
1 / 3 · Click to enlarge
AI Summary
The OpenMV Proto Shield gives your OpenMV Cam a 10x10 through-hole area with dedicated 3.3V and GND rails for custom circuits. It is a compact, solder-friendly way to add sensors, connectors, or other electronics to your vision projects.
Key Highlights
- 10x10 through-hole prototyping area for custom circuits
- Built-in 3.3V and GND rails connected to the OpenMV Cam
- Leaves all other I/O pins free for your own wiring
- Compact 27 x 35 mm footprint and only 5.1 g
- Compatible with OpenMV Cam (not included)
- Ideal for soldering sensors, connectors, and small components
Ideal For
- OpenMV Cam users adding custom sensors or circuits
- Makers and hobbyists building machine vision projects
- Students learning soldering and embedded electronics
- Engineers prototyping compact vision systems
- Drone and robotics enthusiasts needing lightweight expansion
Buying Tip
Remember that you will need to solder components and possibly the shield itself to your OpenMV Cam, so ensure you have a soldering iron and basic tools ready.
Elecvora expert review
Our verdict
The OpenMV Proto Shield is a simple yet highly practical accessory that makes adding custom electronics to your OpenMV Cam straightforward. Its built-in power rails and generous prototyping area save time and reduce wiring clutter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Convenient 3.3V and GND rails simplify power distribution
- Compact size and low weight do not interfere with camera operation
- 10x10 hole grid provides ample space for most small circuits
- Leaves all other I/O pins free for flexible routing
Cons
- Requires soldering skills and tools
- OpenMV Cam is not included
- No headers or connectors are provided
Best for
OpenMV Cam users who want to add custom sensors or circuits with minimal fuss
Not ideal for
Those who prefer solderless breadboards or need a pre-assembled expansion board
Specifications
| Length (mm) | 27 |
|---|---|
| Width (mm) | 35 |
| Weight (g) | 5.1 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x OpenMV Proto Shield
Frequently Asked Questions
What is the OpenMV Proto Shield used for?
Is the OpenMV Cam included?
What voltage do the power rails provide?
Do I need to solder to use this shield?
What are the dimensions of the Proto Shield?
How many prototyping holes does it have?
Overview
The OpenMV Proto Shield is a dedicated prototyping accessory for your OpenMV Cam. It provides a 10x10 grid of through-hole pads where you can solder custom circuitry, sensors, or connectors. Two continuous rails deliver 3.3V power and ground directly from the camera, while the rest of the I/O pins remain unconnected, giving you complete freedom to route signals as your project requires. At just 27 mm long and 35 mm wide, and weighing only 5.1 grams, the shield adds minimal bulk to your setup. It is an ideal solution for quickly iterating on machine vision prototypes without resorting to messy breadboards or loose wires.
Key Features
- 10x10 through-hole prototyping area: Plenty of space for soldering components, headers, or custom circuits.
- Built-in power and ground rails: The 3.3V and GND rails are pre-connected to the OpenMV Cam's own supply, simplifying power distribution.
- Uncommitted I/O pins: All other pins are left free, so you can wire them exactly as needed.
- Compact and lightweight: The 27 x 35 mm board and 5.1 g weight keep your build portable.
- OpenMV Cam compatible: Designed to mate directly with your OpenMV Cam (sold separately).
Specifications Explained
Length (27 mm) and Width (35 mm): These dimensions mean the shield is small enough to fit neatly on top of your OpenMV Cam without blocking access to other components. The 10x10 hole grid offers 100 solder points, which is ample for most small-scale expansions such as adding a temperature sensor, a button, or a small display connector.
Weight (5.1 g): The low weight ensures that the shield will not strain the camera module or affect balance in mobile or drone-based applications.
Power rails: The 3.3V and GND rails are directly tied to the OpenMV Cam's power supply, so you can power your added circuitry without extra regulators, as long as your components are compatible with 3.3V logic and supply.
Compatibility and Requirements
The OpenMV Proto Shield is designed for use with OpenMV Cam boards (not included). It requires soldering to attach components and to connect the shield to your camera if you choose to solder it directly. Basic soldering tools and skills are necessary. The shield does not include any active components, headers, or the OpenMV Cam itself.
Typical Uses
- Adding sensors such as temperature, humidity, or distance sensors to your OpenMV Cam.
- Creating custom connectors for external devices or communication interfaces.
- Prototyping small circuits that need a stable 3.3V supply and ground reference.
- Educational projects where students learn to solder and interface electronics with machine vision.
- Robotics and drone applications where a compact, lightweight expansion is essential.
What's in the Box
1 x OpenMV Proto Shield.
Quick specs
- Length (mm)
- 27
- Width (mm)
- 35
- Weight (g)
- 5.1
- Shipping Weight
- 0.001 kg
- Shipping Dimensions
- 1 × 1 × 1 cm



















