
1 / 3 · Click to enlarge
AI Summary
A tiny step-down module that converts 6 to 32V DC input into a stable 5V output at up to 5A. Its 2.9 x 1.8 x 0.54 cm PCB and low weight make it easy to fit into compact RC, FPV and DIY builds.
Key Highlights
- 6 to 32V DC input with regulated 5V output
- Delivers up to 5A supply current
- Compact 2.9 x 1.8 x 0.54 cm PCB footprint
- Operates from -40 to +85 °C
- Integrally moulded power inductor for efficient conversion
- Lightweight module at about 5 grams
Ideal For
- FPV pilots needing a compact 5V rail for cameras and accessories
- RC hobbyists building weight-sensitive models
- DIY electronics makers converting battery voltage to 5V
- Drone builders powering 5V peripherals from a higher-voltage pack
- Hobbyists repairing or upgrading small DC power projects
Buying Tip
Check that your input source stays within 6 to 32V and that your total load stays under 5A before wiring the module in.
Elecvora expert review
Our verdict
The MINI560 packs a 6 to 32V input range and 5A output into a very small PCB, which suits tight RC and FPV builds. It is a straightforward module for anyone comfortable soldering their own connections.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact 2.9 x 1.8 x 0.54 cm board
- Wide 6 to 32V input range
- 5A output current
- Wide -40 to +85 °C operating range
- Light weight of about 5 grams
Cons
- No connectors or wiring included
- Fixed 5V output only
- Load must stay within the 5A rating
Best for
RC, FPV and DIY projects that need a small regulated 5V rail
Not ideal for
Users who need an adjustable output or a plug-and-play module with connectors
Specifications
| Model No. / Name | MINI560 |
|---|---|
| Supply Current | 5A |
| Power Supply Voltage (V) | 5V |
| Material | PCB |
| Size (mm) | 2.9x1.8x0.54cm |
| Input Voltage (V) | 6 to 32 |
| Operating Temperature (°C) | -40 to +85 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 4 × 2 cm |
Frequently Asked Questions
What input voltage does the MINI560 accept?
How much current can it supply?
Does it come with wires or connectors?
Can I use it with a 2S or 3S LiPo pack?
Is the output adjustable?
How should I care for the module?
Overview
The MINI560 is a step-down stabilized module designed to turn a higher DC voltage into a clean, regulated 5V rail. It accepts an input between 6V and 32V and supplies up to 5A at 5V, making it a practical building block for projects that run from multi-cell battery packs or other higher-voltage DC sources. The board uses an integrally moulded power inductor and a synchronous rectifier control chip, which keeps the circuit compact and efficient.
With a PCB size of just 2.9 x 1.8 x 0.54 cm and a shipping weight of roughly 5 grams, the module is easy to tuck into small enclosures, airframes and handheld projects where full-size converters will not fit.
Key Features
- Wide 6 to 32V DC input range with a fixed 5V output
- Up to 5A supply current for moderate-load electronics
- Compact PCB construction measuring 2.9 x 1.8 x 0.54 cm
- Integrally moulded power inductor and synchronous rectifier control chip
- Operating temperature range of -40 to +85 °C
- Lightweight design at approximately 5 grams
Specifications Explained
Input and output voltage
The 6 to 32V input range covers many common DC sources, from small battery packs to larger multi-cell setups. The output is stabilized at 5V, so connected electronics receive a steady rail rather than a voltage that falls as the source drains.
Supply current
A 5A current rating means the module can feed several small devices or one moderately demanding load, provided the input source and wiring can support the current.
Size and weight
At 2.9 x 1.8 x 0.54 cm and about 5 grams, the module adds very little bulk or mass. That makes it suitable for weight-sensitive builds as well as compact DIY enclosures.
Operating temperature
The -40 to +85 °C range allows the module to operate in cold outdoor conditions and in warmer enclosures, within those limits.
Compatibility and Requirements
The module requires a DC input between 6V and 32V; the input must always remain above the 5V output for step-down operation. Wiring and connectors are not included, so you will need to solder or otherwise connect the input and output pads yourself. Confirm that your load does not exceed 5A and that your power source can deliver the required input current.
Typical Uses
- Providing a 5V rail in RC and FPV models
- Powering cameras and video equipment from a higher-voltage pack
- DIY mobile power projects
- Monitor and communications equipment supply
- Car and vehicle accessory power
What's in the Box
Package contents are not specified for this listing. Please check the product data before ordering if you need to confirm what is included.
Quick specs
- Model No. / Name
- MINI560
- Supply Current
- 5A
- Power Supply Voltage (V)
- 5V
- Material
- PCB
- Size (mm)
- 2.9x1.8x0.54cm
- Input Voltage (V)
- 6 to 32













