Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 100KV clockwise brushless motor for industrial and heavy-lift drones, rated to 11,600 W and 1400 g thrust on 6S to 12S LiPO. Its 28-pole, 8 mm-shaft design supports large propellers with efficient, stable output.

Key Highlights

  • 100KV winding for controlled torque on large propellers
  • Runs on 6S to 12S LiPO packs for flexible build voltage
  • 11,600 W maximum power and 1400 g maximum thrust
  • 28-pole brushless architecture for smooth, stable rotation
  • 8 mm shaft and 89.8 mm outer diameter for heavy-lift frames
  • 570 g motor weight keeps output-to-weight practical

Ideal For

  • Professional UAV integrators building heavy-lift multirotors
  • Aerial photography platforms using large propellers
  • Industrial inspection and survey drone projects
  • Long-endurance airframes running 6S to 12S LiPO
  • Builders specifying CW rotation motors in a mixed set

Buying Tip

Order this CW motor only alongside matching counter-rotating units, and confirm your ESC is rated for the 12S maximum and the 28 A efficiency current before committing to a build.

Elecvora expert review

Our verdict

The D8120 is a purposeful low-KV outrunner for large airframes, with the pole count, shaft size and power ceiling that industrial builds expect. It rewards careful system matching rather than plug-and-play use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 100KV winding suits large propellers and torque-heavy lift
  • Broad 6S to 12S LiPO compatibility
  • Substantial 11,600 W power and 1400 g thrust ceiling
  • 28-pole design for smooth commutation
  • Reasonable 570 g weight for its output class

Cons

  • CW rotation only, so a mixed set is required
  • No propeller, ESC or battery included
  • High current demands mean careful ESC and wiring selection

Best for

Heavy-lift and industrial UAV propulsion builds

Not ideal for

Small freestyle quads or beginners wanting plug-and-play parts

Specifications

Rotation angleCW
Motor KV (RPM/V)100 KV
Motor TypeBrushless Motor
Model No. / NameD8120
Compatible LiPO Batteries6S to 12S
FrameworkIndustrial Drone
Shaft Diameter8 mm
Max. Efficiency Current (A)28
Max. Power (W)11,600
Maximum Thrust (gm)1400
No-load current (A)4
No-Load Current (mA)4000
No of poles28
Operating Temperature (°C)-20 to 80
Outer Diameter (mm)89.8
Weight (g)570
Shipping Weight0.651 kg
Shipping Dimensions11 × 10 × 10 cm

What's in the box

  • 1 x Pro-Range D8120 100KV CW Brushless Drone Motor
  • 1 x Screw set

Frequently Asked Questions

What does 100KV mean on this motor?
It is the speed constant: the motor targets about 100 RPM per volt under no load. In practice it is a low-KV motor intended for large propellers and torque rather than high spin speed.
Which batteries can I use with the D8120?
The motor is compatible with 6S to 12S LiPO packs. Choose the voltage based on your propeller size, target thrust and ESC rating.
Is this motor clockwise or counter-clockwise?
This version is CW (clockwise). A multirotor needs both rotations, so pair it with counter-rotating motors for balanced control.
How much thrust can one motor produce?
The maximum thrust figure is 1400 g per motor. Use that value when calculating total lift for your frame and payload.
What is included with the motor?
You receive one Pro-Range D8120 100KV CW brushless motor and a screw set. Propellers, ESC and battery are not included.
How should I look after this motor?
Keep it within the -20 to 80 °C operating range, check the 8 mm shaft and mounts for wear, and keep the motor clean of dust and debris between flights.

Overview

The Pro-Range D8120 is a brushless outrunner motor intended for industrial drone platforms and other large-scale UAVs. It is the clockwise (CW) version, wound to 100KV, which means it turns relatively slowly per volt and delivers torque rather than raw RPM. That characteristic suits airframes swinging large propellers, where controllability and efficiency matter more than spin speed.

With a 28-pole configuration, an 8 mm shaft and an 89.8 mm outer diameter, the motor is sized for substantial propeller loads. It accepts 6S to 12S LiPO batteries, so the same motor can serve in moderate-voltage endurance builds or higher-voltage heavy-lift setups, depending on the rest of the power system.

Key Features

  • 100KV brushless winding for torque-rich rotation on large propellers
  • 6S to 12S LiPO compatibility to match different airframe power budgets
  • 11,600 W maximum power for demanding lift and payload tasks
  • 1400 g maximum thrust per motor for heavy-lift configurations
  • 28 poles for smooth commutation and stable running
  • 8 mm shaft to handle high propeller loads
  • 570 g weight balancing output against added mass

Specifications Explained

100KV describes the motor's speed constant: for every volt applied, it targets roughly 100 RPM under no load. Lower KV values generally pair with larger propellers and higher-voltage packs, which is exactly the role this motor fills.

Maximum power of 11,600 W and maximum efficiency current of 28 A indicate the working envelope. The no-load current of 4 A (4000 mA) tells you the baseline draw before the propeller is fitted, which is useful when estimating idle losses in a multirotor stack.

1400 g maximum thrust is the pull figure to use when calculating thrust-to-weight for your frame. Multiply by the number of motors, then compare against all-up weight with a sensible margin.

28 poles affect electronic speed controller timing and commutation smoothness; confirm your ESC supports the pole count and voltage you plan to use. The 8 mm shaft and 89.8 mm outer diameter define propeller adapter and frame clearance requirements.

The motor is rated for operating temperatures of -20 to 80 °C, so it is intended for use within that range rather than extreme environments.

Compatibility and Requirements

This motor is designed for 6S to 12S LiPO battery systems. It is a CW rotation unit, so it must be matched with counter-rotating motors in a multirotor layout to produce balanced yaw. You will need a compatible brushless ESC rated for your chosen voltage and current, plus a propeller suited to a 100KV, 28-pole motor with an 8 mm shaft. The industrial drone framework category indicates it belongs on large airframes rather than small craft.

Typical Uses

Industrial inspection platforms, heavy-lift multirotors, aerial photography rigs and large-scale UAV projects are the natural applications. Builders working on long-endurance or payload-carrying designs will find the low KV and high pole count a good fit for large-propeller propulsion.

What's in the Box

  • 1 x Pro-Range D8120 100KV CW Brushless Drone Motor
  • 1 x Screw set

Quick specs

Rotation angle
CW
Motor KV (RPM/V)
100 KV
Motor Type
Brushless Motor
Model No. / Name
D8120
Compatible LiPO Batteries
6S to 12S
Framework
Industrial Drone
See all specifications