Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact industrial pressure transducer measuring 0–1.2 MPa in non-corrosive gases and liquids, with a standard 4–20 mA output for PLC and control system integration. It runs on 10–32 V DC and uses a G1/4 connection with IP65 protection.

Key Highlights

  • 0–1.2 MPa working range for low to medium pressure monitoring
  • Standard 4–20 mA output for PLC and control system integration
  • Wide 10–32 V DC operating voltage for flexible supply options
  • IP65 housing resists dust and water in industrial environments
  • Fast response time of 10 ms or less for real-time readings
  • G1/4 process connection with 2.5 MPa overload capacity

Ideal For

  • Industrial automation engineers integrating pressure sensors into PLC panels
  • Maintenance technicians monitoring fluid and air pressure in machinery
  • Test bench and laboratory users needing a 4–20 mA pressure signal
  • System integrators building process control and monitoring loops

Buying Tip

Check that your PLC or controller accepts a 4–20 mA input and that the total loop resistance stays at or below 500 Ω before wiring the transducer.

Elecvora expert review

Our verdict

The PR18-A12C is a sensible mid-range transducer for anyone who needs a dependable 4–20 mA pressure signal without a complicated installation. Its wide voltage range, IP65 housing and fast response make it easy to fit into existing control systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 4–20 mA output suits most PLC analogue inputs
  • Wide 10–32 V DC supply range
  • IP65 housing and -20°C to +105°C operating range
  • Fast 10 ms response and 1,000,000-cycle life rating

Cons

  • Only suitable for non-corrosive gases and liquids
  • Loop resistance must be kept at or below 500 Ω
  • No mounting accessories or seal included in the box

Best for

Industrial pressure monitoring and process control loops

Not ideal for

Corrosive media or high-pressure systems above the stated limits

Specifications

Shipping Weight0.221 kg
Shipping Dimensions16 × 11 × 8 cm

What's in the box

  • 1 x Pro-Range PR18-A12C Pressure Transducer

Frequently Asked Questions

What pressure range does this transducer measure?
It is calibrated for a working range of 0 to 1.2 MPa, with an overload rating of 2.5 MPa and a burst pressure of 3.6 MPa.
What supply voltage does it need?
The PR18-A12C operates from 10 to 32 V DC, so it can be powered from a range of industrial control cabinet supplies.
What output signal does it provide?
It outputs a standard 4–20 mA current signal, which can be read by a PLC analogue input or a loop-powered display.
What media can it be used with?
It is designed for non-corrosive gases and liquids. Avoid corrosive media, which are outside its intended use.
What is included in the package?
The package contains one Pro-Range PR18-A12C pressure transducer. Fittings, seals and cables are not listed as included.
What is the maximum load resistance?
The load resistance in the current loop must not exceed 500 Ω for the transducer to operate correctly.

Overview

The Pro-Range PR18-A12C is a pressure transducer for measuring pressure in non-corrosive gases and liquids. It covers a working range of 0 to 1.2 MPa and converts that pressure into a 4–20 mA current loop signal, the standard format used by most industrial controllers. The body is rated IP65 and the sensor operates between -20°C and +105°C, so it can be mounted in cabinets, enclosures or sheltered outdoor installations.

Key Features

  • Accurate measurement: ±1.0% full-scale accuracy with an overall error of ±3.0% FS.
  • Current loop output: 4–20 mA signal that is simple to read with a PLC analogue input.
  • Flexible power: accepts any supply between 10 V and 32 V DC.
  • Fast response: reacts in 10 ms or less for near real-time pressure monitoring.
  • Pressure headroom: tolerates overloads up to 2.5 MPa and burst pressure up to 3.6 MPa.
  • Long service life: rated for at least 1,000,000 pressure cycles.

Specifications Explained

Pressure range and limits

The 0–1.2 MPa working range sets the span the transducer is calibrated to measure. Overload pressure of 2.5 MPa is the level it can briefly withstand without damage, while burst pressure of 3.6 MPa is the point of physical failure. Keep normal system pressure inside the working range and treat the overload figure as a safety margin, not an operating target.

Output and load

The 4–20 mA output is a two-wire current signal, so the same pair of wires carries the supply and the measurement. The load resistance must stay at or below 500 Ω for the loop to work correctly.

Accuracy and response

Measurement accuracy is ±1.0% FS, and the overall error including other effects is ±3.0% FS. The 10 ms response time means the output follows pressure changes quickly enough for most monitoring and control loops.

Connection and environment

The G1/4 thread is a common port size for pressure fittings, and the IP65 rating protects the housing from dust and water jets. The operating temperature range of -20°C to +105°C covers most industrial and outdoor cabinet conditions.

Compatibility and Requirements

The transducer needs a 10–32 V DC supply and a receiving device that accepts a 4–20 mA signal, such as a PLC analogue input or a loop-powered display. Loop resistance must not exceed 500 Ω. It is intended for non-corrosive gases and liquids only, and fits ports machined for a G1/4 thread.

Typical Uses

  • Fluid and air pressure monitoring in machine systems
  • Industrial process control and automation panels
  • Pump, compressor and pipeline pressure checks
  • Test benches and laboratory pressure measurement

What's in the Box

  • 1 x Pro-Range PR18-A12C pressure transducer

Quick specs

Shipping Weight
0.221 kg
Shipping Dimensions
16 × 11 × 8 cm
See all specifications