
1 / 4 · Click to enlarge
AI Summary
A compact 32-bit 3D printer controller board built on the STM32F407VET6 at 168 MHz, with a six-axis motor interface and 12–24 VDC input. Its virtual USB device and USB disk support make firmware and file handling simpler for custom builds.
Key Highlights
- 32-bit STM32F407VET6 microcontroller running at 168 MHz
- Six-axis motor interface for multi-motor printer layouts
- Flexible 12–24 VDC input range for common printer supplies
- Virtual USB device and USB disk support for file handling
- Compact 110 × 85 mm board weighing only 84 g
- General-purpose compatibility for custom and upgrade builds
Ideal For
- Makers upgrading a 3D printer to a 32-bit controller
- Builders assembling a custom printer with a compact electronics bay
- Users replacing a failed or outdated control board
- Hobbyists who need a six-axis motor interface
- Projects that benefit from USB disk file handling
Buying Tip
Check that your printer's power supply and wiring match the 12–24 VDC input and six-axis layout before ordering, since this is a general-purpose board rather than a drop-in model-specific replacement.
Elecvora expert review
Our verdict
A tidy 32-bit controller that packs a 168 MHz STM32F407VET6 and a six-axis interface into a small 110 × 85 mm board. It is a sensible pick for builders who want modern processing and USB flexibility without a large footprint.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fast 168 MHz 32-bit microcontroller
- Six-axis motor interface adds flexibility
- Wide 12–24 VDC input range
- Compact and lightweight at 84 g
- Virtual USB device and USB disk support
Cons
- General-purpose board requires your own firmware configuration
- No model-specific wiring guide supplied
- Power supply and peripherals are not included
Best for
Custom 3D printer builds and 32-bit controller upgrades
Not ideal for
Users wanting a plug-and-play, model-specific replacement board
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | General Purpose |
| Input Voltage (VDC) | 12–24 |
| Microcontroller | STM32F407VET6 |
| MCU Type | STM32F407VET6 (168Mhz) |
| Motor Interface | 6 Axis |
| Supported | Virtual USB Device, USB Disk |
| Length (mm) | 110 |
| Width (mm) | 85 |
| Weight (g) | 84 |
| Shipping Weight | 0.115 kg |
| Shipping Dimensions | 17.5 × 13 × 2 cm |
What's in the box
- 1 × MakerBase MKS Robin Nano V3 Control Board
- 1 × Connector Cable
Frequently Asked Questions
What microcontroller does this board use?
What input voltage does it accept?
How many motors can I connect?
Does it support USB?
What is included with the board?
Is it compatible with my printer?
Overview
The MakerBase MKS Robin Nano V3 is a 32-bit control board for 3D printers, built around the STM32F407VET6 microcontroller clocked at 168 MHz. It is designed as a general-purpose controller, so it fits a wide range of builds rather than a single closed ecosystem. At 110 mm long and 85 mm wide, with a weight of 84 g, it keeps a small footprint inside the electronics enclosure while still offering a six-axis motor interface.
Power input is rated at 12–24 VDC, covering the supply voltages commonly used on desktop 3D printers. The board also supports virtual USB device and USB disk operation, which gives builders practical options for connecting to a host and handling files during setup and everyday use.
Key Features
- STM32F407VET6 at 168 MHz: a 32-bit microcontroller for responsive motion and command processing.
- Six-axis motor interface: enough driver channels for printers that use additional axes or multiple motors.
- 12–24 VDC input: works across the two most common printer power configurations.
- Virtual USB device and USB disk support: flexible connectivity for host communication and file transfer.
- Compact dimensions: 110 × 85 mm and 84 g, easy to fit into tight electronics bays.
Specifications Explained
Microcontroller
The STM32F407VET6 is a 32-bit MCU running at 168 MHz. In practice, this means the board can handle motion planning and peripheral tasks with headroom, which matters when you add features or run more complex print jobs.
Motor interface
Six axis outputs give you room beyond a basic three-axis layout. Builders using extra motors or non-standard kinematics can map those channels to their needs.
Input voltage
The 12–24 VDC range lets the board run from either a 12 V or 24 V printer supply, so you can match it to the PSU you already have.
Connectivity
Virtual USB device support allows the board to present itself to a connected computer, while USB disk support adds a convenient way to work with files without relying only on a host connection.
Compatibility and Requirements
The board is listed as general purpose, so compatibility depends on your printer's wiring, drivers and firmware configuration rather than a fixed model list. It requires a 12–24 VDC power supply and a host or USB storage device if you intend to use the USB features. Plan your wiring and firmware setup around the six-axis motor interface and confirm your peripherals match the board's connections before installation.
Typical Uses
- Upgrading an existing 3D printer to a 32-bit controller.
- Building a custom printer from scratch with a compact electronics layout.
- Replacing a failed or outdated control board.
- Projects that need a six-axis motor interface and USB disk file handling.
What's in the Box
- 1 × MakerBase MKS Robin Nano V3 Control Board
- 1 × Connector Cable
Quick specs
- Item Type
- Controller Board
- Compatibility
- General Purpose
- Input Voltage (VDC)
- 12–24
- Microcontroller
- STM32F407VET6
- MCU Type
- STM32F407VET6 (168Mhz)
- Motor Interface
- 6 Axis



















