Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This compact module converts PWM duty cycle (0-100%) into a 0-10V analog signal, powered from 12-30 VDC. Jumper-selectable 5V or 24V input levels make it easy to interface with both microcontrollers and PLCs.

Key Highlights

  • Converts 0-100% PWM duty cycle to 0-10V analog output
  • Wide 12-30 VDC operating voltage for industrial and hobby use
  • Jumper selects 5V or 24V PWM input level
  • Onboard potentiometer for output fine-tuning
  • Compact 33 x 33 mm board weighs only 20 g
  • Screw terminal connections for easy wiring

Ideal For

  • Automation technicians interfacing PLCs with analog devices
  • Electronics hobbyists and makers using 5V microcontrollers
  • Industrial panel builders needing compact signal conversion
  • Students learning about PWM and analog signals
  • Maintenance engineers retrofitting analog control systems

Buying Tip

Confirm your PWM source's peak voltage and set the jumper accordingly before powering the module.

Elecvora expert review

Our verdict

A practical, no-frills converter that does one job well: turning PWM into 0-10V. Its jumper-selectable input levels and small size make it adaptable to both hobby and industrial contexts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 12-30 VDC input range
  • Selectable 5V or 24V PWM input
  • Compact and lightweight
  • Onboard fine-tuning potentiometer

Cons

  • Requires a separate power supply
  • No enclosure or mounting holes provided
  • Limited documentation on pin functions

Best for

Makers and technicians needing a simple PWM-to-analog interface

Not ideal for

Applications requiring isolated or high-current outputs

Specifications

Item TypeSignal Generator
Operating Voltage (VDC)12 to 30
Length (mm)33
Width (mm)33
Weight (g)20
Shipping Weight0.025 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 x PWM to Voltage 0-100% to 0-10V Converter Module

Frequently Asked Questions

What does this module do?
It converts a PWM digital signal (0-100% duty cycle) into a proportional 0-10V analog voltage.
What power supply does it need?
The module requires a DC supply between 12 and 30 volts, connected to the VCC and GND terminals.
How do I choose between 5V and 24V input?
Use the jumper: set it to 5V for 5V microcontrollers and controllers with 4.5-10V peak levels, or to 24V for PLCs and 12-24V peak sources.
Is the output adjustable?
Yes, a potentiometer on the board allows fine-tuning of the output voltage for calibration.
What is included in the package?
The package contains one PWM to Voltage Converter Module only. No cables or power supply are included.
Can I use it with a 3.3V microcontroller?
The specified input levels are 4.5-10V (5V setting) and 12-24V (24V setting). A 3.3V signal is not directly supported according to the given specifications.

Overview

The Generic PWM to Voltage Converter Module is a compact signal-conditioning board that turns a PWM digital signal into a proportional 0-10V analog voltage. It is designed for anyone who needs to connect a microcontroller, PLC, or other PWM source to an analog-input device such as a dimmer, motor driver, or valve controller. The module operates from a 12 to 30 VDC supply and accepts PWM duty cycles from 0% to 100%, producing an output that scales accordingly.

Measuring only 33 mm square and weighing 20 g, the board is easy to embed in control panels, project boxes, and prototype setups. A jumper lets you match the PWM input level to your source: use the 5V position for 5V MCUs and common controllers, or the 24V position for standard PLC outputs. An onboard potentiometer provides fine adjustment of the output voltage.

Key Features

  • Converts PWM duty cycle (0-100%) to 0-10V analog output
  • Wide 12-30 VDC operating voltage
  • Jumper-selectable 5V or 24V PWM input level
  • Potentiometer for fine-tuning the output
  • Compact 33 x 33 mm board, 20 g weight
  • Screw terminals for secure wiring

Specifications Explained

Operating voltage (12-30 VDC): The module requires a DC supply in this range, separate from the PWM signal source. This makes it suitable for both 12V and 24V industrial systems.

PWM input level: The jumper selects the expected peak voltage of the PWM signal. The 5V setting suits 5V microcontrollers and controllers with 4.5-10V peak levels. The 24V setting suits PLCs and sources with 12-24V peak levels. Match the jumper to your source to ensure reliable conversion.

Output: The VOUT terminal provides a 0-10V analog voltage that corresponds to the PWM duty cycle. At 0% duty, the output is near 0V; at 100% duty, it approaches 10V. The potentiometer allows slight calibration.

Dimensions and weight: At 33 x 33 mm and 20 g, the module fits into tight spaces and adds negligible weight to portable setups.

Compatibility and Requirements

This module works with PWM sources that match the selected input level: 5V MCUs and controllers (jumper on 5V) or PLCs and 24V systems (jumper on 24V). It requires a separate 12-30 VDC power supply. The output is a 0-10V analog signal suitable for devices that accept that range. No other compatibility details are specified.

Typical Uses

  • Interfacing a microcontroller PWM output with an analog dimmer
  • Converting PLC PWM signals to 0-10V for valve or actuator control
  • Calibrating analog-input motor drivers in automation projects
  • Educational demonstrations of signal conversion
  • Prototyping control systems in panel enclosures

What's in the Box

1 x PWM to Voltage 0-100% to 0-10V Converter Module. No other accessories are included.

Quick specs

Item Type
Signal Generator
Operating Voltage (VDC)
12 to 30
Length (mm)
33
Width (mm)
33
Weight (g)
20
Shipping Weight
0.025 kg
See all specifications