
1 / 3 · Click to enlarge
AI Summary
A DIY biped robot kit built around an Arduino Nano and six servo motors. It walks, dances and avoids obstacles using an HC-SR04 sensor, with full assembly and code guidance included.
Key Highlights
- Six 180-degree servo motors drive walking, jumping and dance moves
- Arduino Nano microcontroller with a dedicated experimental shield
- HC-SR04 ultrasonic sensor triggers obstacle avoidance or a dance
- 5V buzzer gives audible feedback on actions and detection
- 3D-printed PLA body kit keeps assembly clear for beginners
- User manual covers assembly, wiring, code and circuit diagrams
Ideal For
- Students learning robotics and Arduino programming
- Hobbyists who enjoy hands-on DIY electronics builds
- Teachers running classroom or club robotics sessions
- Makers who want a walking robot platform to customise
- Beginners looking for a documented first robot project
Buying Tip
Read the user manual's wiring and power section before assembly, and test each servo's centre position before attaching the legs.
Elecvora expert review
Our verdict
A well-documented starter kit that covers the full path from printed parts to a moving, sensor-aware robot. The six-servo layout and Nano control give enough scope for real learning without overwhelming a beginner.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete parts set including controller, sensor and buzzer
- Clear manual with wiring, code and circuit diagrams
- Six servos allow walking, jumping and dance sequences
- Printed PLA body removes the need for 3D printing skills
Cons
- Power source for the robot is not listed in the package contents
- Requires assembly and code uploading, so patience is needed
- PLA body is light and best handled with care
Best for
Beginners and students building a first walking Arduino robot
Not ideal for
Buyers wanting a pre-assembled, ready-to-run robot
Specifications
| Item Type | DIY kit |
|---|---|
| Body Material | PLA Plastic |
| No. of Servos | 6 |
| Weight (g) | 475(Approx) |
| Shipping Weight | 0.472 kg |
| Shipping Dimensions | 26 × 17 × 8 cm |
What's in the box
- 1 x 3D printed robot body kit
- 1 x Arduino Nano with USB cable
- 6 x 180-degree servo motors
- 1 x HC-SR04 ultrasonic sensor
- 1 x Nano experimental shield
- 2 x female-to-female jumper wires (10 pcs)
- 1 x 5V buzzer
- 1 x user manual with assembly instructions, wiring, code and circuit diagrams
Frequently Asked Questions
Do I need to know programming before building this kit?
What does the ultrasonic sensor do on this robot?
Is a battery or power supply included?
How many servos does the robot use?
Where do I find the code and circuit diagram?
How should I care for the robot?
Overview
The Pro-Range Biped Dancing Robot is a complete DIY kit for building a small two-legged robot around an Arduino Nano. The body is 3D printed in PLA plastic, and six 180-degree servo motors provide the movement that lets the robot walk, jump and dance. An HC-SR04 ultrasonic sensor lets it sense obstacles ahead, so it can change direction or respond with a dance move instead of bumping into things. A 5V buzzer adds sound feedback for actions such as obstacle detection or finishing a dance sequence.
Everything needed for the build is in the box, including the Nano experimental shield and female-to-female jumper wires, and the user manual walks through assembly, wiring, code and circuit diagrams. The finished robot weighs around 475 g.
Key Features
- Autonomous movement: six servos coordinate walking, jumping and dancing.
- Arduino Nano control: a compact board handles motors, sensor input and movement logic.
- Obstacle avoidance: the HC-SR04 sensor detects objects and prompts a change of path or a dance move.
- Audible feedback: the 5V buzzer signals detection and completed actions.
- Beginner-friendly assembly: printed body parts, labelled wiring guidance and documented code.
Specifications Explained
The six 180-degree servos are the robot's muscles, and their range is what makes the walking and dance sequences possible. The Arduino Nano is the controller that reads the sensor and tells each servo what to do. The HC-SR04 ultrasonic sensor measures distance to objects in front of the robot, which is how obstacle avoidance works. PLA plastic gives the body a light, rigid structure, and the kit weighs roughly 475 g assembled. Shipping weight is about 0.472 kg in a 26 x 17 x 8 cm package.
Compatibility and Requirements
The kit is built around the Arduino Nano supplied in the box, together with the included Nano experimental shield, so no separate controller board is needed. Assembly and programming guidance, including the circuit diagram and code, are provided in the user manual and the linked drive folder. A power source for the robot is not listed among the included items, so check the manual's requirements before the first run.
Typical Uses
Use the kit to learn how servos, sensors and code work together, to run a classroom or club robotics session, or as a weekend project that ends with a robot that walks and dances. It also works as a starting point for experimenting with your own movement sequences.
What's in the Box
- 1 x 3D printed robot body kit
- 1 x Arduino Nano with USB cable
- 6 x 180-degree servo motors
- 1 x HC-SR04 ultrasonic sensor
- 1 x Nano experimental shield
- 2 x female-to-female jumper wire packs (10 pcs)
- 1 x 5V buzzer
- 1 x user manual with assembly, wiring, code and circuit diagrams
Quick specs
- Item Type
- DIY kit
- Body Material
- PLA Plastic
- No. of Servos
- 6
- Weight (g)
- 475(Approx)
- Shipping Weight
- 0.472 kg
- Shipping Dimensions
- 26 × 17 × 8 cm
Frequently Bought Together

Pro-Range Bluetooth CAR Control Using Arduino UNO
$23.99
Pro-Range Home Automation using an Arduino Uno
$19.99
Pro-Range IOT based Home Automation Using ESP8266 With Web & WhatsApp
$19.99
Pro-Range Line Follower Robot using Arduino UNO
$20.99
Pro-Range Obstacle Avoiding Robot using Arduino UNO Kit
$23.99
Pro-Range Smart Irrigation Using Thinkspeak Kit
$19.99

















