Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The MIKROE CO Click is a mikroBUS expansion board carrying the MQ-7 carbon monoxide sensor with a 20-2000 ppm detection range. It outputs an analog signal on the AN pin and runs from a 5V supply, with an onboard potentiometer for calibration.

Key Highlights

  • MQ-7 sensor detects carbon monoxide from 20 to 2000 ppm
  • Analog output on the AN pin for easy microcontroller reading
  • Onboard potentiometer for sensor calibration
  • 5V power supply required
  • Two jumpers for board configuration
  • Power indicator LED for quick status check

Ideal For

  • Embedded developers using mikroBUS development boards
  • Students learning about analog gas sensors
  • Makers building indoor air quality monitors
  • Engineers prototyping CO detection systems
  • Electronics educators demonstrating sensor calibration

Buying Tip

Confirm that your development board provides a 5V supply and a mikroBUS socket with an ADC channel on the AN pin before purchasing.

Elecvora expert review

Our verdict

The MIKROE CO Click is a well-executed sensor breakout that makes MQ-7 carbon monoxide sensing accessible to mikroBUS users. It removes the need for custom analog circuitry and provides a calibration point on the board, though it is best suited to prototyping and educational use rather than safety-critical applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple analog interface on the AN pin
  • Onboard calibration potentiometer
  • Direct mikroBUS compatibility
  • Clear 20-2000 ppm detection range
  • Power LED for quick status indication

Cons

  • Requires a 5V supply, limiting use with 3.3V-only systems
  • MQ-7 sensor needs warm-up time for stable readings
  • Not a calibrated safety device; requires user interpretation

Best for

Prototyping and educational CO sensing with mikroBUS development boards

Not ideal for

Safety-critical carbon monoxide alarms or portable consumer detectors

Specifications

Item TypeGas Sensor
Power Supply Voltage (V)5
On-Board Sensors (Y/N)MQ-7 sensor
Sensor rangeMQ-7 20ppm-2000ppm of CO
Onboardpotentiometer
Shipping Weight0.05 kg
Shipping Dimensions6 × 4 × 3 cm

What's in the box

  • 1 x MIKROE CO Click (MIKROE-1626) board with MQ-7 sensor

Frequently Asked Questions

What is the detection range of the MQ-7 sensor on this board?
The MQ-7 sensor can detect carbon monoxide concentrations from 20 ppm to 2000 ppm.
What power supply does the CO Click require?
The board requires a 5V power supply. It is not designed to operate from a 3.3V supply alone.
How does the board communicate with a microcontroller?
It provides an analog output on the AN pin of the mikroBUS interface, which you read with an ADC.
Is the MQ-7 sensor pre-installed?
Yes, the MQ-7 sensor is already mounted on the board. The package includes the assembled Click board.
Can I adjust the sensor sensitivity?
Yes, there is an onboard potentiometer that allows you to calibrate the output for your specific application.
Does the board come with software or libraries?
No software is included in the box. You will need to write or source code to read the analog value and interpret it.

Overview

The MIKROE CO Click (MIKROE-1626) is a compact add-on board that brings carbon monoxide sensing to any system with a mikroBUS host socket. At its core is the MQ-7 gas sensor, a tin dioxide (SnO2) based element whose conductivity changes with the presence of CO. The board converts that change into an analog voltage available on the AN pin, so your microcontroller can read it with a standard ADC. A 5V supply powers the board, and an onboard potentiometer lets you trim the output for your specific setup. Two jumpers and a power LED round out the board, making it a practical building block for gas-sensing projects.

Key Features

  • MQ-7 sensor: sensitive to carbon monoxide across a 20 to 2000 ppm range.
  • Analog output: communicates over the AN pin of the mikroBUS line.
  • Calibration potentiometer: adjust the sensor response on the board itself.
  • 5V operation: matches common microcontroller and development board supplies.
  • mikroBUS form factor: plugs directly into compatible host sockets.
  • Visual indicators: power LED and two jumpers for configuration.

Specifications Explained

The 20 to 2000 ppm detection range means the sensor is intended for measuring carbon monoxide concentrations from trace levels up to fairly high values. It is not a precision instrument, but it gives a clear analog response that you can calibrate and interpret in your firmware. The 5V power supply is a strict requirement; the board is not designed for 3.3V-only systems without level considerations. The analog interface on the AN pin keeps things simple: one ADC channel is all you need to start reading data. The onboard potentiometer provides a hardware adjustment point, which is useful when setting a reference threshold or compensating for sensor variation. Finally, the mikroBUS host socket ensures mechanical and electrical compatibility with a wide range of development boards that follow the standard.

Compatibility and Requirements

This board requires a host system with a mikroBUS socket and a 5V power supply. The microcontroller must have an analog-to-digital converter connected to the AN pin to read the sensor output. No additional libraries or drivers are strictly necessary for basic operation, though you will need to write or source code to interpret the analog readings. The board ships with the MQ-7 sensor already mounted, so no soldering of the sensor itself is required.

Typical Uses

  • Carbon monoxide detection experiments and educational projects.
  • Indoor air quality monitoring prototypes.
  • Gas alarm development and threshold testing.
  • Embedded systems courses covering analog sensors.
  • Adding gas sensing to mikroBUS-based IoT devices.

What's in the Box

Package includes one MIKROE CO Click (MIKROE-1626) board with the MQ-7 sensor fitted. No other accessories are included.

Quick specs

Item Type
Gas Sensor
Power Supply Voltage (V)
5
On-Board Sensors (Y/N)
MQ-7 sensor
Sensor range
MQ-7 20ppm-2000ppm of CO
Onboard
potentiometer
Shipping Weight
0.05 kg
See all specifications