
1 / 4 · Click to enlarge
AI Summary
The Makerbase MKS TFT24 is a 2.4-inch LCD touch screen that adds a compact, colorful control interface to your 3D printer. It is compatible with Marlin and Smoothieware firmware and supports seven languages for easy operation.
Key Highlights
- 2.4-inch LCD touch screen for 3D printer control
- STM32F103 32-bit ARM Cortex-M3 microcontroller at 72 MHz
- Compatible with Marlin and Smoothieware firmware
- Supports seven languages for international users
- Compact 87 x 50 mm size and lightweight 54 g design
- Simple plug-and-play connection to open-source mainboards
Ideal For
- 3D printer owners upgrading from a basic text LCD
- Makers building custom 3D printers with open-source mainboards
- Users who prefer touch-based control over rotary encoders
- International users needing multi-language interface support
- Hobbyists adding a compact control panel to tight printer enclosures
Buying Tip
Confirm that your 3D printer mainboard runs Marlin or Smoothieware firmware and can supply 5 VDC to the display before purchasing.
Elecvora expert review
Our verdict
The Makerbase MKS TFT24 is a practical, compact touch screen that adds a modern control interface to 3D printers running Marlin or Smoothieware. It is easy to integrate and offers a clear upgrade over basic text-based LCDs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 2.4-inch touch screen with intuitive interface
- Broad firmware compatibility with Marlin and Smoothieware
- Lightweight and easy to mount on most printer frames
- Supports seven languages for international users
Cons
- Requires a compatible mainboard running Marlin or Smoothieware
- No enclosure or mounting hardware included
- Limited to 5 VDC input, so power source must be verified
Best for
3D printer owners wanting a simple touch screen upgrade for open-source firmware printers
Not ideal for
Printers with proprietary firmware or those needing a larger display
Specifications
| Item Type | Controller with Display |
|---|---|
| Compatibility | General Purpose |
| Input Voltage (VDC) | 5 |
| Display Size (Inch) | 2.4 |
| Display Type | LCD |
| Microcontroller | STM32F103 |
| MCU Type | 32 bit ARM cortex-M3 (72MHz) |
| Supported | 7 Languages |
| Firmware Compatible | Smoothieware, Marlin |
| Length (mm) | 87 |
| Width (mm) | 50 |
| Weight (g) | 54 |
| Shipping Weight | 0.057 kg |
| Shipping Dimensions | 7 × 4 × 3 cm |
What's in the box
- 1 x Makerbase MKS TFT24 2.4 inch Mini 3D Printer LCD Touch Screen
- 1 x Cable
Frequently Asked Questions
What firmware is the MKS TFT24 compatible with?
What is the input voltage for the display?
What is included in the package?
How many languages does the interface support?
What are the dimensions and weight of the screen?
Do I need additional software to use this screen?
Overview
The Makerbase MKS TFT24 is a 2.4-inch LCD touch screen module that gives your 3D printer a direct, graphical control interface. Instead of relying on a computer or a basic text-based controller, you can navigate menus, adjust settings, and start prints using a colorful touch display. The unit is built around a 32-bit STM32F103 ARM Cortex-M3 microcontroller running at 72 MHz, which manages the screen and touch input independently, so it works smoothly alongside your printer's mainboard.
Key Features
- Touch control: The 2.4-inch LCD screen responds to touch, making menu navigation quick and intuitive.
- Firmware compatibility: Works with Marlin and Smoothieware, two of the most common open-source 3D printer firmware platforms.
- Multi-language support: The interface is available in seven languages, suiting users around the world.
- Compact and light: At 87 mm long, 50 mm wide, and just 54 g, it fits easily on most printer frames without adding bulk.
- Plug-and-play design: Connects directly to compatible open-source mainboards with the included cable.
Specifications Explained
Display size and type: The 2.4-inch LCD is large enough to show clear menus and status information while remaining small enough for tight spaces on a printer.
Microcontroller: The STM32F103 is a 32-bit ARM Cortex-M3 chip running at 72 MHz. This gives the screen enough processing power to handle the graphical interface and touch input without slowing down your printer's mainboard.
Input voltage: The module requires 5 VDC, which is commonly available from the printer's mainboard or a USB connection, depending on your setup.
Dimensions and weight: The 87 x 50 mm board and 54 g weight mean it can be mounted with minimal impact on your printer's motion system or enclosure.
Compatibility and Requirements
The MKS TFT24 is designed for general-purpose use with 3D printers that run Marlin or Smoothieware firmware. It connects to open-source mainboards and is intended as a plug-and-play upgrade. A 5 VDC power source is required, and the included cable is used to link the display to your mainboard. No additional software or drivers are needed beyond your existing printer firmware.
Typical Uses
This touch screen is ideal for makers who want to control their 3D printer without a computer. It is useful for upgrading older printers that lack a graphical interface, for building custom machines where a compact control panel is needed, and for anyone who prefers a touch-based menu over rotary encoders or text-only LCDs.
What's in the Box
- 1 x Makerbase MKS TFT24 2.4-inch Mini 3D Printer LCD Touch Screen
- 1 x Cable
Quick specs
- Item Type
- Controller with Display
- Compatibility
- General Purpose
- Input Voltage (VDC)
- 5
- Display Size (Inch)
- 2.4
- Display Type
- LCD
- Microcontroller
- STM32F103



















