
1 / 4 · Click to enlarge
AI Summary
A double-sided 30x30mm PCB adapter that converts QFN56 or QFN64 surface-mount chips to a DIP-style layout with 0.5mm pitch. It lets you solder fine-pitch QFN parts and use them in sockets or breadboard-friendly builds.
Key Highlights
- Dual QFN56 and QFN64 footprints on one board
- Double-sided through-line PCB construction
- Compact 30 x 30 mm outline
- 0.5 mm pad pitch for fine-pitch QFN packages
- Non-stick solder mask aids hand soldering
- Weighs only 3 g for easy handling
Ideal For
- Electronics hobbyists prototyping with QFN56 or QFN64 chips
- Repair technicians testing fine-pitch QFN components
- Hardware developers evaluating QFN parts before custom PCB layout
- Students learning fine-pitch SMD soldering
- Makers adapting QFN sensors or drivers to breadboard setups
Buying Tip
Check that your QFN chip has a 0.5 mm pitch and a 56 or 64 pin count before ordering, and plan for a fine-tip soldering iron and flux.
Elecvora expert review
Our verdict
A practical, low-cost adapter for anyone who needs to work with QFN56 or QFN64 chips without designing a custom board. It is a bare PCB, so success depends on your fine-pitch soldering skills and on adding your own socket or headers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports two QFN package sizes on one board
- 0.5 mm pitch matches common fine-pitch QFN parts
- Compact 30x30mm size fits tight spaces
- Non-stick solder mask helps reduce bridging
Cons
- Requires hand soldering of fine-pitch QFN
- No socket or headers included
- No documented voltage or current ratings (passive board)
Best for
Hobbyists and technicians comfortable with SMD soldering who need to test QFN56 or QFN64 chips in a DIP-friendly setup.
Not ideal for
Beginners without fine-pitch soldering experience or anyone expecting a plug-and-play module.
Specifications
| Adapter Type | DIP, QFN |
|---|---|
| Model No. / Name | QFN 56/64 Pin |
| Length (mm) | 30mm |
| Width (mm) | 30mm |
| Weight (g) | 3 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x QFN56/64 SMD to DIP PCB Adapter
Frequently Asked Questions
What QFN packages does this adapter support?
Does it come with a DIP socket or pin headers?
What soldering tools do I need?
Can I use it in a breadboard?
Does the adapter have any voltage or current rating?
How should I clean the board after soldering?
Overview
The QFN56/QFN64 SMD to DIP PCB Adapter is a small double-sided circuit board designed to bridge two package styles: fine-pitch QFN surface-mount chips and through-hole DIP layouts. Measuring 30 x 30 mm and weighing about 3 g, it provides a square QFN56 footprint on one side and a square QFN64 footprint on the other. This lets you work with either package on the same adapter, which is useful when you need to test or prototype with QFN parts that would otherwise require a custom PCB.
The board uses through-line plating and a non-stick solder mask, both of which help when hand-soldering fine-pitch components. The 0.5 mm pitch matches the lead spacing of many QFN56 and QFN64 devices, so the pads align with the component terminals. The adapter is a bare PCB only; it does not include a socket, headers, or the QFN chip itself.
Key Features
- Dual footprint: One side for QFN56, the other for QFN64, giving two adapters in one board.
- DIP-friendly layout: Through-line construction lets you route the QFN pads to a DIP-style arrangement for sockets or breadboards.
- 0.5 mm pitch: Suited to fine-pitch QFN packages with 0.5 mm lead spacing.
- Compact size: 30 x 30 mm keeps the adapter small enough for tight prototype setups.
- Solder mask: Non-stick mask reduces solder bridging between fine-pitch pads during hand assembly.
Specifications Explained
Adapter type: DIP and QFN. The board converts a QFN surface-mount package to a DIP-compatible pin arrangement, so you can use QFN chips in through-hole sockets or perfboard projects.
Model: QFN56/64 pin. This indicates the adapter supports 56-pin and 64-pin QFN packages, one per side.
Dimensions: 30 mm length and 30 mm width. The square outline matches the square QFN footprints and leaves room for routing.
Pitch: 0.5 mm. The pad spacing is designed for QFN components with 0.5 mm lead pitch, a common fine-pitch standard.
Weight: 3 g. The low weight means it will not strain small cables or connectors.
Compatibility and Requirements
The adapter is intended for QFN56 and QFN64 packages with 0.5 mm pitch. It does not include a DIP socket, pin headers, or any active components. You will need a soldering iron with a fine tip, flux, and solder to attach the QFN chip. To use the adapter in a socket or breadboard, you must also supply a DIP socket or headers and solder them to the board. The adapter is a passive PCB and has no voltage or current ratings of its own; those depend on the QFN component you install and the surrounding circuit.
Typical Uses
- Prototyping with QFN56 or QFN64 sensors, drivers, or controllers before committing to a custom PCB.
- Repair or replacement work where a QFN chip needs to be tested in a socketed environment.
- Educational projects that involve fine-pitch soldering practice.
- Breadboard-friendly evaluation of QFN parts when combined with a DIP socket or headers.
What's in the Box
One QFN56/64 SMD to DIP PCB adapter board. No other items are included.
Quick specs
- Adapter Type
- DIP, QFN
- Model No. / Name
- QFN 56/64 Pin
- Length (mm)
- 30mm
- Width (mm)
- 30mm
- Weight (g)
- 3
- Shipping Weight
- 0.001 kg













