Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Pro-Range PR19C-RS-020K is a 0-20 kPa pressure sensor with RS485 output and a G1/4 thread. Its digital interface and 1 m cable make low-pressure monitoring easy to integrate into industrial control systems.

Key Highlights

  • 0-20 kPa range for precise low-pressure measurement
  • RS485 digital output for stable long-distance data
  • Standard G1/4 process thread for simple installation
  • 1-metre cable included for flexible mounting
  • 10-32 VDC wide operating voltage
  • Compact 30 mm diameter, 92 mm long body

Ideal For

  • HVAC technicians monitoring duct static pressure
  • Industrial automation engineers integrating RS485 sensors
  • Building controls specialists working on low-pressure loops
  • Process control technicians in clean rooms and labs
  • Makers building low-pressure data logging systems

Buying Tip

Confirm that your controller or PLC supports RS485 communication and that the G1/4 thread matches your existing port before ordering.

Elecvora expert review

Our verdict

The Pro-Range PR19C-RS-020K is a practical choice for low-pressure monitoring where a digital RS485 interface is preferred over analogue signals. Its wide voltage range and standard G1/4 thread make integration straightforward for industrial users.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • RS485 output supports longer cable runs and multi-drop networks
  • Wide 10-32 VDC supply suits common industrial power rails
  • Standard G1/4 thread simplifies fitting and replacement
  • Compact 30 mm body fits tight installations

Cons

  • Requires an RS485 master or controller; not a stand-alone device
  • Limited to low-pressure applications up to 20 kPa
  • No display or local indication on the sensor itself

Best for

HVAC and industrial low-pressure monitoring with RS485 networks

Not ideal for

High-pressure hydraulic or compressed-air systems

Specifications

Item TypePressure Sensor
Model No. / NamePR19C RS 020K
Operating Voltage (VDC)10 to 32
Working Pressure0 to 20 kPa
Signal OutputRS485
Cable Length1
Thread SizeG1/4
Length (mm)92
Diameter (mm)30⌀
Weight (g)207
Shipping Weight0.26 kg
Shipping Dimensions15 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range PR19C-RS-020K Pressure Sensor (0-20 kPa, RS485, G1/4, 1 m cable)

Frequently Asked Questions

What pressure range does this sensor measure?
The PR19C-RS-020K measures pressures from 0 to 20 kPa.
What is the output signal?
It provides an RS485 digital output for connection to compatible controllers and data acquisition systems.
What power supply does it require?
The sensor operates from 10 to 32 VDC, so it can be powered from common 12 V or 24 V DC supplies.
What thread size is the process connection?
It uses a standard G1/4 process thread.
Is a cable included?
Yes, a 1-metre cable is included with the sensor.
Can I use it with a standard PLC?
Yes, provided your PLC or controller has an RS485 communication port and supports the sensor's protocol as detailed in the datasheet.

Overview

The Pro-Range PR19C-RS-020K is a pressure transducer designed for low-pressure measurement in the 0 to 20 kPa range. It converts pressure into a digital RS485 signal, allowing direct connection to controllers, PLCs and data loggers without additional signal conditioning. The G1/4 process thread is a common industrial standard, and the supplied 1-metre cable simplifies wiring during installation. With a 30 mm diameter and 92 mm length, the sensor fits into compact assemblies while its 207 g weight indicates a solid, industrial-grade build.

Key Features

  • 0-20 kPa measurement range: Suited to low-pressure monitoring tasks where finer resolution is needed than higher-range sensors can provide.
  • RS485 digital output: Enables stable transmission over longer cable runs and easy integration into multi-drop networks.
  • G1/4 process connection: A widely used thread that matches many fittings, manifolds and pipe adapters.
  • 10-32 VDC operating voltage: Works with common 12 V and 24 V industrial supply rails.
  • 1-metre cable included: Provides enough length for most panel and duct installations without extra extension.
  • Compact dimensions: 30 mm diameter and 92 mm length allow installation in space-restricted areas.

Specifications Explained

Pressure range (0-20 kPa): This is a low-pressure sensor, best for measuring small positive pressures such as duct static pressure or filter differential pressure. It is not intended for high-pressure hydraulic or compressed-air systems.

Signal output (RS485): RS485 is a differential serial standard that resists electrical noise and supports longer cable runs than analogue outputs. Your receiving device must support RS485 communication and the sensor's protocol.

Operating voltage (10-32 VDC): The wide input range means the sensor can be powered from a 12 V or 24 V DC supply commonly found in control cabinets.

Thread size (G1/4): This is a 1/4-inch British Standard Pipe parallel thread. Ensure mating fittings are compatible; use appropriate sealing methods for your application.

Cable length (1 m): The included cable provides a ready-made connection. For longer runs, ensure any extension maintains RS485 signal integrity.

Compatibility and Requirements

The PR19C-RS-020K requires a 10-32 VDC power supply and a receiving device with RS485 capability. It is not a plug-and-play USB device; integration requires wiring to an RS485 master or data acquisition system. The G1/4 thread must match the port or adapter in your system. No other accessories are included beyond the sensor and cable.

Typical Uses

  • HVAC duct static pressure monitoring
  • Filter differential pressure indication
  • Clean-room and laboratory pressure control
  • Industrial process low-pressure monitoring
  • Building automation and energy management systems

What's in the Box

1 x Pro-Range PR19C-RS-020K Pressure Sensor (0-20 kPa, RS485, G1/4, 1 m cable).

Quick specs

Item Type
Pressure Sensor
Model No. / Name
PR19C RS 020K
Operating Voltage (VDC)
10 to 32
Working Pressure
0 to 20 kPa
Signal Output
RS485
Cable Length
1
See all specifications