
1 / 5 · Click to enlarge
AI Summary
The LightWare SF000/B (50m) microLiDAR is an ultra-light 9.81 g laser rangefinder with a 0.2–50 m range and fast 48–388 readings/s update rate. Its UART and I2C interfaces integrate easily with PX4, ArduPilot, Arduino and Raspberry Pi for precise distance measurement.
Key Highlights
- Measures distances from 0.2 m to 50 m with 905 nm laser
- Configurable update rate of 48 to 388 readings per second
- Serial UART and I2C interfaces (3.3 V TTL, 5 V tolerant)
- Ultra-light 9.81 g and compact 24 × 34 × 20 mm form factor
- Integrates with PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
- IP40 rated unit with IP65 front face for dust and water resistance
Ideal For
- Drone developers building altitude hold or terrain-following systems
- Robotics engineers needing precise distance measurement in tight spaces
- Arduino and Raspberry Pi enthusiasts adding LiDAR to projects
- IoT device designers requiring compact rangefinding
- FPV and UAV pilots integrating detect-and-avoid functionality
Buying Tip
Check that your flight controller or microcontroller supports the 3.3 V TTL UART or I2C interface, and consider a breakout board or cable for easier wiring.
Elecvora expert review
Our verdict
The LightWare SF000/B (50m) microLiDAR packs impressive range and speed into an exceptionally small and light package. It is a solid choice for developers who need reliable distance measurement without adding significant weight or bulk.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very light at 9.81 g and compact 24 × 34 × 20 mm
- Long 50 m range with fast update rates up to 388 readings/s
- Multiple interface options (UART and I2C) with 5 V tolerance
- Broad software integration including PX4, ArduPilot and LightWare Studio
Cons
- Open-frame design may require additional protection in harsh environments
- No cables or mounting hardware included by default
- Maximum range depends on target reflectivity and ambient conditions
Best for
Drone and robotics projects where size and weight are critical
Not ideal for
Outdoor applications requiring a fully sealed, weatherproof sensor
Specifications
| Distance Measuring Range(M) | 0.2 to 50 |
|---|---|
| Model No. / Name | SF000/B (50m) |
| Supply Voltage | 4.5 V to 5.5 V |
| Nav. update rate | 48 to 388 readings per second |
| Integration | PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio |
| Communication Interface | Serial UART and I2C (3.3 V TTL, 5 V tolerant) |
| Operating Temperature (°C) | -10° to 50 °C |
| Safety IP Rating | Unit is IP40. Front face is IP65 |
| Weight (g) | 9.81g |
| Form factor | 24 mm x 34 mm x 20 mm |
| Wavelength | 905 |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 6 × 5 × 5 cm |
What's in the box
- 1 x LightWare SF000/B (50m) microLiDAR
Frequently Asked Questions
What is the maximum measuring range of the SF000/B?
Can I connect the SF000/B directly to a Raspberry Pi?
What supply voltage does the sensor require?
Is the SF000/B compatible with ArduPilot and PX4?
What is included in the package?
How should I care for the sensor?
Overview
The LightWare SF000/B (50m) microLiDAR is a high-performance distance sensor engineered for precise measurement in space-constrained projects. Using a 905 nm laser, it calculates distances from 0.2 m to 50 m by emitting pulses and analysing the reflected light. Its tiny 24 × 34 × 20 mm footprint and 9.81 g weight make it ideal for drones, robotics and portable IoT devices where every gram counts.
Key Features
- Wide measuring range: 0.2 m to 50 m for versatile applications.
- Fast update rate: Configurable from 48 to 388 readings per second.
- Flexible interfaces: Serial UART and I2C (3.3 V TTL, 5 V tolerant).
- Broad integration: Works with PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio.
- Rugged protection: IP40 unit with IP65 front face for challenging environments.
- Compact and light: 24 × 34 × 20 mm and 9.81 g.
Specifications Explained
The 50 m maximum range (measured against an 80% reflective, large target) allows the sensor to detect objects at significant distances, while the 0.2 m minimum range ensures accuracy even up close. The update rate of 48 to 388 readings per second can be configured to balance speed and data density. The 4.5 V to 5.5 V supply voltage makes it compatible with common 5 V systems, and the 3.3 V TTL logic with 5 V tolerance simplifies connection to a wide range of microcontrollers. Operating temperature from -10 °C to 50 °C covers typical indoor and outdoor use cases.
Compatibility and Requirements
The SF000/B integrates with PX4 and ArduPilot flight stacks, Arduino and Raspberry Pi platforms, and LightWare Studio for configuration and firmware updates. It requires a power supply between 4.5 V and 5.5 V and communicates via Serial UART or I2C. No additional components are included unless specified.
Typical Uses
This sensor is commonly used for altitude above ground level (AGL) measurement, position hold, terrain following, detect and avoid, IoT sensing, and assisted take-off and landing. Its small size and light weight make it particularly suited to drone and robotics applications where payload capacity is limited.
What's in the Box
1 x LightWare SF000/B (50m) microLiDAR.
Quick specs
- Distance Measuring Range(M)
- 0.2 to 50
- Model No. / Name
- SF000/B (50m)
- Supply Voltage
- 4.5 V to 5.5 V
- Nav. update rate
- 48 to 388 readings per second
- Integration
- PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
- Communication Interface
- Serial UART and I2C (3.3 V TTL, 5 V tolerant)



















