
1 / 4 · Click to enlarge
AI Summary
The MIKROE Alcohol Click is a mikroBUS add-on board featuring the MQ-3 alcohol gas sensor with an analog output for concentrations from 0.04 to 4 mg/l. It operates on 3.3 to 5 V and includes an on-board potentiometer for easy calibration.
Key Highlights
- MQ-3 semiconductor sensor for alcohol detection
- Measures alcohol concentrations from 0.04 to 4 mg/l
- Analog output via AN pin on mikroBUS
- Operating voltage range of 3.3 to 5 V
- On-board potentiometer for load resistance adjustment
- Compact board size of 42.9 x 25.4 mm
Ideal For
- Embedded developers building breathalyzer prototypes
- Students learning about gas sensors and analog interfaces
- Makers adding alcohol detection to mikroBUS projects
- Engineers testing alcohol sensing in controlled environments
Buying Tip
Remember that the MQ-3 sensor needs a warm-up period and periodic calibration using the on-board potentiometer for reliable readings in your specific environment.
Elecvora expert review
Our verdict
The MIKROE Alcohol Click offers a convenient, well-built way to add alcohol sensing to mikroBUS projects. Its analog output and adjustable potentiometer make it accessible, though it requires calibration and warm-up for accurate results.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ready-to-use mikroBUS board with no extra wiring
- Wide operating voltage range of 3.3 to 5 V
- On-board potentiometer for easy calibration
- Compact and lightweight design
Cons
- Requires an ADC on the host microcontroller
- Needs warm-up and periodic calibration for reliable readings
- Sensor is sensitive to environmental conditions
Best for
Developers and students building alcohol sensing prototypes with mikroBUS systems
Not ideal for
Applications requiring certified or medical-grade breath alcohol measurement
Specifications
| Item Type | Gas Sensor |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| Concentration | 0.04-4mg/l alcohol |
| Sensitivity | Rs(in air)/Rs(0.4mg/alcohol)≥5 |
| Compatibility | mikroBUS |
| Board Size (mm) | 42.9 x 25.4 mm |
| Interface | Analog |
| Shipping Weight | 0.07 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
What's in the box
- 1 x MIKROE Alcohol Click (MIKROE-1586) – MQ-3 Alcohol Gas Sensor Board
Frequently Asked Questions
What is the detection range of this sensor?
What voltage does the board require?
How do I connect it to my microcontroller?
Is the sensor calibrated out of the box?
What is included in the package?
Does the sensor need warm-up time?
Overview
The MIKROE Alcohol Click (MIKROE-1586) is a mikroBUS-compatible add-on board that carries the MQ-3 semiconductor alcohol gas sensor. It is designed to give your microcontroller project a straightforward way to sense alcohol vapour. The sensor's conductivity changes with alcohol concentration, and the board outputs an analog voltage that reflects this change. With a detection range of 0.04 to 4 mg/l, it suits breathalyzer experiments, portable detectors, and general gas-sensing projects.
Key Features
- MQ-3 sensor: a tin dioxide (SnO2) semiconductor layer whose conductivity rises as alcohol gas levels increase.
- Analog interface: the output is available on the AN pin of the mikroBUS socket, ready for an ADC input on your host board.
- Adjustable sensitivity: a small potentiometer on the board lets you set the load resistance to calibrate the sensor for your specific environment.
- Flexible power: operates from a 3.3 V or 5 V supply, matching common development boards.
- Compact footprint: the 42.9 x 25.4 mm board plugs directly into a mikroBUS socket, saving wiring time.
Specifications Explained
Concentration range (0.04–4 mg/l): this is the span of alcohol concentration the sensor is intended to detect. It covers the low levels relevant to breath alcohol estimation as well as higher concentrations found in controlled test setups.
Sensitivity (Rs in air / Rs at 0.4 mg/l ≥ 5): this ratio indicates how much the sensor resistance drops when exposed to alcohol. A value of at least 5 means a clear signal change, which helps your ADC distinguish alcohol presence from clean air.
Operating voltage (3.3–5 V): the board can be powered from either a 3.3 V or 5 V rail, so it works with a wide range of mikroBUS host boards.
Analog output: the sensor's analog voltage is presented on the AN pin. You will need an ADC on your microcontroller to read it; the board does not include a digital converter.
Compatibility and Requirements
The board is designed for any development system with a mikroBUS socket. It communicates solely through the AN pin, so your host microcontroller must have an analog-to-digital converter available on that pin. Power the board from a 3.3 V or 5 V supply within the stated range. No additional components are required for basic operation, though you may need to calibrate the potentiometer for your environment.
Typical Uses
- Portable alcohol detector prototypes
- Breathalyzer projects for estimating blood alcohol content (BAC)
- Gas-sensing experiments in educational or laboratory settings
- Adding alcohol detection to IoT or embedded monitoring devices
What's in the Box
1 x MIKROE Alcohol Click (MIKROE-1586) – MQ-3 Alcohol Gas Sensor Board.
Quick specs
- Item Type
- Gas Sensor
- Operating Voltage (V)
- 3.3 to 5
- Concentration
- 0.04-4mg/l alcohol
- Sensitivity
- Rs(in air)/Rs(0.4mg/alcohol)≥5
- Compatibility
- mikroBUS
- Board Size (mm)
- 42.9 x 25.4 mm


















