
1 / 3 · Click to enlarge
AI Summary
A compact 8W step-up regulator that lifts a 5V-12V input to a fixed 12V output. Its 16 x 33 mm board includes a USB bonding pad and indicator light for quick DIY power projects.
Key Highlights
- 8W maximum output capacity at a fixed 12V
- Accepts a 5V to 12V input range
- 2A input current rating
- Compact 16 x 33 mm board footprint
- Bonding pad for fitting a USB jack
- Onboard indicator light for power status
Ideal For
- Makers building small 12V project circuits
- RC and FPV hobbyists powering accessories
- Electronics repairers replacing a boost stage
- Students learning about step-up converters
- DIY enthusiasts adding a USB jack to a build
Buying Tip
Confirm your load stays within the 8W output capacity and that it expects 12V before wiring the module in.
Elecvora expert review
Our verdict
A tidy little boost board that turns a 5V to 12V supply into a fixed 12V rail within an 8W envelope. It is best treated as a compact building block for low-power projects rather than a heavy-duty converter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Small 16 x 33 mm footprint
- Fixed 12V output with 8W capacity
- USB bonding pad included
- Indicator light for power status
Cons
- Output adjustment requires changing resistors
- No enclosure or connectors supplied
- Must respect the ten-times input voltage limit
Best for
Low-power DIY and hobby projects needing a 12V rail
Not ideal for
High-current or high-power loads beyond 8W
Specifications
| Model No. / Name | Power Module |
|---|---|
| Input Voltage (V) | 5V~12V |
| Output Voltage | 12 volts 8 watts |
| Input current | 2A |
| Dimensions (L x W x H) mm | 16 x 33 mm |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 4 × 2 × 1 cm |
What's in the box
- 1 x Low Voltage High Power Step-Up Regulator Module
Frequently Asked Questions
What input voltage does this module accept?
What is the output voltage?
Can I change the output voltage?
Does it include a USB port?
How do I know it is powered?
What is included in the package?
Overview
The Generic Low Voltage High Power Step-Up Regulator Module is a small boost converter board designed to raise a low input voltage to a fixed 12V output. It accepts anything from 5V to 12V on the input side and is rated for a maximum capacity of 8 watts, with an input current of 2A. At just 16 x 33 mm, it fits into tight enclosures and small project builds where space is limited.
The board includes a bonding pad for installing a USB jack, plus an indicator light that shows when the module is powered. It is a straightforward component for makers who need a 12V rail derived from a lower supply.
Key Features
- Fixed 12V output from a 5V to 12V input supply
- 8W maximum capacity for small loads and project circuits
- 2A input current rating
- Compact 16 x 33 mm board size
- USB bonding pad for fitting a USB jack
- Indicator light for quick power confirmation
Specifications Explained
The input range of 5V to 12V means the module can run from common low-voltage sources in that window. The output is fixed at 12V with an 8W ceiling, so the current available at the output depends on the load you connect and stays within that power limit. The 2A input current figure describes what the module draws on the supply side.
The output can be changed by replacing the resistors on the board, allowing a set point of up to 20V. The module is supplied with a bonding pad for a USB jack, so you can fit one if your project needs it. To avoid damage and overheating, the output voltage should not be set ten times higher than the input voltage.
Compatibility and Requirements
Use a supply within the stated 5V to 12V input range and keep the connected load within the 8W output capacity. Because the output is fixed at 12V by default, check that your load expects 12V before connecting it. If you adjust the output by changing resistors, respect the guidance about not exceeding ten times the input voltage.
Typical Uses
This module suits DIY electronics, small gadget repairs, RC and FPV accessory power, and bench projects that need a 12V rail from a lower supply. The USB bonding pad makes it useful where a USB jack is part of the build.
What's in the Box
- 1 x Low Voltage High Power Step-Up Regulator Module
Quick specs
- Model No. / Name
- Power Module
- Input Voltage (V)
- 5V~12V
- Output Voltage
- 12 volts 8 watts
- Input current
- 2A
- Dimensions (L x W x H) mm
- 16 x 33 mm
- Shipping Weight
- 0.001 kg













