Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A power management board that adds automatic shutdown and power-loss detection to compatible MKS 3D printer mainboards. It cuts power after a finished print and helps you resume jobs after an unexpected outage.

Key Highlights

  • Monitors power status and switches the printer off automatically
  • Supports power-loss detection for resume-after-outage printing
  • Wide 100-240 VAC AC input for international mains supplies
  • 3.3-5 V logic input matches common MKS mainboards
  • Compact 50 mm board fits inside the printer electronics bay
  • Includes power switch, cables and pushbutton for installation

Ideal For

  • Makers running long unattended 3D prints
  • Owners of MKS Robin Nano or Robin 2 mainboards
  • Users of MKS TFT series displays
  • Builders using MKS Robin E3 or E3D with LCD12864
  • Anyone wanting automatic shutdown after a finished print

Buying Tip

Check that your mainboard matches a supported setup, such as an MKS TFT display with a motherboard or a Robin Nano, Robin 2, E3 or E3D, before ordering.

Elecvora expert review

Our verdict

The MKS PWC is a practical add-on for MKS-based printers, giving automatic shutdown and power-loss handling in a compact module. It is a focused accessory, so it suits users already inside the MKS ecosystem rather than general retrofits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Automatic power off after a finished print
  • Power outage detection for continued printing
  • Wide 100-240 VAC input range
  • Includes switch, cables and pushbutton
  • Compact 50 mm board

Cons

  • Limited to the listed MKS board combinations
  • Requires mains wiring inside the printer
  • No enclosure or mounting hardware described

Best for

MKS-based 3D printer owners wanting automated shutdown and outage recovery

Not ideal for

Printers with non-MKS control boards or users unwilling to work with mains wiring

Specifications

Item TypeController Board
CompatibilityGeneral Purpose
Input Voltage (VAC)100
Width (mm)50
Weight (g)249
Shipping Weight0.179 kg
Shipping Dimensions22 × 14 × 2 cm

What's in the box

  • 1 x MakerBase MKS PWC Power Monitoring Auto Power Off board
  • 1 x Power switch with cable
  • 3 x Power cable (1 black, 2 red)
  • 2 x 3-pin cable
  • 1 x Non-self-locking pushbutton switch

Frequently Asked Questions

What does the MKS PWC actually do?
It monitors the printer's power state, can turn power off automatically when a print finishes, and supports power-loss detection so printing can continue after an outage.
Which boards does it work with?
It is specified for a motherboard with an MKS TFT series display, or an MKS Robin Nano or Robin 2 alone, and for MKS Robin E3/E3D with LCD12864 control.
What input voltages does it accept?
The AC input supports 100-240 VAC, and the logic input operates at 3.3-5 V.
What is included in the package?
You get the MKS PWC board, a power switch with cable, three power cables (one black, two red), two 3-pin cables and a non-self-locking pushbutton switch.
How big is the board?
The board is 50 mm wide and weighs 249 g, with retail shipping dimensions of 22 × 14 × 2 cm.
Can I install it myself?
Installation involves mains wiring inside the printer, so it should only be attempted if you are comfortable working safely with AC power.

Overview

The MakerBase MKS PWC is a dedicated power monitoring and control board for 3D printers. It manages the flow of mains power to your printer so the machine can react to what the print job is doing. Instead of leaving the printer energised after a job ends, the MKS PWC can remove power automatically, and it can also detect a power failure so the job can be continued once power returns.

It is aimed at anyone running long or unattended prints who wants a tidier, safer shutdown routine and a practical answer to unexpected outages.

Key Features

  • Automatic power off: the board can cut power after printing finishes, controlled by the printer software.
  • Power outage detection: detects a loss of supply and supports continued printing when power is restored.
  • Power status monitoring: the board keeps track of the incoming power state.
  • Wide AC input: accepts 100-240 VAC, covering mains supplies in most regions.
  • Low-voltage logic: 3.3-5 V logic input for connection to compatible MKS control hardware.
  • Compact footprint: 50 mm wide, weighing 249 g, so it fits alongside existing electronics.

Specifications Explained

The 100-240 VAC input range means the board is designed to work with standard mains power in the US, UK, EU, Australia, Brazil, Japan and India without a separate voltage version. The 3.3-5 V logic input is the signal level the board expects from the control board, matching the MKS hardware listed for use.

At 50 mm wide and 249 g, the module is small enough to mount inside a typical printer enclosure or control box. Shipping dimensions of 22 × 14 × 2 cm reflect the compact retail packaging.

Compatibility and Requirements

The MKS PWC is specified to work with a motherboard plus an MKS TFT series display, or with an MKS Robin Nano or Robin 2 board alone. It also supports the MKS Robin E3 and E3D when controlled through an LCD12864 display. Plan your wiring around one of these configurations before installation.

Typical Uses

  • Shutting a printer down automatically when a job completes
  • Resuming a print after a brief power interruption
  • Reducing standby power draw on printers left plugged in
  • Adding interactive power control to an MKS-based printer build

What's in the Box

  • 1 x MakerBase MKS PWC power monitoring board
  • 1 x Power switch with cable
  • 3 x Power cable (1 black, 2 red)
  • 2 x 3-pin cable
  • 1 x Non-self-locking pushbutton switch

Quick specs

Item Type
Controller Board
Compatibility
General Purpose
Input Voltage (VAC)
100
Width (mm)
50
Weight (g)
249
Shipping Weight
0.179 kg
See all specifications