
1 / 3 · Click to enlarge
AI Summary
A 12V planetary gear DC motor delivering 262 RPM and 45 N-cm through a 19.2:1 gearbox, with an integrated ME-37 7 PPR encoder for speed and position feedback. Its compact 39 mm metal body and 8 mm D-shaft make it easy to mount in robotics and automation builds.
Key Highlights
- 12V brushed DC motor with 19.2:1 two-stage planetary gearbox
- 262 RPM output speed with 45 N-cm rated torque
- Integrated ME-37 encoder at 7 PPR for feedback control
- 8 mm D-type shaft, 20 mm long, in a 39 mm metal housing
- Rated current 1.95 A with 22.93 W power rating
- Operates from -40 to 100 °C at 20-85% relative humidity
Ideal For
- Robotics builders needing encoder feedback for closed-loop control
- Automation engineers designing conveyor and actuator drives
- Makers building precision positioning mechanisms
- Students and educators working on motor control projects
- Machine designers replacing medium-load gearmotors
Buying Tip
Confirm your driver and power supply can deliver at least 1.95 A at 12V, and check that your controller can read a 7 PPR encoder signal before ordering.
Elecvora expert review
Our verdict
A well-rounded 12V gearmotor that pairs useful mid-range torque with built-in encoder feedback, making closed-loop control simpler than adding a separate sensor. It suits medium-load robotics and automation work where 262 RPM and 45 N-cm are a good fit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Encoder integrated, so no separate sensor mounting
- Compact 39 mm metal housing with 8 mm D-shaft
- Two-stage planetary gearbox for smooth torque transfer
- Wide -40 to 100 °C operating range
Cons
- Brushed carbon motor requires brush maintenance over time
- Package contents are not specified, so accessories must be confirmed
- Encoder resolution of 7 PPR is modest for very fine positioning
Best for
Robotics and automation builds needing 12V drive with feedback
Not ideal for
Applications requiring very high encoder resolution or brushless operation
Specifications
| Item Type | DC Gear Motor with Encoder |
|---|---|
| Model Series | PG36M555-19.2K |
| Voltage Rating | 12 |
| Rated Speed (RPM) | 262 |
| Torque Rating (kg-cm) | 4.59 |
| Gear Ratio | 19.2 : 1 |
| Motor Type | DC Carbon Brush Motor |
| Rated Current (A) | 1.95 |
| Power Rating | 22.93 |
| Base Motor Rated RPM | 6000 |
| Rated Torque (N-cm) | 45 |
| Operating Temperature (°C) | -40 to 100 |
| Opt. Relative Humidity(RH) | 20% to 85% |
| Gear Material | Powder Metallurgy, Steel, POM |
| Encoder Type | ME-37 |
| Resolution | 7 PPR(Encoder) |
| Housing Material | Metal |
| Motor diameter (mm) | 39 |
| Motor Length (mm) | 90 |
| Shaft Diameter | 8 mm |
| Shaft Length (mm) | 20 |
| Shaft Type | D Type |
| Weight (g) | 419 |
| Gear Box Stages | 2 Stages |
| Shipping Weight | 0.475 kg |
| Shipping Dimensions | 14 × 5 × 5 cm |
Frequently Asked Questions
What voltage does this motor run on?
What speed and torque does it deliver?
What is the encoder resolution?
What shaft does it have?
Does it come with a mounting bracket?
What are the operating conditions?
Overview
The Pro-Range PG36M555-19.2K combines a 12V carbon brush DC motor with a two-stage planetary gearbox and an ME-37 encoder in one compact unit. The 19.2:1 reduction turns the motor's 6000 RPM base speed into a 262 RPM output at the 8 mm D-type shaft, with a rated torque of 45 N-cm. Because the encoder is built in, you can monitor rotation and build closed-loop speed or position control without adding a separate sensor.
Key Features
- Planetary reduction: 19.2:1 ratio across two stages for smooth torque transfer in a short housing.
- Encoder feedback: ME-37 encoder with 7 PPR resolution for counting shaft rotation.
- Metal construction: 39 mm diameter, 90 mm long metal housing with powder metallurgy, steel and POM gears.
- Practical shaft: 8 mm D-type shaft, 20 mm long, for pulleys, couplings and hubs.
- Wide temperature range: rated from -40 to 100 °C at 20% to 85% relative humidity.
Specifications Explained
Speed and torque: 262 RPM is a moderate output speed suited to wheeled robots, conveyors and positioning stages. The 45 N-cm rating is the continuous load the motor is designed to handle; plan your mechanism so normal running loads stay at or below this figure.
Electrical draw: At 12V the motor draws a rated 1.95 A, or about 22.93 W. Choose a supply and driver that can comfortably deliver this current, and allow headroom for startup surges.
Encoder: The ME-37 encoder gives 7 pulses per revolution. Combined with the 19.2:1 gearbox, that yields fine resolution at the output shaft for measuring position or regulating speed in a control loop.
Build: The 419 g motor uses a metal housing and a mix of powder metallurgy, steel and POM gearing, balancing strength with low friction. Its 39 mm diameter and 90 mm length fit tight chassis layouts.
Compatibility and Requirements
The motor runs on a 12V DC supply and needs a suitable motor driver for direction and speed control. The encoder requires a controller or counter that can read its 7 PPR signal. The 8 mm D-type shaft accepts standard couplings and pulleys sized for that diameter. An EasyMech universal bracket for planetary DC geared motors (bend type) is available separately for mounting.
Typical Uses
- Robot drive wheels and steering mechanisms
- Automation equipment and conveyor drives
- Industrial actuators and linear motion assemblies
- Precision drive mechanisms needing speed feedback
- Educational and prototype robotics platforms
What's in the Box
Package contents are not specified for this listing. Check the product data before ordering if you need to confirm included accessories.

Quick specs
- Item Type
- DC Gear Motor with Encoder
- Model Series
- PG36M555-19.2K
- Voltage Rating
- 12
- Rated Speed (RPM)
- 262
- Torque Rating (kg-cm)
- 4.59
- Gear Ratio
- 19.2 : 1





















