Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This double-sided PCB adapter converts a 0.5mm pitch QFN24 package to a standard DIP-24 footprint for easy prototyping. The B side also supports 0.65mm pitch QFN24, giving you flexibility for different chip variants.

Key Highlights

  • Converts QFN24 to DIP-24 for breadboard and through-hole use
  • 0.5mm pitch on A side, 0.65mm pitch on B side
  • Double-sided PCB with 24 pins per side
  • Compact 31 x 13.5mm board weighs only 3 grams
  • Ideal for prototyping, repair, and testing QFN components

Ideal For

  • Electronics hobbyists prototyping with QFN24 chips
  • Repair technicians replacing QFN24 components
  • Engineering students learning SMD soldering
  • Makers integrating QFN sensors into breadboard projects

Buying Tip

Verify your QFN package pitch (0.5mm or 0.65mm) and pin count (24) before ordering, as this adapter is specific to those dimensions.

Elecvora expert review

Our verdict

A practical and affordable solution for anyone working with QFN24 packages who needs a DIP interface. The dual-pitch support adds versatility, though it requires careful soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports both 0.5mm and 0.65mm pitch QFN24
  • Compact and lightweight design
  • Double-sided for flexible mounting
  • Low cost for prototyping

Cons

  • Requires soldering skills for fine-pitch QFN
  • No header pins or socket included
  • Limited to QFN24 packages only

Best for

Prototyping and repair with QFN24 chips

Not ideal for

Beginners without soldering experience

Specifications

Adapter TypeDIP, QFN
Pitch (mm)0.5
Length (mm)31
Width (mm)13.5
Weight (g)3
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x QFN24 to DIP Adapter

Frequently Asked Questions

What is the pin pitch of this adapter?
The A side has a pitch of 0.5mm, and the B side has a pitch of 0.65mm, both converting to a 2.54mm DIP-24 pitch.
Can I use this adapter with a breadboard?
Yes, the DIP-24 side has standard 2.54mm pitch, making it compatible with breadboards and DIP sockets, but you will need to solder header pins first.
Does the adapter come with header pins?
No, the package includes only the adapter board. Header pins or sockets must be purchased separately.
What are the dimensions of the adapter?
The board measures 31mm in length and 13.5mm in width, with a weight of 3 grams.
Is this adapter compatible with all QFN24 packages?
It supports QFN24 packages with 0.5mm or 0.65mm pitch. Check your chip's datasheet to confirm the pitch and pin count.
How do I clean the adapter after soldering?
Use isopropyl alcohol and a soft brush to remove flux residue. Avoid scratching the PCB surface.

Overview

The QFN24 to DIP Adapter is a double-sided printed circuit board designed to bridge the gap between fine-pitch QFN packages and standard DIP-24 footprints. If you need to prototype with a QFN24 chip, replace a surface-mount component on a through-hole board, or test a QFN24 device in a socket, this adapter provides a practical solution without requiring custom PCB work.

Key Features

  • Dual pitch support: The A side accommodates QFN24 packages with 0.5mm pitch, while the B side supports 0.65mm pitch, covering common QFN24 variants.
  • Standard DIP output: All 24 pins are routed to a 2.54mm pitch DIP-24 layout, compatible with breadboards, perfboards, and DIP sockets.
  • Double-sided design: Each side offers 24 pins, allowing flexible mounting and soldering options.
  • Compact and lightweight: At 31mm x 13.5mm and only 3 grams, it adds minimal bulk to your project.

Specifications Explained

The 0.5mm pitch refers to the center-to-center distance between adjacent pins on the QFN package, a common spacing for compact ICs. The adapter routes these fine-pitch connections to a 2.54mm pitch, the standard spacing for through-hole components, making it easy to use with standard prototyping tools. The board length of 31mm and width of 13.5mm provide enough space for comfortable soldering while keeping the footprint small. The 3-gram weight ensures it won't strain connections in delicate setups.

Compatibility and Requirements

This adapter is specifically designed for QFN24 packages with either 0.5mm or 0.65mm pitch. It requires soldering to attach the QFN chip and to connect the DIP pins to your target board or socket. No additional components are included. The adapter does not include a socket or header pins; these must be supplied separately if needed.

Typical Uses

  • Prototyping QFN24-based circuits on a breadboard
  • Repairing or replacing QFN24 chips on through-hole PCBs
  • Testing QFN24 sensors or ICs in a DIP socket
  • Educational projects involving surface-mount soldering

What's in the Box

Package includes: 1 x QFN24 to DIP Adapter.

Quick specs

Adapter Type
DIP, QFN
Pitch (mm)
0.5
Length (mm)
31
Width (mm)
13.5
Weight (g)
3
Shipping Weight
0.001 kg
See all specifications