supplied.
Is the kit assembled?
No, the kit is supplied unassembled. You build each circuit on the included breadboard using the provided wires and components.
What is included in the box?
The box contains the ESP32 Plus board, breadboard, USB cable, jumper and Dupont wires, sensors, displays, motors, LEDs, resistors, transistors, buzzers, a keypad, an RFID module and card, a remote control and a battery holder.
Do I need soldering tools?
Most exercises use the breadboard and jumper wires, so soldering is generally not required for the guided projects.

Overview

The Keyestudio IoT ESP32 Learning Kit is an all-in-one educational package for anyone who wants to learn electronics and connected-device programming on a single platform. At its centre is the ESP32 Plus development board, which provides Wi-Fi and Bluetooth connectivity and can be programmed through the Arduino IDE or with MicroPython. Around the board, the kit supplies a broad spread of input, output and motion components, so each lesson can end with something you can see, hear or move.

Key Features

  • Dual programming paths: follow Arduino IDE examples or write MicroPython code on the same hardware.
  • Wide component mix: sensors, displays, motors, LEDs, buzzers and a keypad cover many project types.
  • Guided learning: tutorials, circuit diagrams and troubleshooting FAQs are included with the kit.
  • Breadboard-friendly: the included breadboard and jumper wires let you prototype without soldering.
  • Connected projects: onboard Wi-Fi and Bluetooth support IoT builds such as remote monitoring and control.

Specifications Explained

The ESP32 Plus board is the core of the kit and handles both processing and wireless communication. Input voltage is DC 7 to 12 V with an input current of 1.2 A, which is relevant when you choose a power source for motor and relay projects. The kit ships unassembled, so you build circuits yourself on the breadboard, which is the point of the learning experience. The package measures roughly 230 x 160 mm and weighs about 570 g, making it easy to store and carry between home, classroom and workshop.

Compatibility and Requirements

The kit is designed for the Arduino IDE and MicroPython environments. You will need a computer to write and upload code, and the included USB cable connects the ESP32 Plus board for programming. A suitable DC power source within the stated 7 to 12 V range is required for projects that draw more current, such as those using motors or the relay.

Typical Uses

Use the kit to learn wiring and coding through guided experiments, then apply those skills to environmental monitoring with the temperature, humidity and LM35DZ sensors, motion detection with the PIR sensor, or access-control style projects with the RFID module. Motors, the servo and the stepper driver open up robotics and automation exercises, while displays, LEDs and buzzers add feedback to your builds.

What's in the Box

The package includes the ESP32 Plus development board, a breadboard, USB cable, jumper wires and Dupont wires, plus sensors, displays, motors, LEDs, resistors, transistors, buzzers, a keypad, an RFID module and card, a remote control, a battery holder and related accessories. See the full contents list below for details.

Keyestudio IOT ESP32 Learning Kit for Arduino Support MicroPython and C Programming

Quick specs

Item Type
Education Kit
Model No. / Name
IOT ESP32 Learning Kit
Compatibility
MicroPython, Arduino IDE
Input Voltage (V)
DC 7 to 12
Assembled (Y/N)
No
Connectivity
‎Bluetooth, Wi-Fi
See all specifications