
1 / 2 · Click to enlarge
At a glance
Made by Keyestudio, this educational robot kits and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Smart Robot Car Kit; model no. / name V2.0; microcontroller Arduino R3 Board. Check that your power source supplies Arduino IDE / Mixly (Block-based) before connecting it.
Key Highlights
- Small and easy to carry or mount
- Item Type: Smart Robot Car Kit
- Model No. / Name: V2.0
- Microcontroller: Arduino R3 Board
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Smart Robot Car Kit |
|---|---|
| Model No. / Name | V2.0 |
| Microcontroller | Arduino R3 Board |
| Motor Driver | L298P Shield |
| Sensor | Ultrasonic (HC-SR04), IR Receiver, 2x Photoresistors |
| Display | 8x16 LED Matrix Panel |
| Communication | HM-10 Bluetooth 4.0 Module |
| Control Method | IR Remote, Bluetooth App (iOS/Android) |
| Power Supply Voltage (V) | Arduino IDE / Mixly (Block-based) |
| Material | Acrylic & Metal Parts |
| Length (mm) | 264 |
| Width (mm) | 176 |
| Weight (g) | 1071 |
| Shipping Weight | 1.1 kg |
| Shipping Dimensions | 27 × 18 × 8 cm |
Overview
The Keyestudio DIY Mini Tank V2.0 Smart Robot car kit for Arduino STEM, made by Keyestudio, is listed in our educational robot kits and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Smart Robot Car Kit
- Model No. / Name: V2.0
- Microcontroller: Arduino R3 Board (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Motor Driver: L298P Shield
- Sensor: Ultrasonic (HC-SR04), IR Receiver, 2x Photoresistors
- Display: 8x16 LED Matrix Panel (measured diagonally; compare with the space you have before ordering)
- Communication: HM-10 Bluetooth 4.0 Module (check your phone or controller supports the same Bluetooth version for full range)
- Control Method: IR Remote, Bluetooth App (iOS/Android) (check your phone or controller supports the same Bluetooth version for full range)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Features:
- 2-in-1 robotics & electronics learning kit
- Compatible with Arduino IDE & Mixly block coding
- IR & Bluetooth remote control (iOS/Android)
- Ultrasonic obstacle avoidance & light-following modes
- Interactive 8x16 LED motion display panel
- 15+ guided STEM coding projects included
Package Includes:
1 x R3 Board with 1M USB Cable (×2)
1 x Servo Motor
2 x Tank Load-bearing Wheels
2 x M4 Self-locking Nuts
1 x 120mm Winding Line
1 x L298P Motor Driver Shield
1 x IR Receiver Module
2 x Caterpillar Bands
3 x M3×10mm Flat Head Screws
6 x M2 Nuts
2 x 2.0×40mm Screwdrivers
1 x V5 Sensor Shield
2 x Photocell Sensors
2 x Metal Motors with Leads
10 x M3×6mm Hex Screws
10 x M3×8mm Hex Screws
4 x M3×25mm Hex Screws
4 x M4×12mm Hex Screws
4 x M4×40mm Hex Screws
2 x M4×50mm Hex Screws
8 x M4 Nuts
1 x HC-SR04 Ultrasonic Sensor
1 x Acrylic Board
6 x M2×5mm Round Head Screws
10 x M2×10mm Round Head Screws
8 x M3×12mm Round Head Screws
6 x Nylon Cable Ties
3 x L-type Nickel-plated Brackets
1 x HM-10 Bluetooth 4.0 V2 Module
4 x Metal Holders
1 x 18650 Two-cell Battery Case (batteries not included)
1 x Plastic Platform
1 x L-type Black Bracket
2 x 8×16 LED Panel with 4P Wire
2 x Supporting Parts
2 x Copper Couplers
2 x Copper Bushes
4 x Flange Bearings
1 x Remote Control
2 x Tank Driver Wheels
4 x M2×11mm Copper Bushes
4 x M3×10mm Copper Bushes
4 x M3×45mm Copper Bushes
5 x 3-Pin 20cm F-F Dupont Wires
14 x M3 Nuts
10 x 20cm F-F Dupont Wires
Quick specs
- Item Type
- Smart Robot Car Kit
- Model No. / Name
- V2.0
- Microcontroller
- Arduino R3 Board
- Motor Driver
- L298P Shield
- Sensor
- Ultrasonic (HC-SR04), IR Receiver, 2x Photoresistors
- Display
- 8x16 LED Matrix Panel



















