
1 / 3 · Click to enlarge
AI Summary
A compact LM317-based step-down module that converts 4.2-40V DC input to an adjustable 1.2-37V output at up to 1.5A. Its simple VIN/GND to VOUT/GND wiring makes it a practical choice for battery-powered projects and prototyping.
Key Highlights
- Adjustable output from 1.2V to 37V
- Accepts input voltages from 4.2V to 40V
- Up to 1.5A output current
- Linear regulator based on the LM317
- Simple VIN, GND, VOUT connection points
- Wide operating temperature range of -55 to +150°C
Ideal For
- Electronics hobbyists building breadboard prototypes
- Makers needing an adjustable low-voltage supply
- Students learning about linear regulators
- DIY enthusiasts powering sensors and small motors
- Portable device repairs requiring a stable lower voltage
Buying Tip
Remember that as a linear regulator, the LM317 requires the input voltage to be at least 2-3V above the desired output for stable regulation, and it will generate heat proportional to the voltage drop and load current.
Elecvora expert review
Our verdict
The LM317 DC Linear Regulator module offers a simple, adjustable step-down solution for low-power projects. Its wide input and output ranges and 1.5A current capability make it a versatile building block, though users should account for heat dissipation in linear regulation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Adjustable output from 1.2V to 37V
- Wide input range up to 40V
- Simple four-wire connection
- Linear design provides low-noise output
Cons
- Linear regulator generates heat proportional to voltage drop
- Maximum output current of 1.5A may be insufficient for high-power devices
- No package contents specified
Best for
Low-power adjustable voltage regulation in prototyping and portable electronics
Not ideal for
High-current or high-efficiency applications where switching regulators are preferred
Specifications
| Output Current (mA) | 1500 |
|---|---|
| Model No. / Name | LM317 |
| Operating Temperature (°C) | -55 to +150 |
| Input Voltage (V) | 4.2 ~ 40 V |
| Characteristics | Frequ. 100MHz |
| Additional Specs. | Input Method: VIN Input Positive Level, GND Input Negative, Output Method: VOUT Output Positive Level, GND Output Negative |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 5 × 1 cm |
Frequently Asked Questions
What is the maximum output current of this module?
Can I use this module to charge a battery?
What input voltage do I need?
How do I connect the module?
Is a heatsink required?
What is included in the package?
Overview
The LM317 DC Linear Regulator is a step-down power module designed to take a DC input between 4.2V and 40V and provide a lower, adjustable output from 1.2V to 37V. It is built around the LM317 linear regulator, a long-established component for generating stable reference and supply voltages. The module is compact and lightweight, making it easy to integrate into portable devices, breadboard circuits and DIY electronics where a fixed higher voltage needs to be reduced to a usable lower level.
Key Features
- Adjustable output: The output voltage can be set anywhere from 1.2V to 37V, giving flexibility across different low-voltage projects.
- Wide input range: Accepts 4.2V to 40V DC, covering many battery packs and wall adapters.
- 1.5A output current: Suitable for moderate loads such as small motors, sensors and logic circuits.
- Linear regulation: Provides a smooth, low-noise output compared with switching regulators, which can be beneficial for sensitive analogue circuits.
- Straightforward wiring: Input is VIN (positive) and GND (negative); output is VOUT (positive) and GND (negative).
Specifications Explained
Input voltage (4.2V to 40V): The module needs at least 4.2V at the input to operate, and it can accept up to 40V. The input must always be higher than the desired output voltage for the regulator to step down correctly.
Output voltage (1.2V to 37V): The output is adjustable within this range. Because it is a linear regulator, the output will be lower than the input, and the difference between input and output is dissipated as heat.
Output current (1500mA): The module can supply up to 1.5A. Higher currents or large voltage drops will increase heat, so ensure adequate ventilation or heatsinking in continuous use.
Operating temperature (-55 to +150°C): The wide temperature range reflects the LM317 regulator's tolerance for harsh conditions, though the module's practical limits depend on the surrounding components and enclosure.
Characteristic frequency (100MHz): This figure relates to the regulator's internal characteristics and is not an operating switching frequency; the LM317 is a linear device.
Compatibility and Requirements
The module requires a DC input source within 4.2V to 40V. Connect the positive input to VIN and the negative to GND. The load connects to VOUT (positive) and GND (negative). No additional components are specified for basic operation, but the output voltage must be set using the onboard adjustment (not detailed in the provided data). Ensure the input voltage is always higher than the required output voltage.
Typical Uses
- Reducing battery voltage for low-power portable devices
- Prototyping on breadboard or perfboard
- Powering sensors, logic circuits and small motors
- Educational electronics projects
- General-purpose adjustable DC supply in DIY builds
What's in the Box
Package contents are not specified. Please check the product listing for details.
Quick specs
- Output Current (mA)
- 1500
- Model No. / Name
- LM317
- Operating Temperature (°C)
- -55 to +150
- Input Voltage (V)
- 4.2 ~ 40 V
- Characteristics
- Frequ. 100MHz
- Additional Specs.
- Input Method: VIN Input Positive Level, GND Input Negative, Output Method: VOUT Output Positive Level, GND Output Negative













