Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12V brushed DC motor with a two-stage 13.7:1 planetary gearbox, delivering 359 RPM and 34.5 N-cm of torque through an 8 mm D-shaft. It gives compact builds a smooth, reversible drive with useful low-end torque.

Key Highlights

  • 12V brushed DC motor with two-stage 13.7:1 planetary reduction
  • 359 RPM output speed from a 6000 RPM base motor
  • 34.5 N-cm rated torque in a 39 mm diameter metal housing
  • 8 mm D-type shaft, 20 mm long, for secure coupling
  • Rated at 2.06 A and 24.46 W for predictable power draw
  • Operates from -40 to 100 degrees Celsius at 20 to 85 percent RH

Ideal For

  • Robotics builders assembling wheeled or articulated platforms
  • Automation engineers driving fixtures and linear actuators
  • Makers building camera sliders and motion rigs
  • Students and labs needing a reversible geared motor for projects
  • Equipment designers replacing a compact 12V drive unit

Buying Tip

Check your supply and driver can deliver more than the 2.06 A rated current to cover startup draw, and confirm the 8 mm D-shaft suits your coupling before ordering.

Elecvora expert review

Our verdict

A well-balanced 12V geared motor for projects that need moderate speed with usable torque in a compact metal package. The 13.7:1 planetary reduction and 8 mm D-shaft make it straightforward to integrate into robotics and automation builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Useful 34.5 N-cm torque at a practical 359 RPM output
  • Two-stage planetary gearbox with low-backlash style torque transfer
  • Metal housing and 8 mm D-shaft for robust coupling
  • Wide -40 to 100 degrees Celsius operating range
  • Reversible and variable speed with a suitable driver

Cons

  • Brushed motor means periodic brush wear over long service
  • Encoder and mounting bracket are not included
  • Rated current of 2.06 A requires a supply with startup headroom

Best for

Robotics, actuators and automation fixtures needing a compact 12V geared drive

Not ideal for

Applications requiring encoder feedback or very high output speed out of the box

Specifications

Item TypePlanetary Gear Type
Model SeriesPG36M555 Series
Voltage Rating12
Rated Speed (RPM)359
Torque Rating (kg-cm)3.51
Gear Ratio13.7 : 1
Rated Current (A)2.06
Power Rating24.46
Base Motor Rated RPM6000
Rated Torque (N-cm)34.5
Operating Temperature (°C)-40 to 100
Opt. Relative Humidity(RH)20% to 85%
Gear MaterialPowder Metallurgy, Steel, POM
Housing MaterialMetal
Motor diameter (mm)39
Shaft Diameter8 mm
Motor Length (mm)90
Shaft Length (mm)20
Shaft TypeD Type
Weight (g)419
Gear Box Stages2 Stages
Shipping Weight0.475 kg
Shipping Dimensions14 × 5 × 5 cm

What's in the box

  • 1 x Pro-Range Planetary Gear DC Motor 12V 359 RPM 34.5 N-cm PG36M555-13.7K

Frequently Asked Questions

What voltage does this motor run on?
It is rated for 12V DC and draws 2.06 A at rated load, with a power rating of 24.46 W.
What speed and torque does the output shaft deliver?
The gearbox reduces the 6000 RPM base motor to 359 RPM and provides a rated torque of 34.5 N-cm (3.51 kg-cm).
Can the motor run in both directions?
Yes, it is a brushed permanent magnet DC motor, so reversing the supply polarity reverses rotation. Variable speed is possible with a suitable controller.
What shaft does it have?
The output shaft is 8 mm in diameter, 20 mm long and D-shaped for a secure fit in couplings and pulleys.
Is a mounting bracket or encoder included?
No. The package contains the motor only. A compatible EasyMech universal bracket and encoder-equipped PG36M555 variants are available separately.
How should I look after the motor?
Keep it within the -40 to 100 degrees Celsius and 20 to 85 percent relative humidity range, avoid stalling it under load, and keep the shaft free of excessive side force.

Overview

The Pro-Range PG36M555-13.7K is a geared DC motor built around a brushed permanent magnet motor and a two-stage planetary gearbox. The gearbox converts the base motor's 6000 RPM into a 359 RPM output while multiplying torque to 34.5 N-cm, a balance that suits mechanisms needing controlled motion rather than high speed. The 13.7:1 reduction is achieved with powder metallurgy, steel and POM gear components inside a metal housing.

With a 39 mm motor diameter, 90 mm body length and 419 g weight, the unit fits into compact assemblies while still offering a substantial torque figure. The 8 mm D-type shaft is 20 mm long and takes standard couplings, pulleys and pinions.

Key Features

  • Two-stage planetary gearbox with a 13.7:1 reduction ratio
  • 12V rated input with 2.06 A rated current and 24.46 W power rating
  • 359 RPM output speed and 34.5 N-cm rated torque
  • Metal housing with powder metallurgy, steel and POM gears
  • Reversible rotation and variable speed when driven by a suitable controller
  • 8 mm D-type shaft, 20 mm in length

Specifications Explained

Gear ratio and speed: The 13.7:1 ratio is the link between the 6000 RPM motor and the 359 RPM output. Lower ratios favour speed; this one keeps output moderate while adding torque.

Torque: 34.5 N-cm (3.51 kg-cm) is the rated figure at the output shaft. Plan loads around this value and avoid stalling the motor, which raises current and heat.

Electrical draw: At 12V the motor draws 2.06 A at rated load, so the supply and driver should be chosen with headroom for startup current.

Environment: The -40 to 100 degrees Celsius range and 20 to 85 percent relative humidity range cover most indoor and sheltered equipment enclosures.

Compatibility and Requirements

The motor requires a 12V DC supply and a driver or switch arrangement capable of reversing polarity if bidirectional operation is needed. The 8 mm D-shaft accepts couplings and pulleys sized for that diameter. A compatible EasyMech universal bracket for planetary DC geared motors (bend type) is offered separately, as are encoder-equipped versions of the PG36M555 series.

Typical Uses

Robotics platforms, linear actuators, automation fixtures, camera sliders, test rigs and other precision drive systems that need a compact geared motor with predictable speed and torque.

What's in the Box

One Pro-Range planetary gear DC motor, 12V, 359 RPM, 34.5 N-cm, PG36M555-13.7K.

Mounting Encoder on Motor

Quick specs

Item Type
Planetary Gear Type
Model Series
PG36M555 Series
Voltage Rating
12
Rated Speed (RPM)
359
Torque Rating (kg-cm)
3.51
Gear Ratio
13.7 : 1
See all specifications