Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This LM2596-based buck converter steps down 4-40V DC to an adjustable 1.3-37V at up to 2A, with a built-in LED voltmeter for easy monitoring. The multi-turn potentiometer and touch button make voltage setting precise and convenient.

Key Highlights

  • Adjustable output from 1.3V to 37V DC
  • Wide 4V to 40V DC input range
  • Up to 2A continuous output current
  • Built-in LED voltmeter with input/output toggle
  • Reverse polarity and short-circuit protection
  • Compact 62 x 34 mm board, 22 g

Ideal For

  • Electronics hobbyists and makers
  • DIY power supply builders
  • LED lighting projects
  • Automotive and marine 12V accessories
  • Robotics and drone builders

Buying Tip

For loads above 1A, consider adding a small heatsink to the LM2596 chip to maintain stable operation.

Elecvora expert review

Our verdict

A practical, self-contained buck converter with a useful built-in voltmeter that simplifies voltage setting. It offers good value for low-to-medium current projects, though high-current use demands attention to thermal management.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated LED voltmeter eliminates need for external meter
  • Wide input and output voltage ranges
  • Multiple protection features
  • Compact and lightweight
  • Screw terminals for easy wiring

Cons

  • Maximum 2A output may be insufficient for some applications
  • Requires external heatsink for sustained high-current use
  • No enclosure or mounting holes provided

Best for

DIY enthusiasts and technicians needing an adjustable, metered DC-DC converter for low-power projects.

Not ideal for

High-power devices drawing more than 2A continuously without additional cooling.

Specifications

Output Current (mA)2000
Model No. / NameLM2596
Input Voltage (V)4 ~ 40 VDC
Output Voltage1.3 ~ 37 VDC
Switching frequency150
Operating Temperature (°C)-40 to 90
Length (mm)62
Width (mm)34
Weight (g)22
Shipping Weight0.025 kg
Shipping Dimensions7 × 4.5 × 2 cm

What's in the box

  • 1 x LM2596 2A Buck Step-down Power Converter Module

Frequently Asked Questions

What is the maximum output current of this module?
The module can deliver up to 2A, but the actual maximum depends on input voltage, output voltage, ambient temperature, and cooling. For continuous operation near 2A, an external heatsink is recommended.
Can I use this module to charge a battery?
This is a voltage step-down converter, not a dedicated battery charger. It lacks charging control circuitry, so it should not be used directly to charge batteries without additional management.
How do I switch between input and output voltage display?
Press the touch button briefly to toggle between input (IN LED) and output (OUT LED) voltage readings. Press and hold for 3 seconds to turn the display off; press again to turn it on.
Does the module have reverse polarity protection?
Yes, it includes input reverse polarity protection, but it is still important to connect the input with correct polarity to avoid damage.
What is included in the package?
The package includes one LM2596 2A Buck Step-down Power Converter Module. No other accessories are included.
What is the operating temperature range?
The module is rated for operation from -40°C to 90°C ambient. However, the LM2596 chip itself must not exceed 125°C; ensure adequate cooling.

Overview

The LM2596 2A Buck Step-down Power Converter Module is a versatile DC-DC step-down module designed for precise voltage regulation. It accepts input voltages from 4V to 40V DC and provides an adjustable output from 1.3V to 37V DC at up to 2A. The onboard LED voltmeter and multi-turn potentiometer allow you to set and verify output voltage without external equipment. Touch the button to switch between input and output readings, or hold for 3 seconds to turn the display off. Safety features include input reverse polarity protection, output short protection, and thermal shutdown.

Key Features

  • Adjustable output: Set any voltage from 1.3V to 37V using the precision multi-turn potentiometer.
  • Built-in voltmeter: LED display shows input or output voltage; touch button toggles and powers display on/off.
  • Protection circuits: Reverse polarity, output short, and thermal shutdown safeguards.
  • Compact size: 62 x 34 mm board weighs only 22 g.
  • Screw terminals: Simple wire connections without soldering.
  • Power-off memory: Retains last displayed voltage after power loss.

Specifications Explained

Input voltage (4-40V DC): Works with a wide range of sources, from 5V USB to 36V battery packs. Ensure input is at least 1.5V above desired output for proper regulation.

Output voltage (1.3-37V DC): Adjustable via potentiometer; the LED display helps you set it precisely.

Output current (2A max): Suitable for moderate loads. Maximum current depends on input/output difference, ambient temperature, and cooling; an external heatsink may be needed for continuous high-current use.

Switching frequency (150 kHz): Enables compact inductor size and efficient operation.

Operating temperature (-40 to 90°C): Reliable in harsh environments, but ensure the LM2596 chip does not exceed 125°C.

Compatibility and Requirements

This module is a standalone DC-DC converter. It requires a DC power source within 4-40V and a load rated for the set output voltage and current. No external programmer or software is needed. Use stranded or solid wire of suitable gauge for the screw terminals. For loads approaching 2A, verify adequate ventilation or add a heatsink.

Typical Uses

  • Powering 5V or 12V devices from a higher-voltage battery or adapter
  • DIY electronics projects and breadboard prototypes
  • LED lighting and small motor control
  • Sensor and microcontroller power supplies
  • Automotive and marine accessory power (within voltage range)

What's in the Box

1 x LM2596 2A Buck Step-down Power Converter Module.

Quick specs

Output Current (mA)
2000
Model No. / Name
LM2596
Input Voltage (V)
4 ~ 40 VDC
Output Voltage
1.3 ~ 37 VDC
Switching frequency
150
Operating Temperature (°C)
-40 to 90
See all specifications