Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.4-inch TFT HMI module with integrated resistive touch, 320x240 resolution and 4MB flash. It connects to your host over a single TTL serial UART, keeping wiring simple.

Key Highlights

  • 2.4-inch TFT display with 320x240 pixel resolution
  • Integrated 4-wire resistive touch panel
  • 65K color output for clear interface graphics
  • 4MB flash for user code and data storage
  • Single TTL serial UART connection, 4-pin 2.54mm interface
  • Micro SD slot for FAT32 firmware upgrades up to 32GB

Ideal For

  • Arduino and Raspberry Pi project builders adding a touch interface
  • IoT developers needing a compact serial-driven display
  • Makers replacing LCD or LED readouts with an interactive panel
  • Equipment designers building small control and monitoring panels
  • Students and educators learning HMI interface design

Buying Tip

Confirm your host board has a spare TTL serial UART and plan a stable 5V, 500mA supply before ordering, since the module has no USB port.

Elecvora expert review

Our verdict

The NX3224T024 is a tidy, low-wiring HMI module for small projects that need a touch interface without a separate display and controller. Its single-UART design and onboard flash keep integration straightforward, though the modest screen size and resistive panel suit panel controls more than rich graphics.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Single TTL serial interface reduces wiring
  • 4MB flash stores user code and data
  • Micro SD slot simplifies firmware updates
  • Wide 4.75 to 7 VDC input range
  • Compact 74.4 x 42.9 x 5.8mm footprint

Cons

  • No USB interface on the board
  • Resistive touch is less suited to multi-touch use
  • Small 2.4-inch screen limits complex layouts

Best for

Compact serial-driven control panels for Arduino, Raspberry Pi and IoT projects

Not ideal for

Projects needing a large, multi-touch capacitive display

Specifications

Model No. / NameNX3224T024
Touch TypeResistive
Display TypeNX3224T024_011R (R: Resistive touchscreen)
Operating Voltage (VDC)4.75 ~ 7
Max. Operating Current (A)90
Display Layout Size (mm)74.4 × 42.9 × 5.8
Weight (g)31
Recommended Power Supply5V, 500mA, DC
Operating humidity10% to 90% RH
USB Interface (Y/N)No
Micro SD Card Slot (Y/N)Yes (FAT32 format), support maximum 32G Micro SD Card
Flash Memory4 MB
RAM3584 BYTE
Color65K (65536)
Operating Temperature (°C)-20 to 70°C
Shipping Weight0.033 kg
Shipping Dimensions10 × 6 × 3 cm

Frequently Asked Questions

How does the display connect to my board?
It communicates through a single TTL serial port using a 4-pin 2.54mm interface. Your host only needs a free UART with matching TX and RX lines.
What power supply should I use?
The module accepts 4.75 to 7 VDC and draws up to 90mA. NEXTION recommends a 5V, 500mA DC supply.
Can I update the firmware?
Yes. The onboard micro SD slot accepts FAT32-formatted cards up to 32GB for firmware upgrades.
Is it compatible with Raspberry Pi and Arduino?
It is described as compatible with Raspberry Pi A+, B+ and Raspberry Pi 2, and as a generic fit for Arduino or Raspberry Pi projects with a TTL serial host.
Does it have a USB port?
No. There is no USB interface on the board, so all communication goes through the serial connection.
What are the operating conditions?
The display is rated for -20 to 70 degrees Celsius and 10 to 90 percent relative humidity.

Overview

The NEXTION NX3224T024 is a 2.4-inch intelligent HMI display module built to give machines, appliances and IoT devices a simple human interface. It combines a 320x240 TFT panel, a 4-wire resistive touchscreen and the supporting electronics on one compact board measuring 74.4 x 42.9 x 5.8 mm. Instead of wiring a display and touch controller separately, you communicate with the module over one TTL serial port.

This makes it a practical replacement for traditional LCDs and LED Nixie tube displays where you need interaction, not just output. The screen renders 65K colors, and brightness can be adjusted across a range of 0 to 180 nits in 1 percent steps.

Key Features

  • 320x240 resolution TFT screen with 65K true-to-life colors
  • Integrated 4-wire resistive touch panel
  • 4-pin 2.54mm TTL serial interface for host communication
  • 4MB flash memory for user application code and data
  • Micro SD card slot for firmware upgrades (FAT32, up to 32GB)
  • Adjustable brightness from 0 to 180 nits

Specifications Explained

Display and touch

The 320x240 panel gives you enough room for buttons, text fields, progress bars and simple instrument layouts. Resistive touch works with a finger or a stylus and is well suited to panel-mounted controls. The 65K color depth keeps interface elements readable and visually distinct.

Memory

4MB of flash stores your user application code and data, while 3584 bytes of RAM support runtime operation. For most interface projects this is enough for several screens of controls and indicators.

Power

The module accepts 4.75 to 7 VDC and draws a maximum of 90mA. NEXTION recommends a 5V, 500mA DC supply, which leaves headroom for the display and any attached micro SD card.

Environment

Operation is rated from -20 to 70 degrees Celsius with 10 to 90 percent relative humidity, covering typical indoor equipment enclosures.

Compatibility and Requirements

The NX3224T024 is described as compatible with Raspberry Pi A+, B+ and Raspberry Pi 2, and it is a generic fit for Arduino or Raspberry Pi projects. Your host needs a TTL serial UART; the module uses a 4-pin 2.54mm interface. There is no USB interface on the board, so programming and communication go through the serial connection. Firmware updates use a FAT32-formatted micro SD card of up to 32GB.

Typical Uses

  • Control panels for Arduino and Raspberry Pi projects
  • IoT device status and control interfaces
  • Equipment front panels replacing basic LCD or LED readouts
  • Appliance and machine monitoring displays
  • Prototype and educational HMI builds
Nextion_SoftwareNextion_Software

Quick specs

Model No. / Name
NX3224T024
Touch Type
Resistive
Display Type
NX3224T024_011R (R: Resistive touchscreen)
Operating Voltage (VDC)
4.75 ~ 7
Max. Operating Current (A)
90
Display Layout Size (mm)
74.4 × 42.9 × 5.8
See all specifications