Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Solid pultruded carbon fibre rods, 0.8mm diameter and 1000mm long, supplied as a pack of four. They offer high stiffness and low weight for RC models, kites and lightweight structural reinforcement.

Key Highlights

  • Solid pultruded carbon fibre construction with approx. 65% fibre volume
  • High Young's modulus of 230 GPa for excellent stiffness
  • Very low coefficient of expansion for dimensional stability
  • Ultra-light at 0.72 g per metre
  • Each rod is 0.8mm diameter and 1000mm long
  • Pack of four rods, ready for multiple projects

Ideal For

  • RC model aircraft builders needing lightweight pushrods
  • Kite makers looking for stiff spars
  • Drone frame designers requiring thin reinforcement rods
  • Hobbyists and model makers working on small structures

Buying Tip

Consider the 0.8mm diameter for applications where minimal weight and high stiffness are critical, and ensure you have suitable cutting tools for carbon fibre.

Elecvora expert review

Our verdict

These solid pultruded carbon fibre rods offer an excellent balance of stiffness and low weight for small-scale projects. The pack of four provides good value for hobbyists and makers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High stiffness from 230 GPa modulus
  • Very low weight per metre
  • Consistent diameter and length
  • Low thermal expansion
  • Pack of four adds convenience

Cons

  • Solid rods may be too stiff for applications needing flexibility
  • Requires careful cutting to avoid splintering
  • Not suitable for high-impact applications without protection

Best for

RC models, kites and lightweight structural reinforcement

Not ideal for

Applications requiring flexible or bendable rods

Specifications

Fiber VolumeApprox. 65%
Fiber Density1.4 - 1.8 g/cm3
Glass Transition Temperature150°C~190°C
Expansion Coefficientsmall
Weight per meter0.72 g per meter
Resin glass transition (Tg)170º C
Youngs Modulus230 GPa
Dimensions (L x W x H) mm0.8mm * 1000mm
Shipping Weight0.2 kg
Shipping Dimensions105 × 2 × 1 cm

What's in the box

  • 4 x Pultruded Solid Carbon Fibre Rod 0.8mm x 1000mm

Frequently Asked Questions

Can these rods be cut to shorter lengths?
Yes, they can be cut with a fine-toothed saw or rotary tool. Use appropriate safety gear to avoid inhaling carbon dust.
Are these rods hollow or solid?
They are solid carbon fibre rods, not hollow tubes.
What is the maximum temperature these rods can withstand?
The resin glass transition temperature is 170°C, and the glass transition range is 150°C to 190°C. Avoid prolonged exposure above these temperatures.
How many rods are included?
The pack contains four rods, each 0.8mm in diameter and 1000mm long.
Can these rods be used outdoors?
They are suitable for outdoor use in moderate conditions, but prolonged UV exposure may affect the resin over time. Consider protective coatings for extended outdoor applications.
What is the weight of each rod?
Each rod weighs approximately 0.72 grams per metre, so a 1000mm rod weighs about 0.72 grams.

Overview

These solid pultruded carbon fibre rods are designed for applications where low weight and high stiffness are essential. Each rod has a 0.8mm diameter and a 1000mm length, and they are supplied as a pack of four. The pultrusion process pulls continuous carbon fibres through a resin bath and a forming die before curing, resulting in a consistent, longitudinally reinforced profile. With a fibre volume of approximately 65% and a Young's modulus of 230 GPa, these rods resist bending and maintain their shape under load. At only 0.72 grams per metre, they add negligible mass to your build.

Key Features

  • Solid carbon fibre rod with unidirectional fibre reinforcement
  • High stiffness from 230 GPa Young's modulus
  • Very low thermal expansion for stable performance
  • Lightweight: 0.72 g per metre
  • Consistent 0.8mm diameter and 1000mm length
  • Pack of four for convenience and multiple uses

Specifications Explained

Fibre volume (approx. 65%): A high proportion of carbon fibre relative to resin contributes to the rod's strength and stiffness while keeping weight down.

Young's modulus (230 GPa): This measures the rod's resistance to elastic deformation. A higher value means the rod is stiffer and less likely to bend under load, which is important for precision structures.

Expansion coefficient (small): The rods change length very little with temperature changes, helping maintain alignment in applications exposed to varying conditions.

Glass transition temperature (150°C–190°C): The resin matrix retains its properties up to this range, so the rods can be used in moderately warm environments without softening.

Weight per metre (0.72 g): Extremely light, making these rods suitable for weight-sensitive projects.

Compatibility and Requirements

These rods are solid and do not require any additional components for basic use. They can be cut to length with appropriate tools and bonded with common adhesives. No specific compatibility information is provided; users should verify suitability for their particular application.

Typical Uses

Common applications include RC model aircraft and drones, kites, lightweight frame reinforcement, pushrods, and small structural components in hobby and engineering projects. The rods are also used in model making and DIY projects where a stiff, lightweight rod is needed.

What's in the Box

Four solid pultruded carbon fibre rods, each 0.8mm diameter and 1000mm long.

Quick specs

Fiber Volume
Approx. 65%
Fiber Density
1.4 - 1.8 g/cm3
Glass Transition Temperature
150°C~190°C
Expansion Coefficient
small
Weight per meter
0.72 g per meter
Resin glass transition (Tg)
170º C
See all specifications