
1 / 5 · Click to enlarge
AI Summary
The Pro-Range PR15C-PAS-050K is a 0-50 kPa digital pressure sensor with a 4-20 mA analog output and G1/4 thread. Its standard current-loop signal and 1 m cable make low-pressure monitoring easy to wire into control systems.
Key Highlights
- 0 to 50 kPa gauge pressure range for low-pressure monitoring
- 4-20 mA analog output for standard control system compatibility
- G1/4 threaded process connection for quick, secure installation
- 10 to 32 VDC operating voltage for flexible supply options
- 1 m cable included for straightforward electrical wiring
- Compact 30 mm diameter body with 269 g weight
Ideal For
- Industrial automation technicians monitoring pneumatic lines
- Control system integrators needing a 4-20 mA pressure input
- Maintenance teams servicing low-pressure equipment
- Machine builders specifying compact pressure sensors
- Process engineers working with air, gas or non-corrosive fluids
Buying Tip
Confirm your controller accepts a 4-20 mA input and that your port matches the G1/4 thread before ordering, since other thread options are not included with this model.
Elecvora expert review
Our verdict
A focused low-pressure sensor that pairs a 0-50 kPa range with a familiar 4-20 mA output, making it straightforward to integrate into industrial control setups. The G1/4 thread and included cable reduce installation effort.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 4-20 mA output suits most controllers
- Wide 10 to 32 VDC supply range
- G1/4 thread and 1 m cable simplify installation
- Compact 30 mm diameter body
Cons
- Limited to low-pressure applications up to 50 kPa
- Gauge pressure only, not absolute
- Non-corrosive media only
Best for
Low-pressure pneumatic and automation monitoring
Not ideal for
High-pressure or corrosive fluid systems
Specifications
| Operating Voltage (VDC) | 10 to 32 |
|---|---|
| Output Current (mA) | 4 to 20 |
| Working Pressure | 0 to 50 kA |
| Cable Length | 1 |
| Length (mm) | 173 |
| Diameter (mm) | 30⌀ |
| Weight (g) | 269 |
| Shipping Weight | 0.335 kg |
| Shipping Dimensions | 20 × 11 × 6 cm |
What's in the box
- 1 x Pro-Range PR15C-PAS-050K Digital Pressure Sensor, 0~50 kPa
Frequently Asked Questions
What pressure range does this sensor measure?
What output signal does it provide?
What supply voltage does it need?
What thread type does it use?
What media can it be used with?
What is included with the sensor?
Overview
The Pro-Range PR15C-PAS-050K is a digital pressure sensor designed for accurate low-pressure measurement in industrial settings. It reads gauge pressure from 0 to 50 kPa and converts it into a 4-20 mA analog output, a signal format widely accepted by controllers, PLCs and monitoring equipment. The G1/4 threaded connection allows direct mounting into pneumatic circuits, manifolds and process lines, and the included 1-metre cable keeps wiring simple.
Key Features
- 0 to 50 kPa gauge pressure range suited to low-pressure monitoring
- 4-20 mA analog output for standard signal compatibility
- G1/4 thread for fast and secure installation
- 10 to 32 VDC operating voltage range
- 1 m cable for convenient electrical connection
- Compact 30 mm diameter, 173 mm long body weighing 269 g
Specifications Explained
Pressure range and type
The 0 to 50 kPa span is intended for low-pressure work, such as pneumatic systems where larger-range sensors would lack resolution. It measures gauge pressure, meaning pressure relative to ambient, which is the usual reference for line and vessel monitoring.
Output signal
The 4-20 mA current loop output carries the pressure reading to a controller or display. Current-loop signalling is common in industrial environments because it is easy to run over cable and simple to read at the receiving end.
Electrical and mechanical
Operating voltage is 10 to 32 VDC, giving headroom for common industrial supplies. The G1/4 process connection and 1 m cable cover installation and wiring in one package, and the 30 mm diameter body fits into compact assemblies.
Compatibility and Requirements
The sensor requires a DC supply within 10 to 32 VDC and a receiving device that accepts a 4-20 mA analog input. The G1/4 thread must match the port on the pneumatic or process line. It is intended for air, gas or non-corrosive fluids.
Typical Uses
- Pneumatic system pressure monitoring
- Industrial automation and control loops
- Low-pressure process monitoring with non-corrosive media
- Equipment where a standard 4-20 mA signal is required
What's in the Box
1 x Pro-Range PR15C-PAS-050K Digital Pressure Sensor, 0~50 kPa.
Quick specs
- Operating Voltage (VDC)
- 10 to 32
- Output Current (mA)
- 4 to 20
- Working Pressure
- 0 to 50 kA
- Cable Length
- 1
- Length (mm)
- 173
- Diameter (mm)
- 30⌀


















