
1 / 5 · Click to enlarge
AI Summary
A tiny LM393-based board that detects sound through an onboard microphone and flips its digital output low once your set threshold is crossed. The onboard potentiometer lets you tune that trigger point in seconds, with an LED confirming each detection.
Key Highlights
- LM393 comparator converts microphone input into a clean digital signal
- Onboard potentiometer adjusts the sound trigger threshold
- Indicator LED lights up whenever sound exceeds the setpoint
- Single-channel digital output, driven low on detection
- Wide 3.3 to 5 VDC supply range for mixed logic projects
- Compact 36.5 x 17 mm board weighing only 4 g
Ideal For
- Arduino and microcontroller beginners learning sensor inputs
- Makers building clap-activated or noise-triggered prototypes
- Students running comparator and threshold experiments
- Hobbyists adding a low-cost sound trigger to small robots
- Educators assembling classroom electronics kits
Buying Tip
Set the potentiometer with the LED as your guide: adjust until the light stays off in a quiet room, then test with your intended sound source before final mounting.
Elecvora expert review
Our verdict
A straightforward, low-cost sound trigger that does exactly one job well: flagging when sound crosses a level you set. It is a sensible first sensor for learning projects, as long as you expect a threshold signal rather than real audio measurement.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple digital output that is easy to read
- Potentiometer makes threshold tuning quick
- Onboard LED speeds up calibration
- Runs from 3.3 or 5 VDC supplies
- Very small and light for tight builds
Cons
- Cannot measure sound level or identify frequencies
- Requires manual adjustment for each environment
- Headers and connecting wires are not included
Best for
Beginners and makers who need a basic sound-triggered digital signal
Not ideal for
Projects that need sound level measurement or frequency analysis
Specifications
| Operating Voltage (VDC) | 3.3 to 5 |
|---|---|
| Length (mm) | 36.5 |
| Width (mm) | 17 |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
What's in the box
- 1 x LM393 Sound Detection Sensor Module
Frequently Asked Questions
What does the digital output do when sound is detected?
Can this module measure how loud a sound is?
What supply voltage does it need?
How do I adjust the sensitivity?
Is a microcontroller required?
What is included with the module?
Overview
The LM393 Sound Detection Sensor Module is a small, ready-to-mount board that turns sound into a simple digital signal. An onboard microphone picks up ambient audio and feeds it to an LM393 comparator, which compares the signal against a threshold you choose with the trimmer potentiometer. When the sound level passes that point, the module pulls its digital output low and lights the onboard LED as a visual confirmation.
At 36.5 mm long, 17 mm wide and just 4 g, the board is easy to tuck into handheld builds, small enclosures and breadboard prototypes. It accepts 3.3 to 5 VDC, so it can share a supply with common 3.3 V and 5 V logic boards.
Key Features
- Digital output: a single channel that goes low when sound crosses the setpoint, easy to read with a microcontroller or logic input.
- Adjustable sensitivity: the onboard potentiometer sets the sound level at which the output triggers.
- Visual feedback: the signal LED illuminates on each detection, which helps during setup and debugging.
- Mounting hole: a retaining bolt hole allows secure fixing to panels or chassis.
- Small footprint: 36.5 x 17 mm and 4 g keeps weight and space demands low.
Specifications Explained
Operating voltage of 3.3 to 5 VDC means the board can be powered from the same rail as most hobby microcontrollers and logic circuits, without a separate regulator in many cases. Stay within that range to keep the comparator and microphone behaving predictably.
The 36.5 x 17 mm board size suits tight builds where a full sound-level meter would not fit. The 4 g weight is negligible on small robots, wearables and handheld devices, and the shipping weight of 0.005 kg with 5 x 3 x 2 cm packaging reflects how little space it needs in transit.
The digital output is a threshold signal, not an audio feed. It tells your controller that sound crossed your chosen level; it does not report how loud the sound was or which frequencies were present.
Compatibility and Requirements
The module works with any host that can supply 3.3 to 5 VDC and read a digital low/high signal, including common Arduino-style boards and other microcontroller platforms. You will need a power source within the stated voltage range and a way to connect the output to your controller, typically jumper wires or a soldered header. A small screwdriver is useful for turning the potentiometer during calibration.
Typical Uses
- Sound-triggered switching in Arduino-style learning projects
- Clap or noise-activated prototypes and demonstration rigs
- Simple acoustic event detection in small robots and gadgets
- Adding an audio-response input to interactive installations
- Classroom experiments on sensors, comparators and thresholds
What's in the Box
One LM393 Sound Detection Sensor Module. Headers, wires and mounting hardware are not listed as included, so plan for them separately if your build needs them.
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5
- Length (mm)
- 36.5
- Width (mm)
- 17
- Weight (g)
- 4
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 5 × 3 × 2 cm
















