
1 / 3 · Click to enlarge
AI Summary
The KP08 is an 8mm bore pillow block insert bearing with a zinc alloy housing and setscrew locking for secure shaft mounting. Its self-aligning design simplifies installation on general-accuracy frames and racks.
Key Highlights
- 8mm bore for precise shaft fitting
- Zinc alloy housing for durability
- Self-aligning inner bearing compensates for minor misalignment
- Top set screws lock the inner ring to the shaft
- Two-bolt mounting for quick installation
- Compact 55mm length and 12mm width
Ideal For
- CNC router builders needing 8mm shaft support
- 3D printer enthusiasts upgrading linear motion
- DIY automation and robotics projects
- Makers restoring small machinery
- Hobbyists building custom conveyor systems
Buying Tip
Check that your shaft is exactly 8mm and that your mounting surface has matching bolt holes before ordering.
Elecvora expert review
Our verdict
The KP08 is a solid, no-frills pillow block bearing that delivers reliable performance for light to medium loads. Its self-aligning design and setscrew locking make installation straightforward, though it lacks seals for harsh environments.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Easy to install with two-bolt mounting
- Self-aligning feature reduces alignment hassles
- Durable zinc alloy housing
- Compact and lightweight
Cons
- Bolts and hex key not included
- Not sealed against dust or moisture
- Limited to 8mm shafts
Best for
DIY linear motion and light machinery projects
Not ideal for
High-load or dirty environments without additional protection
Specifications
| Model No. / Name | KP08 |
|---|---|
| Material | Zinc Alloy |
| Bore Diameter [B] (mm) | 8 |
| Length (mm) | 55 |
| Width (mm) | 12 |
| Weight (g) | 25 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 1 x KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Frequently Asked Questions
What is the bore diameter of this bearing?
Does it come with mounting bolts?
Can the bearing self-align?
What material is the housing made of?
How do I secure the bearing to the shaft?
Is this bearing suitable for high-speed applications?
Overview
The KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing is a ready-to-mount unit that combines a ball bearing insert with a zinc alloy housing. It is designed to support a shaft while allowing smooth rotation, and the top set screws secure the inner ring to the shaft for a firm grip. The self-aligning feature lets the inner bearing adjust slightly within the outer ring, which helps compensate for small alignment errors in general-accuracy racks and frames. This makes the KP08 a practical choice for builders who need reliable shaft support without complex installation.
Key Features
- 8mm bore: Fits shafts of 8mm diameter for a precise fit.
- Zinc alloy housing: Offers durability and resistance to wear.
- Self-aligning design: The inner bearing can fine-tune its angle relative to the outer fixing ring, easing mounting on less-than-perfect surfaces.
- Setscrew locking: Top set screws clamp the inner ring onto the shaft, preventing slippage.
- Two-bolt mounting: The housing has two mounting holes for straightforward installation.
- Compact dimensions: 55mm length and 12mm width suit space-constrained builds.
Specifications Explained
Bore diameter (8mm): This is the internal diameter of the bearing insert, matching 8mm shafts. Ensure your shaft is clean and free of burrs for a proper fit.
Length (55mm) and width (12mm): These define the overall size of the housing. The 55mm length provides a stable base, while the 12mm width keeps the unit slim for tight spaces.
Material (zinc alloy): The housing is made from zinc alloy, which provides a good balance of strength and corrosion resistance for general use.
Weight (25g): Lightweight, so it adds minimal load to your setup.
Compatibility and Requirements
The KP08 is designed for 8mm shafts. It requires a mounting surface with two bolt holes (bolts not included). The set screws require an appropriate hex key (not included) for tightening. No additional lubrication is specified, but periodic inspection is recommended.
Typical Uses
This bearing is commonly used in linear motion systems, CNC machines, 3D printers, conveyor systems, and DIY automation projects where an 8mm shaft needs support. It is also suitable for light-duty machinery and hobby builds.
What's in the Box
1 x KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing.
Quick specs
- Model No. / Name
- KP08
- Material
- Zinc Alloy
- Bore Diameter [B] (mm)
- 8
- Length (mm)
- 55
- Width (mm)
- 12
- Weight (g)
- 25















