Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact M5Stack unit built on the TCS3472 chip that returns red, green, blue and clear colour values over I2C. It plugs into the Grove A port of an M5Core host and works with UIFlow and Arduino.

Key Highlights

  • TCS3472 sensor IC returns RGBA colour data over I2C
  • Fixed I2C address 0x29 for simple, predictable wiring
  • Grove interface connects to the GROVE A port on M5Core
  • Works with UIFlow and Arduino development environments
  • Two Lego-compatible holes for easy mechanical mounting
  • Operating range of -40 to 85°C for tough environments

Ideal For

  • Makers building colour-sorting or inspection rigs
  • Robotics hobbyists creating colour-tracking robots
  • M5Stack users adding colour sensing to an existing M5Core project
  • Educators teaching I2C sensors and colour data
  • Arduino and UIFlow developers prototyping interactive devices

Buying Tip

Confirm you have a compatible M5Core host and a Grove cable before ordering, since the unit ships as the sensor board only.

Elecvora expert review

Our verdict

A tidy, well-integrated colour sensing module that fits neatly into the M5Stack ecosystem with minimal wiring. It is a sensible pick for anyone already using M5Core hardware who needs RGBA colour data rather than simple light detection.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Single-cable Grove connection to the GROVE A port
  • Fixed I2C address of 0x29 simplifies bus setup
  • Works in both UIFlow and Arduino
  • Lego-compatible holes make mounting straightforward
  • Wide -40 to 85°C operating range

Cons

  • Requires a separate M5Core host and Grove cable, which are not included
  • Colour readings can shift with ambient lighting, so calibration is needed
  • Only one fixed I2C address, which limits multiple identical units on one bus

Best for

M5Stack users who need reliable RGBA colour readings in a compact module

Not ideal for

Projects without an M5Core host or those needing multiple colour sensors on a single I2C bus

Specifications

Model No. / NameColor Sensor Module
IC ChipTCS3472
Operating Temperature (°C)-40℃~85℃
Communication ModeI2C:0x29
Weight (g)4g
Dimensional Accuracy (mm)32.2 x 24.2 x 8.2mm
Shipping Weight0.006 kg
Shipping Dimensions10 × 8 × 1 cm

What's in the box

  • 1 x M5Stack Color Sensor RGB Unit (TCS3472)

Frequently Asked Questions

What does this sensor actually measure?
It returns red, green, blue and clear (RGBA) values from the TCS3472 chip, letting your project identify colours rather than just light intensity.
Which devices can I connect it to?
It communicates with an M5Core host over I2C through the GROVE A interface. It is supported in UIFlow and Arduino.
What is the I2C address?
The address is fixed at 0x29, so no address configuration is required in your code.
Does the package include a cable or host board?
No. The package contains one M5Stack Color Sensor RGB Unit (TCS3472) only; a compatible host and Grove cable are needed separately.
What temperature range does it support?
The unit is rated for operation from -40°C to 85°C.
How should I care for the sensor?
Keep the sensing area clean and free of dust or fingerprints, and avoid scratching the photodiode window, since contamination can affect colour readings.

Overview

The M5Stack Color Sensor RGB Unit is a small, purpose-built module for projects that need to know what colour something is. At its centre is the TCS3472 sensor IC, which combines filtered photodiodes with 16-bit analog-to-digital conversion to produce red, green, blue and clear readings. Instead of a single light-level value, your code receives four channels of colour information that can be compared, thresholded or logged.

The unit is designed to fit the M5Stack ecosystem. It communicates over I2C at address 0x29 and connects to an M5Core host through the GROVE A interface, so no custom wiring harness is required. Support for UIFlow and Arduino means you can start with a visual workflow or move straight to code.

Key Features

  • TCS3472 sensing IC for RGBA colour detection
  • I2C communication at 0x29 for a fixed, predictable address
  • Grove interface that connects to the GROVE A port on compatible M5Core hosts
  • UIFlow and Arduino support for both block-based and text-based development
  • Two Lego-compatible holes for mounting on frames, chassis and robots
  • Wide operating temperature from -40°C to 85°C

Specifications Explained

The TCS3472 is the heart of the unit. Its filtered photodiode array separates incoming light into red, green, blue and unfiltered (clear) channels, and the built-in 16-bit converters digitise each channel. In practice, that means your project can distinguish colours rather than simply detect brightness.

The I2C address is fixed at 0x29, which keeps bus addressing simple when the sensor is the only colour device on the line. The Grove connector maps to the GROVE A interface on an M5Core host, so the physical connection is a single cable.

Physically, the module measures about 32.2 x 24.2 x 8.2 mm and weighs around 4 g, so it is light enough to mount on small moving platforms without affecting balance. The -40°C to 85°C operating range means it is not limited to indoor, room-temperature use.

Compatibility and Requirements

The unit communicates with an M5Core host through the GROVE A interface using I2C. It is supported in UIFlow and Arduino. A compatible M5Core host and a Grove cable are required to operate the sensor; these are not included with the unit.

Typical Uses

  • Product colour verification on a production or inspection line
  • Colour-tracking robots that follow or seek a coloured target
  • Sorting mechanisms that separate items by colour
  • Educational projects exploring sensors, I2C and colour spaces
  • Interactive installations that respond to coloured objects

What's in the Box

  • 1 x M5Stack Color Sensor RGB Unit (TCS3472)

Quick specs

Model No. / Name
Color Sensor Module
IC Chip
TCS3472
Operating Temperature (°C)
-40℃~85℃
Communication Mode
I2C:0x29
Weight (g)
4g
Dimensional Accuracy (mm)
32.2 x 24.2 x 8.2mm
See all specifications