Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The MINI560 is a compact non-isolated buck converter that steps 14-32V DC down to a stable 12V output at up to 4A. Its synchronous rectifier design and moulded inductor deliver up to 95% efficiency in a small, lightweight module.

Key Highlights

  • Non-isolated buck converter with 12V stabilized output
  • Wide 14-32V DC input voltage range
  • Output current up to 4A for moderate loads
  • Up to 95% conversion efficiency with synchronous rectification
  • 500kHz switching frequency for compact design
  • Operates from -40°C to +85°C

Ideal For

  • Makers building DIY mobile power banks
  • RC and aviation model enthusiasts needing lightweight power regulation
  • Technicians repairing or upgrading monitor power supplies
  • Hobbyists powering cameras from higher-voltage sources
  • Electronics learners experimenting with buck converters

Buying Tip

Confirm your input source stays within 14-32V and your load does not exceed 4A, and add a small heatsink if you plan to run near the current limit continuously.

Elecvora expert review

Our verdict

The MINI560 is a capable and compact buck converter that offers a useful 12V rail from a wide input range with high efficiency. It is a solid choice for space- and weight-sensitive projects where a simple, reliable step-down solution is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 14-32V input range
  • Up to 95% efficiency
  • Compact and lightweight
  • Stabilized 12V output
  • Wide operating temperature range

Cons

  • Non-isolated design requires common ground
  • Output current limited to under 4A
  • No enclosure or connectors included

Best for

DIY electronics and RC projects needing a lightweight 12V regulator

Not ideal for

High-current applications above 4A or setups requiring isolation

Specifications

Model No. / NameMINI560
Output Voltage12
Input Voltage (V)14-32
Output Current (A)<4
Switching frequency500
Conversion efficiency95% (limit high)
Operating Temperature (°C)-40 to +85
Module TypeNon-Isolated Buck
Shipping Weight0.005 kg
Shipping Dimensions8 × 4 × 2 cm

What's in the box

  • 1 x MINI560 DC 12V 5A Step-Down Stabilized Module

Frequently Asked Questions

What is the input voltage range of the MINI560?
The module accepts a DC input from 14V to 32V.
Can I use this module to charge a 12V battery?
No, this is a step-down voltage regulator, not a battery charger. It provides a stabilized 12V output but does not include charging logic.
What is the maximum output current?
The output current is rated at less than 4A. For reliable operation, keep your load below this limit.
Is the output isolated from the input?
No, this is a non-isolated buck converter, so the input and output share a common ground.
What comes in the package?
The package includes one MINI560 DC-DC 12V 5A step-down stabilized module.
Do I need a heatsink?
A heatsink is not required for light loads, but if you operate near the 4A limit continuously, adding airflow or a small heatsink is recommended.

Overview

The MINI560 is a non-isolated step-down (buck) converter module designed to provide a stable 12V output from a higher DC input. It accepts 14V to 32V and delivers up to 4A, making it a practical solution for projects that need a reliable 12V rail without the bulk of a traditional power supply. The module uses an integrally moulded power inductor and a synchronous rectifier control chip, which contribute to its compact size and high efficiency.

Key Features

  • Stabilized 12V output: Provides a regulated 12V supply for sensitive electronics.
  • Wide input range: Works with input voltages from 14V to 32V DC.
  • Up to 4A output current: Suitable for moderate power demands.
  • High efficiency: Conversion efficiency up to 95% helps reduce heat and power loss.
  • 500kHz switching frequency: Enables a small module footprint.
  • Wide operating temperature: Rated for -40°C to +85°C.
  • Lightweight: Shipping weight only 0.005 kg, ideal for weight-sensitive builds.

Specifications Explained

Input voltage (14-32V): The module requires at least 14V to operate and can safely accept up to 32V. This range covers many common power sources such as 12V lead-acid batteries under charge, 24V systems, and multi-cell lithium packs.

Output voltage (12V): The output is stabilized at 12V, making it suitable for devices and subsystems that expect a 12V supply.

Output current (<4A): The module can deliver up to 4A. For continuous operation, keep the load within this limit and ensure adequate cooling if running near the maximum.

Conversion efficiency (95%): High efficiency means less energy is wasted as heat, which is especially important in enclosed or weight-critical applications.

Switching frequency (500kHz): A higher switching frequency allows the use of smaller inductors and capacitors, contributing to the module's compact size.

Operating temperature (-40°C to +85°C): The module is designed to function in a wide range of environmental conditions, from extreme cold to high heat.

Compatibility and Requirements

The MINI560 is a non-isolated buck converter, so the input and output share a common ground. It requires a DC input between 14V and 32V and a load that draws no more than 4A at 12V. No additional external components are specified for basic operation, but proper wiring and soldering are necessary to connect the module to your circuit. Ensure that the input source can supply enough current for the load plus conversion losses.

Typical Uses

  • DIY mobile power projects
  • Monitor power supplies
  • Camera power supply
  • Car power accessories
  • Communications equipment
  • Aviation models and other weight-sensitive applications

What's in the Box

1 x MINI560 DC 12V 5A Step-Down Stabilized Module

Quick specs

Model No. / Name
MINI560
Output Voltage
12
Input Voltage (V)
14-32
Output Current (A)
&lt;4
Switching frequency
500
Conversion efficiency
95% (limit high)
See all specifications