Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5STACK, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: item type USB interface module; soc ESP32-S3FN8; input voltage DC 5 V. Check that your power source supplies DC 5 V before connecting it.

Key Highlights

  • Item Type: USB interface module
  • SoC: ESP32-S3FN8
  • Input Voltage: DC 5 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeUSB interface module
SoCESP32-S3FN8
Flash8 MB
Input VoltageDC 5 V
Antenna Type2.4 GHz 3D antenna
Processor Speed240 MHz Dual-Core Xtensa LX7
I/O Interface23 GPIOs
LEDWS2812B-2020 RGB LED
Supported protocolsUART, I²C, I²S, SPI, PWM, EMAC, Touch, SDIO
Pitch (mm)IO: 1.27, LCD FPC: 0.5
Operating Temperature (°C)0 to 40
Length (mm)26
Width (mm)18
Weight (g)3.1
Shipping Weight0.007 kg
Shipping Dimensions7 × 5 × 2 cm

Overview

The M5Stack M5StampS3A with 1.27 Header Pin, made by M5STACK, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: USB interface module (confirm your cable or board uses the same connector)
  • SoC: ESP32-S3FN8
  • Flash: 8 MB (space for firmware, files or media)
  • Input Voltage: DC 5 V (match this to your power supply; too high a voltage can damage the part)
  • Antenna Type: 2.4 GHz 3D antenna (make sure the rest of your system works at this frequency)
  • Processor Speed: 240 MHz Dual-Core Xtensa LX7 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • I/O Interface: 23 GPIOs (confirm your cable or board uses the same connector)
  • LED: WS2812B-2020 RGB LED

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The M5Stack M5StampS3A Header Pin 1.27 is a compact, high-performance embedded module powered by the ESP32-S3FN8 dual-core processor, clocked at 240 MHz. It comes with 8 MB of flash memory, a programmable RGB LED, and a user-friendly button, making it ideal for rapid development and integration into IoT and embedded systems. With 23 GPIOs and a pre-soldered 1.27 mm-pitch SMT header, it’s built for flexibility—supporting SMT, DIP, or fly-wire connections. The optimized 3D antenna ensures strong Wi-Fi connectivity, while its tiny 26 × 18 mm footprint makes it perfect for smart home, industrial, and wearable device applications.


Features:

  1. ESP32-S3FN8 Dual-Core 240 MHz Processor
  2. 8 MB Flash Memory
  3. Integrated 2.4 GHz 3D Antenna
  4. 1.27 mm-pitch SMT Header for Compact Integration
  5. 23 Multifunctional GPIOs
  6. Built-in Programmable RGB LED & User Button
  7. Supports Development with UiFlow2, Arduino IDE, ESP-IDF, and Platform IO
  8. Multiple I/O Interfaces including UART, I²C, I²S, SPI, PWM, Touch, and more

Application:
  1. Smart home
  2. Intelligent IoT devices
  3. Industrial control terminals
  4. Wearable devices

Package Includes:

1 x M5Stack M5StampS3A with 1.27 Header Pin

1 x Pin Sticker

Quick specs

Item Type
USB interface module
SoC
ESP32-S3FN8
Flash
8 MB
Input Voltage
DC 5 V
Antenna Type
2.4 GHz 3D antenna
Processor Speed
240 MHz Dual-Core Xtensa LX7
See all specifications