Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by OWON, this signal generator module & oscilloscopes is a good fit for makers, students and electronics hobbyists. Main specs: item type Waveform Generator; model no. / name DGE1060; no. of channels single + trigger.

Key Highlights

  • Item Type: Waveform Generator
  • Model No. / Name: DGE1060
  • No. of Channels: single + trigger

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWaveform Generator
Model No. / NameDGE1060
No. of Channelssingle + trigger
Frequency5MHz
Sample Rate125MS/s
Display4 inch (480 x 320 pixels) LCD
Communication InterfaceUSB device
Length (mm)200
Width (mm)68.5
Weight (g)500
Shipping Weight0.806 kg
Shipping Dimensions24 × 17.5 × 10 cm

Overview

The OWON DGE1060 1CH Waveform Generator- 60MHz, made by OWON, is listed in our signal generator module & oscilloscopes range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Waveform Generator
  • Model No. / Name: DGE1060
  • No. of Channels: single + trigger
  • Frequency: 5MHz (make sure the rest of your system works at this frequency)
  • Sample Rate: 125MS/s (your supply must deliver at least this much current)
  • Display: 4 inch (480 x 320 pixels) LCD (measured diagonally; compare with the space you have before ordering)
  • Communication Interface: USB device (confirm your cable or board uses the same connector)
  • Length (mm): 200 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Low Freq Arbitrary Waveform Generator is a single-channel arbitrary waveform generator designed for low-frequency applications. Low Freq Arbitrary Waveform Generator is  boasts a maximum output frequency of 60MHz, making it suitable for a wide range of testing and development needs. With a sample rate of 300MSa/s (megasamples per second), this device can generate complex and precise waveforms, crucial for accurate signal simulation and analysis. Its capabilities make it an ideal tool for engineers and technicians working with various electronic systems that require reliable and flexible waveform generation at lower frequencies.

Note: Due to import restrictions, the power cord is not included with this product. Please purchase the power cord separately if required.


Features:

  1. Advanced DDS technology, upto 10MHz frequency output
  2. 300MSa/s sample rate, and 1μHz frequency resolution
  3.  Vertical Resolution : 14 bits, and 8K arb waveform length
  4.  Comprehensive waveform output : 5 basic waveforms, and 45 built-in arbitrary waveforms
  5. Comprehensive modulation functions : AM, FM, PM, FSK, Sweep, and Burst
  6.  SCPI, and LabVIEW supported
  7. 4'' high resolution (480 x 320 pixels) LCD
  8. could work with OWON SDS Series DSO smoothly

Package Includes:

1 x OWON DGE1060 Waveform Generator

1 x  Alligator Clip

1 x USB Cable

1 x USB to DC Cord

1 x Quick Guide

Quick specs

Item Type
Waveform Generator
Model No. / Name
DGE1060
No. of Channels
single + trigger
Frequency
5MHz
Sample Rate
125MS/s
Display
4 inch (480 x 320 pixels) LCD
See all specifications

More from OWON

View all →

Related Products

View all →