Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12V planetary gear DC motor delivering 50 RPM and 392.4 N-cm of torque through a 99.5:1 gearbox. The built-in ME-775 7PPR encoder enables closed-loop speed and position control.

Key Highlights

  • 12V DC planetary gear motor with 99.5:1 reduction for slow, strong output
  • 50 RPM rated speed paired with 392.4 N-cm of torque
  • ME-775 7PPR encoder provides rotational feedback for closed-loop control
  • 10 mm keyed shaft, 25 mm long, for secure pulley and coupling fit
  • 985 g metal gearbox build suited to sustained motion duties
  • Part of the PGM45775 series with encoder and non-encoder variants

Ideal For

  • Robotics builders needing slow, high-torque joint or drive motion
  • Automation engineers designing indexing and positioning fixtures
  • Industrial motion projects requiring encoder feedback
  • Makers upgrading from open-loop geared motors to closed-loop control

Buying Tip

Confirm your driver and controller can supply 12V and read a 7PPR encoder signal before ordering, since the encoder is the reason to choose this version over the non-encoder model.

Elecvora expert review

Our verdict

A focused gearmotor for anyone who needs 50 RPM with real turning force and feedback in the same package. The encoder and keyed shaft make it a more complete motion solution than a plain geared DC motor.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 392.4 N-cm torque at a controlled 50 RPM
  • Encoder included for closed-loop speed and position work
  • Keyed 10 mm shaft resists slipping under load
  • Planetary gearbox in a proven PGM45775 series format

Cons

  • Requires a separate 12V supply and motor driver
  • Encoder wiring and loop tuning add setup effort
  • At 985 g it is not a lightweight option for small frames

Best for

Robotics and automation builds needing slow, strong, feedback-controlled rotation

Not ideal for

Projects wanting fast output speeds or minimal wiring complexity

Specifications

Item TypePlanetary Gear Type
Model SeriesPGM45775 Series
Voltage Rating12
Rated Speed (RPM)50
Torque Rating (kg-cm)40.01
Shaft Diameter10 mm
Shaft Length (mm)25
Shaft TypeKeyed Shaft
Weight (g)985
Shipping Weight0.9 kg
Shipping Dimensions20 × 6 × 7 cm

What's in the box

  • 1 x Pro-Range 392.4 N-cm 50 RPM 12V Planetary Gear DC Motor PGM45775-99.5K with encoder ME-775, 7PPR

Frequently Asked Questions

What voltage does this motor run on?
It is rated for 12V DC. Use a supply and driver suited to that voltage and to the motor's current draw.
What does the encoder do for my build?
The ME-775 7PPR encoder reports rotation to your controller, allowing closed-loop speed regulation and repeatable positioning instead of open-loop control.
What is the shaft like?
The output shaft is 10 mm in diameter and 25 mm long with a keyed profile, so pulleys and couplings engage on the keyway.
Is a driver or power supply included?
No. The package contains the motor with its fitted encoder only, so a 12V supply and suitable motor driver are needed separately.
How much torque can it deliver?
It is rated at 392.4 N-cm at 50 RPM. Loads should be sized with margin below that figure for reliable operation.
How should I look after it?
Keep the gearbox and encoder free of dust and moisture, check mounting bolts stay tight, and avoid stalling the motor for long periods.

Overview

The Pro-Range PGM45775-99.5K is a 12V planetary gear DC motor designed around one goal: turning slowly while pushing hard. A 99.5:1 planetary reduction brings the motor output to a rated 50 RPM, where it delivers 392.4 N-cm of torque. That combination makes it a practical choice for mechanisms that must lift, index, clamp or drive a load without racing ahead of the control system.

The motor ships with an ME-775 7PPR encoder already fitted. The encoder reports rotation back to your controller, which opens the door to closed-loop speed regulation and repeatable positioning instead of open-loop guessing. The output shaft is 10 mm in diameter and 25 mm long with a keyed profile, so pulleys, sprockets and couplings locate positively rather than relying on friction alone.

Key Features

  • High torque at low speed: 392.4 N-cm at 50 RPM from a 12V supply.
  • Planetary gearbox: 99.5:1 reduction in the PGM45775 series format.
  • Integrated feedback: ME-775 7PPR encoder for closed-loop control.
  • Keyed output shaft: 10 mm diameter, 25 mm length, secure against slip.
  • Substantial build: 985 g unit for sustained motion work.

Specifications Explained

Speed and torque

50 RPM means one output revolution roughly every 1.2 seconds, a pace suited to positioning tasks rather than continuous fast travel. The 392.4 N-cm torque figure describes the turning force available at that rated speed, which is why this motor appears in lifting and driving roles where smaller geared motors stall.

Gear ratio and voltage

The 99.5:1 reduction is the trade the motor makes: input speed is divided down heavily, and torque rises in proportion. The 12V rating defines the supply the motor is specified around, so plan your driver and power source for a 12V DC system.

Encoder and shaft

The ME-775 encoder provides 7 pulses per revolution, giving your controller a rotation signal for speed and position loops. The keyed 10 mm shaft transfers torque through a mechanical key rather than clamp friction alone, which matters at these torque levels.

Compatibility and Requirements

This motor requires a 12V DC supply and a motor driver capable of handling its current demand. To use the encoder, your controller needs an input that can read a 7PPR quadrature-style feedback signal from the ME-775. The 10 mm keyed shaft accepts pulleys, sprockets and couplings sized for that diameter and keyway. No other accessories are supplied.

Typical Uses

  • Robot drive and joint mechanisms needing slow, strong motion
  • Automation fixtures with indexing or positioning stages
  • Industrial machinery where feedback-based control is required
  • Project builds combining a gearmotor with a closed-loop controller

What's in the Box

1 x Pro-Range 392.4 N-cm 50 RPM 12V Planetary Gear DC Motor PGM45775-99.5K with encoder ME-775, 7PPR.

Quick specs

Item Type
Planetary Gear Type
Model Series
PGM45775 Series
Voltage Rating
12
Rated Speed (RPM)
50
Torque Rating (kg-cm)
40.01
Shaft Diameter
10 mm
See all specifications