
1 / 3 · Click to enlarge
AI Summary
A 12V brushed DC motor with a 21.5:1 planetary gearbox, delivering 280 RPM and 79.7 gf.cm rated torque in a compact 32 mm body. The D-shaped 6 mm shaft and steel planetary stage make it an easy fit for robotics and automation drivetrains.
Key Highlights
- 21.5:1 planetary reduction gives 280 RPM from a 12V supply
- 79.7 gf.cm rated torque with 472 gf.cm stall torque
- Compact 32 mm body diameter and 85 mm total length
- 6 mm D-type shaft, 15.5 mm long, for secure coupling
- Low 140 mA no-load current; 700 mA or less under load
- Runs from -40 to 100 degrees Celsius for demanding setups
Ideal For
- Robotics builders needing geared drive at moderate speed
- Automation and access-control system designers
- Makers building treadmills, ball machines or test rigs
- Light-duty industrial machinery and prototyping teams
Buying Tip
Check that your motor driver and 12V supply can handle the 3.03 A stall current, and confirm the 6 mm D-shaft matches your pulley or coupling before ordering.
Elecvora expert review
Our verdict
A well-balanced 12V planetary geared motor that trades top speed for controllable torque in a compact package. The 21.5:1 ratio and 6 mm D-shaft make it easy to integrate into small robotics and automation builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 32 mm body with useful 79.7 gf.cm rated torque
- Low no-load draw of 140 mA or less
- D-type shaft gives a secure, slip-resistant coupling point
- Wide -40 to 100 degrees Celsius operating range
Cons
- Brushed motor means eventual brush wear over long service
- Stall current of 3.03 A requires a driver with adequate headroom
- No encoder or feedback included, so position control needs external sensing
Best for
Small robotics, automation and light-duty machinery builds needing geared 12V motion
Not ideal for
Applications requiring high speed, closed-loop position feedback or heavy continuous loads
Specifications
| Item Type | Planetary Gear Type |
|---|---|
| Model Series | PG32 Series |
| Voltage Rating | 12 |
| Rated Speed (RPM) | 280 |
| Gear Ratio | 21.5:1 |
| Current Rating (A) | ≤700mA (With Load); ≤140mA (No Load) |
| Rated Torque (gf.cm) | 79.7 |
| Power Rating | 4.6 |
| Stall Torque (gf.cm) | 472 |
| Stall current (A) | 3.03 |
| Motor Type | Planetary Brushed DC Motor |
| Operating Temperature (°C) | -40 to 100 |
| Total Length | 85 mm |
| Total Body Diameter (mm) | 32 |
| Shaft Diameter | 6 mm |
| Shaft Length (mm) | 15.5 |
| Shaft Type | D Type |
| Weight (g) | 194 |
| Shipping Weight | 0.215 kg |
| Shipping Dimensions | 9 × 4 × 4 cm |
What's in the box
- 1 x Pro-Range 280 RPM 12V Planetary Gear DC Motor PG32GR 21.5K
Frequently Asked Questions
What voltage does this motor require?
What speed and torque does it produce?
Can it run in both directions?
What shaft does it have?
What is included in the package?
How should I look after it?
Overview
The Pro-Range PG32GR 21.5K is a 12V brushed DC motor built around a planetary gearbox with a 21.5:1 reduction ratio. It turns a 12V input into a 280 RPM output while keeping the housing to a 32 mm diameter and 85 mm overall length. That combination of moderate speed and useful torque makes it a practical choice for builders who need controlled motion rather than raw RPM.
Because the planetary stage shares load across several gears, the drivetrain stays compact and runs smoothly. The output shaft is a 6 mm D-type, 15.5 mm long, which mates cleanly with pulleys, hubs and couplings that use a flat-spot grip.
Key Features
- 21.5:1 planetary reduction for a steady 280 RPM output at 12V
- 79.7 gf.cm rated torque, rising to 472 gf.cm at stall
- Efficient running with 140 mA or less at no load and 700 mA or less under load
- Compact 32 mm body with 85 mm total length for tight installations
- 6 mm D-type shaft, 15.5 mm long, for reliable coupling
- Wide operating range from -40 to 100 degrees Celsius
Specifications Explained
Speed and gearing
The 21.5:1 ratio is what converts the motor's fast internal rotation into a controllable 280 RPM at the shaft. That speed suits mechanisms that need to move at a measured pace rather than spin quickly.
Torque figures
Rated torque of 79.7 gf.cm describes continuous working load, while the 472 gf.cm stall figure is the peak the motor can hold before it stops turning. Design your mechanism around the rated value and treat stall torque as a limit, not a target.
Current draw
With no load the motor draws 140 mA or less; under load it stays at or below 700 mA, and stall current reaches 3.03 A. Size your power supply and driver with the stall current in mind so brief overloads do not cause problems.
Physical fit
A 32 mm body diameter and 85 mm total length keep the unit small, and the 194 g weight is light enough for moving assemblies. The 6 mm D-shaft with 15.5 mm length gives a defined flat for set screws.
Compatibility and Requirements
This motor needs a 12V DC supply and a suitable motor driver or electronic speed controller rated for its current demand, including the 3.03 A stall current. It rotates in both clockwise and counter-clockwise directions, so direction control depends on your driver. The gearbox uses a steel, powdered or POM gear set in a steel housing.
Typical Uses
- Robotics drivetrains and joint actuation
- Automation and intelligent access systems
- Test rigs, treadmills and ball machines
- Light-duty industrial machinery
- Helicopter, aircraft and turbine-related transmissions
What's in the Box
1 x Pro-Range 280 RPM 12V Planetary Gear DC Motor PG32GR 21.5K.
Quick specs
- Item Type
- Planetary Gear Type
- Model Series
- PG32 Series
- Voltage Rating
- 12
- Rated Speed (RPM)
- 280
- Gear Ratio
- 21.5:1
- Current Rating (A)
- ≤700mA (With Load); ≤140mA (No Load)



















