
1 / 3 · Click to enlarge
AI Summary
A dedicated 4S Li-Ion charger that delivers 16.8V at up to 10A through an XT60 male connector. Its isolated aluminium body, fan cooling and full protection set make charging simple and repeatable.
Key Highlights
- 16.8V output at 10A for 4S Li-Ion packs
- XT60 male connector ready for common battery leads
- Fully isolated aluminium casing with 12V DC fan cooling
- Reverse battery, short circuit, overload, over-voltage and surge protection
- ECO SMART design keeps no-load power loss negligible
- Compact 150 x 85 mm body that is easy to carry
Ideal For
- Hobbyists charging 4S Li-Ion packs on the bench
- Owners of small two-wheeler electric vehicles with 4S Li-Ion batteries
- Workshops that want a fixed-voltage charger instead of a programmable one
- Makers building 4S Li-Ion battery projects
- Users replacing a failed single-purpose 4S charger
Buying Tip
Confirm your battery is a 4S Li-Ion pack with an XT60-compatible lead and is rated to accept a 10A charge current before connecting it.
Elecvora expert review
Our verdict
The EV200 is a focused tool that does one job cleanly: charging 4S Li-Ion packs at 16.8V and up to 10A. Its isolated aluminium body, fan cooling and full protection set make it a sensible pick for anyone who owns a fixed battery type and does not need a programmable charger.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fixed 16.8V output with tight +/-0.10V tolerance
- 10A current capability for faster charging of larger packs
- Protection against reverse battery, short circuit, overload, over-voltage and surge
- Isolated aluminium casing with active fan cooling
- Compact 150 x 85 mm body that is easy to carry
Cons
- Works only with 4S Li-Ion batteries
- XT60 male connector may not suit every battery lead
- No display or adjustable current setting
Best for
Owners of 4S Li-Ion packs who want a simple, protected fixed-voltage charger
Not ideal for
Users who need multi-chemistry charging or adjustable output settings
Specifications
| Output Voltage | 16.8+/-0.10V |
|---|---|
| Output Current (A) | 10 |
| Battery cell type | 4S |
| Model No. / Name | EV200 16.8V/10A |
| Ripple | <500mV |
| Length (mm) | 150 |
| Width (mm) | 85 |
| Color | Black |
| Input Voltage | 150 ~ 270 VAC |
| Frequency Range | 47 ~ 63Hz |
| Shipping Weight | 0.899 kg |
| Shipping Dimensions | 22 × 15 × 08 cm |
What's in the box
- 1 x Pro-Range Battery Charger 4S Li-Ion 16.8V 10A with XT60 Male
Frequently Asked Questions
What battery type does this charger support?
What connector does the charger have?
What input voltage does it accept?
How is the charger cooled?
Can it charge a deeply discharged battery?
What is included with the charger?
Overview
The Pro-Range EV200 is a single-purpose charger built around one job: charging 4S Li-Ion batteries at 16.8V with a current limit of 10A. There is no chemistry menu to navigate and no mode to select, which makes it a practical choice for owners of a fixed battery type who want repeatable results every time.
The output is held at 16.8V +/-0.10V with ripple below 500mV, and the charger is housed in a fully isolated aluminium casing. A 12V DC fan provides air cooling during longer charge sessions, and the compact 150 x 85 mm footprint keeps it easy to store or carry.
Key Features
- 10A output capability for faster turnaround on larger 4S packs.
- XT60 male connector fitted as standard for direct connection to matching battery leads.
- ECO SMART technology keeps no-load power draw negligible when the charger is idle.
- Deep discharge charging capability for packs that have been left unused.
- Protection suite covering reverse battery, short circuit, overload, over-voltage and surge.
- Surge tolerance rated for 300VAC input for 5 seconds.
Specifications Explained
Output voltage and current
16.8V is the full-charge voltage for a 4S Li-Ion pack, and the tight +/-0.10V tolerance means the end-of-charge point stays consistent. The 10A current limit sets the maximum charge rate, so check that your pack is rated to accept that current before connecting it.
Input range
The charger accepts 150 to 270 VAC at 47 to 63Hz, which covers typical mains supplies in the US, UK, EU, Australia, Brazil, Japan and India without a voltage selector switch.
Ripple and cooling
Ripple below 500mV keeps the output reasonably clean. The 12V DC fan handles heat removal, so leave clearance around the casing during use.
Build and size
The isolated aluminium body measures 150 mm long and 85 mm wide in black, and the unit ships at 0.899 kg in a 22 x 15 x 8 cm carton.
Compatibility and Requirements
This charger is intended for 4S Li-Ion batteries only. It is not a multi-chemistry charger and should not be used with other cell counts or battery types. The XT60 male output connector must match the battery lead you plan to use, so confirm your pack's connector before ordering. A 3-pin AC power cord is attached to the charger.
Typical Uses
Suited to bench charging of 4S Li-Ion packs, small two-wheeler and light electric vehicle batteries built on 4S Li-Ion, hobby projects, and workshop use where a fixed-voltage charger is more convenient than a programmable station.
What's in the Box
- 1 x Pro-Range Battery Charger 4S Li-Ion 16.8V 10A with XT60 Male
Quick specs
- Output Voltage
- 16.8+/-0.10V
- Output Current (A)
- 10
- Battery cell type
- 4S
- Model No. / Name
- EV200 16.8V/10A
- Ripple
- <500mV
- Length (mm)
- 150



















