
1 / 6 · Click to enlarge
At a glance
Made by Lightware, this lidar sensors is a good fit for makers, students and electronics hobbyists. Main specs: distance measuring range(m) (up to 100 m); model no. / name LW20/C (100 m); supply voltage 4.5 V ... 5.5 V. Check that your power source supplies 4.5 V ... 5.5 V before connecting it.
Key Highlights
- Distance Measuring Range(M): (up to 100 m)
- Model No. / Name: LW20/C (100 m)
- Supply Voltage: 4.5 V ... 5.5 V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Distance Measuring Range(M) | (up to 100 m) |
|---|---|
| Model No. / Name | LW20/C (100 m) |
| Supply Voltage | 4.5 V ... 5.5 V |
| Nav. update rate | 48 to 5000 readings per second |
| Integration | PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio |
| Communication Interface | Serial UART and I2C (3.3 V TTL, 5 V tolerant) |
| Operating Temperature (°C) | -10° to 50 °C |
| Safety IP Rating | Unit is IP67 |
| Weight (g) | 19 g |
| Form factor | 30 mm x 20 mm x 43 mm |
| Wavelength | 905 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 5 × 5 × 3 cm |
Overview
The LightWare LW20/C (100 m) MicroLiDAR, made by Lightware, is listed in our lidar sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Distance Measuring Range(M): (up to 100 m) (quoted range is usually line-of-sight; walls and interference shorten it)
- Model No. / Name: LW20/C (100 m)
- Supply Voltage: 4.5 V ... 5.5 V (match this to your power supply; too high a voltage can damage the part)
- Nav. update rate: 48 to 5000 readings per second
- Integration: PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
- Communication Interface: Serial UART and I2C (3.3 V TTL, 5 V tolerant) (confirm your cable or board uses the same connector)
- Operating Temperature (°C): -10° to 50 °C
- Safety IP Rating: Unit is IP67 (the IP code tells you how much dust and water the casing keeps out)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Applications:
- AGL (Altitude above ground level)
- Position hold
- Terrain following
- Detect and avoid
- IoT sensor
- Assisted take-off and landing
Features:
- A dust and a water-resistant sensor for distance and height measurement
- Update in Features: Long-distance measuring range of (up to 100 m)
- Handheld at 43 mm long
- The sensor is eye-safe with a Class 1M rating
- Ultra lightweight LIDAR is ideal for small drones and UAVs; only 20g!
- Is a perfect drone laser altimeter
- Adjustable measuring speed: 48 - 388 readings per second (configurable)
- Sense-and-avoid LiDAR
- Compatible with Serial or I2C and servo driver applications
- The first and last return signals are available simultaneously
Useful Links:
- Product Guide
- 3D CAD files: LW20/C housing assembly
- 3D CAD files: LW20/C mounting bracket M2
- 3D CAD files: LW20/C bracket for Corona DS919MG
- I2C example (Arduino)
- Serial example (Arduino)
- I2C example (RaspberryPi Python)
- Serial example (RaspberryPi Python)
Package Include:
1 x LightWare LW20/C (100 m) MicroLiDARQuick specs
- Distance Measuring Range(M)
- (up to 100 m)
- Model No. / Name
- LW20/C (100 m)
- Supply Voltage
- 4.5 V ... 5.5 V
- Nav. update rate
- 48 to 5000 readings per second
- Integration
- PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
- Communication Interface
- Serial UART and I2C (3.3 V TTL, 5 V tolerant)



















