
1 / 5 · Click to enlarge
AI Summary
A tiny scanning microLiDAR that measures 0.2 m to 50 m with a configurable scan up to 320 degrees. Its light weight and 5000 readings per second make it well suited to small drones, UGVs and robots that need reliable obstacle sensing.
Key Highlights
- Measures from 0.2 m up to 50 m on a white wall in daylight
- Horizontal scan adjustable from a few degrees to 320 degrees
- Up to 5000 readings per second and 5 sweeps per second
- Weighs just 57.94 g in a 51 x 48 x 44 mm housing
- USB, serial UART and I2C interfaces with 3.3 V TTL, 5 V tolerant
- Works with ArduPilot, ROS, Arduino, Raspberry Pi and LightWare Studio
Ideal For
- Drone developers building small UAVs with tight weight limits
- UGV and robot builders adding obstacle detection
- SLAM and navigation researchers using ROS
- Arduino and Raspberry Pi makers exploring LiDAR sensing
Buying Tip
Confirm your platform can supply a stable 5.0 V to 5.5 V rail and supports USB, UART or I2C before mounting the sensor, since the interface choice affects how you wire it.
Elecvora expert review
Our verdict
The SF45/B packs a genuinely useful scanning range and update rate into a very small, light package, which makes it one of the more practical LiDAR options for weight-sensitive platforms. It is a strong fit for developers who need configurable coverage and straightforward integration rather than a ruggedised outdoor unit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very light at 57.94 g with a compact 51 x 48 x 44 mm body
- Wide 0.2 m to 50 m range with an adjustable scan up to 320 degrees
- High 5000 readings per second update rate
- Multiple interfaces and broad software support
- Tolerant of background lighting, wind and noise
Cons
- IP42 rating limits use in wet or dusty environments
- Requires a regulated 5.0 V to 5.5 V supply
- A 350 mm cable may be short for some airframe layouts
Best for
Small drones, UGVs and robots needing lightweight obstacle detection and SLAM
Not ideal for
Exposed outdoor installations in rain, dust or heavy washdown areas
Specifications
| Distance Measuring Range(M) | 0.2 to 50 |
|---|---|
| Model No. / Name | SF45/B (50 m) |
| Supply Voltage | 5.0 V to 5.5 V |
| Nav. update rate | Up to 5 000 readings per second and 5 sweeps per second |
| Integration | ArduPilot, ROS, Arduino, Raspberry Pi and LightWare Studio |
| Communication Interface | USB, Serial UART and I2C (3.3 V TTL, 5 V tolerant) |
| Operating Temperature (°C) | -10° to 50 °C |
| Safety IP Rating | Unit is IP42 |
| Weight (g) | 57.94 g |
| Form factor | 51 mm x 48 mm x 44 mm |
| Wavelength | 905 |
| Update Rate | 5000 readings per second |
| Cable Length | 350mm |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 10 × 9 × 9 cm |
What's in the box
- 1 x SF45/B microLiDAR sensor
- 1 x communications cable
Frequently Asked Questions
What range can the SF45/B measure?
How wide is the scan?
What voltage does the sensor need?
Which interfaces are available?
What software can I use with it?
What is included with the sensor?
Overview
The Lightware SF45/B (50 m) is a scanning microLiDAR built for small autonomous platforms. It combines a 0.2 m to 50 m measuring range with a horizontal field of view you can set from a few degrees up to 320 degrees, so you can trade scan width against resolution to match your application. The unit measures 51 x 48 x 44 mm and weighs 57.94 g, which keeps it practical for airframes and vehicles with limited payload capacity.
A 905 nm Class 1M eye-safe laser and tolerance to background lighting changes, wind and noise let the sensor work both indoors and outdoors. It reports the nearest or farthest detected surface depending on how you configure it, and it can raise an alarm when an obstacle is detected.
Key Features
- Scanning range of 0.2 m to 50 m, rated to a white wall in daylight conditions
- Adjustable horizontal scan up to 320 degrees
- Up to 5000 readings per second and up to 5 sweeps per second
- USB, serial UART and I2C communication (3.3 V TTL, 5 V tolerant)
- Compact 51 x 48 x 44 mm form factor at 57.94 g
- Internal status monitoring and obstacle alarm output
Specifications Explained
Range and scan: The 0.2 m minimum keeps close obstacles visible, while the 50 m maximum supports forward-looking detection on larger vehicles. Narrowing the scan concentrates readings where you need them; widening it gives broader coverage around the platform.
Update rate: Up to 5000 readings per second, with up to 5 sweeps per second, gives the host system frequent position updates for navigation and avoidance logic. The measurement rate is configurable from 50 Hz to 5000 Hz.
Power: The sensor accepts 5.0 V to 5.5 V, so check that your supply stays within that window under load.
Interfaces: USB, serial UART and I2C are available, so the sensor can connect to a flight controller, companion computer or microcontroller without extra adapters.
Environment: The unit is rated IP42 and operates from -10 to 50 degrees Celsius, which suits many indoor and sheltered outdoor installations.
Compatibility and Requirements
The SF45/B integrates with ArduPilot, ROS, Arduino, Raspberry Pi and LightWare Studio. A 350 mm cable is supplied with the sensor. Plan for a regulated 5.0 V to 5.5 V supply and confirm that your host platform supports one of the available interfaces.
Typical Uses
- Obstacle detection and navigation for small autonomous vehicles and drones
- Detect and avoid sensing on UAVs and UGVs
- Position hold and SLAM
- IoT and general distance-sensing projects
What's in the Box
- 1 x SF45/B microLiDAR sensor
- 1 x communications cable
Quick specs
- Distance Measuring Range(M)
- 0.2 to 50
- Model No. / Name
- SF45/B (50 m)
- Supply Voltage
- 5.0 V to 5.5 V
- Nav. update rate
- Up to 5 000 readings per second and 5 sweeps per second
- Integration
- ArduPilot, ROS, Arduino, Raspberry Pi and LightWare Studio
- Communication Interface
- USB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)



















