Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 200 m microLiDAR sensor delivering up to 20,000 readings per second for drones and robotics. It integrates with PX4, ArduPilot, Arduino and Raspberry Pi over USB, UART or I2C.

Key Highlights

  • 0.2 m to 200 m measuring range for long-distance detection
  • Configurable 39 to 20,000 readings per second
  • USB, Serial UART and I2C communication interfaces
  • Works with PX4, ArduPilot, Arduino and Raspberry Pi
  • Lightweight 31.53 g unit in a 30 x 56 x 50 mm housing
  • IP40 body with an IP65-rated front face

Ideal For

  • Drone developers building terrain-following and altitude-hold systems
  • Robotics engineers adding long-range obstacle detection
  • PX4 and ArduPilot users needing a compact rangefinder
  • Researchers and students working with Arduino or Raspberry Pi
  • Industrial integrators building scanning and automation setups

Buying Tip

Confirm your flight controller or microcontroller has a free UART, I2C or USB port and a regulated 4.5 V to 5.5 V supply before mounting the sensor.

Elecvora expert review

Our verdict

The SF30/D is a serious long-range LiDAR module for teams that need fast, configurable distance data in a very small package. Its broad interface and autopilot support make it easier to integrate than many specialist sensors.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 200 m range in a 31.53 g package
  • Very high configurable update rate
  • Multiple interface options and autopilot support
  • Signal strength and noise data aid diagnostics

Cons

  • Open body is only IP40 rated, so it needs shielding
  • No mounting hardware included beyond the cable

Best for

Drone and robotics developers needing compact long-range distance sensing

Not ideal for

Outdoor installations exposed to heavy dust or water without extra protection

Specifications

Distance Measuring Range(M)0.2 to 200
Model No. / NameSF30/D (200 m)
Supply Voltage4.5 V to 5.5 V
Nav. update rate39 to 20 000 readings per second
IntegrationPX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
Communication InterfaceUSB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)
Operating Temperature (°C)-10° to 50 °C
Safety IP RatingUnit is IP40. Front face is IP65
Weight (g)31.53 g
Form factor30 mm x 56 mm x 50 mm
Wavelength905
Shipping Weight0.05 kg
Shipping Dimensions6 × 6 × 5 cm

What's in the box

  • 1 x SF30/D microLiDAR sensor
  • 1 x communications cable

Frequently Asked Questions

What is the measuring range of the SF30/D?
It measures from 0.2 m up to 200 m, with the maximum range specified against a large, 80% reflective target.
Which interfaces does the sensor support?
It offers USB, Serial UART and I2C, using 3.3 V TTL logic that is 5 V tolerant.
What supply voltage does it need?
The SF30/D requires a regulated supply between 4.5 V and 5.5 V.
Is it compatible with my flight controller?
It is supported by PX4 and ArduPilot, and can also be used with Arduino, Raspberry Pi and LightWare Studio.
What comes in the package?
The box includes one SF30/D microLiDAR sensor and one communications cable.
How should I protect the sensor outdoors?
The unit is IP40 rated and the front face is IP65, so mount it to limit dust and water exposure to the open body.

Overview

The LightWare SF30/D (200 m) is a microLiDAR sensor designed for precise distance measurement and object detection. It emits 905 nm laser pulses and calculates range from the reflected light, covering distances from 0.2 m up to 200 m against large, highly reflective targets. The compact 30 x 56 x 50 mm housing weighs about 31.53 g, making it practical for small airframes and mobile robots where payload matters.

Key Features

  • Long 200 m range with a 0.2 m minimum measuring distance
  • Configurable update rate from 39 to 20,000 readings per second
  • Multiple return signals, signal strength and noise measurement
  • USB, Serial UART and I2C interfaces (3.3 V TTL, 5 V tolerant)
  • Integration support for PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
  • IP40 unit rating with an IP65-rated front face

Specifications Explained

The 0.2 to 200 m range lets the sensor report both nearby obstacles and distant terrain. The update rate is configurable, so you can slow it down for simple telemetry or push it toward 20,000 readings per second for fast scanning and responsive control loops. The 4.5 V to 5.5 V supply matches common 5 V regulated rails. The 905 nm wavelength is used for eye-safe Class 1M laser emission. The unit is rated IP40, while the front face carries IP65 protection, so plan mounting to shield the open body from dust and water. Operating temperature is -10 °C to 50 °C.

Compatibility and Requirements

The SF30/D connects over USB, Serial UART or I2C, and is supported by PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio. You will need a suitable 4.5 V to 5.5 V power source and a compatible communication port on your controller. Configuration and firmware work is handled through LightWare Studio.

Typical Uses

  • Altitude above ground level measurement
  • Position hold and terrain following
  • Detect and avoid sensing
  • Assisted take-off and landing
  • Scanning and object detection in robotics and automation

What's in the Box

Each package contains one SF30/D microLiDAR sensor and one communications cable.

Quick specs

Distance Measuring Range(M)
0.2 to 200
Model No. / Name
SF30/D (200 m)
Supply Voltage
4.5 V to 5.5 V
Nav. update rate
39 to 20 000 readings per second
Integration
PX4, ArduPilot, Arduino, Raspberry Pi and LightWare Studio
Communication Interface
USB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)
See all specifications