Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A double-sided 0.5mm pitch adapter PCB that converts QFN32 and QFN40 chips into DIP32 and DIP40 footprints. It lets you prototype QFN parts on a breadboard or socket using a standard male pin header.

Key Highlights

  • Double-sided board: QFN32 on one side, QFN40 on the other
  • 0.5mm pitch footprints for fine-pitch QFN chips
  • Ground plane included for cleaner prototype builds
  • Slim 41 x 15.5mm outline fits breadboards and sockets
  • Converts to DIP32 and DIP40 through-hole spacing
  • Weighs about 5g, light enough for flying leads

Ideal For

  • Makers prototyping with fine-pitch QFN chips
  • Electronics students learning surface-mount soldering
  • Repair technicians testing QFN devices on the bench
  • Hardware developers evaluating QFN32 or QFN40 parts
  • Breadboard hobbyists who prefer through-hole wiring

Buying Tip

Check that your chip is QFN32 or QFN40 at 0.5mm pitch and order a male pin header separately, since the adapter ships as a bare PCB.

Elecvora expert review

Our verdict

A practical, low-cost bridge between fine-pitch QFN chips and through-hole prototyping. It is a bare board, so expect to supply your own header and soldering skill.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Covers both QFN32 and QFN40 on one board
  • 0.5mm pitch suits common fine-pitch QFN parts
  • Ground plane helps keep prototype wiring tidy
  • Compact 41 x 15.5mm size fits breadboards

Cons

  • Bare PCB only, no header or socket included
  • 0.5mm pitch soldering needs care and a fine tip
  • No pinout diagram or documentation mentioned

Best for

Bench prototyping and evaluation of QFN32/QFN40 chips

Not ideal for

Plug-and-play use without soldering

Specifications

Adapter TypeDIP, QFN
Pitch (mm)0.5
Length (mm)41
Width (mm)15.5
Weight (g)5
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x QFN32 QFN40 SMD to DIP Adapter PCB Board

Frequently Asked Questions

Which chips fit this adapter?
It supports QFN32 and QFN40 packages at 0.5mm pitch, with one footprint on each side of the board.
Does it come with pin headers?
No. The package contains the adapter PCB only, so you need to supply a male pin header and any socket yourself.
Can I use it on a breadboard?
Yes. Once header pins are soldered to the DIP rows, the adapter can plug into a breadboard or DIP socket.
Do I need to solder the chip?
Yes. The QFN device must be soldered to the 0.5mm pitch pads, and the header pins must be soldered to the DIP rows.
What are the board dimensions?
The adapter measures 41mm by 15.5mm and weighs about 5g.
How should I store it?
Keep it in an anti-static bag or a dry parts drawer to protect the exposed pads from dust and moisture.

Overview

This adapter PCB solves a common prototyping problem: you have a QFN32 or QFN40 chip in a fine 0.5mm pitch package, but your breadboard, socket or through-hole board only accepts DIP parts. The board is double-sided, with the QFN32 footprint on one face and the QFN40 footprint on the other, so a single adapter covers both package sizes. Once the chip is soldered down, the adapter presents the signals on DIP32 or DIP40 spacing, letting you use a male pin header to plug into a socket or breadboard.

Key Features

  • Two footprints, one board: QFN32 on one side and QFN40 on the other, both at 0.5mm pitch.
  • DIP output: Converts to DIP32 and DIP40 layouts for through-hole prototyping.
  • Ground plane: Included on the board to support stable prototype wiring.
  • Compact outline: 41mm long and 15.5mm wide, about 5g in weight.
  • Header-friendly: Designed for use with a male pin header for easy connection.

Specifications Explained

Pitch: 0.5mm

Pitch is the centre-to-centre distance between adjacent pads. At 0.5mm, this adapter targets fine-pitch QFN packages, so you will need a fine soldering tip and steady hand or a reflow method to align the chip accurately.

Dimensions: 41 x 15.5mm

The long, narrow shape keeps the adapter within typical breadboard and socket footprints while leaving room for the DIP pin rows on both edges.

Weight: 5g

Light enough that it will not strain jumper wires or flying leads during bench testing.

Compatibility and Requirements

The adapter is intended for QFN32 and QFN40 chips at 0.5mm pitch. It outputs to DIP32 and DIP40 spacing, so you will also need a male pin header and, if you want to swap chips, a matching DIP socket. Soldering is required to attach the QFN device and the header pins; the board does not include either.

Typical Uses

  • Breadboard testing of a QFN32 or QFN40 chip before a final PCB is designed.
  • Evaluating an unfamiliar QFN part and experimenting with its connections.
  • Repair and rework benches where a QFN device needs to be tested in a through-hole circuit.
  • Teaching and student projects that use surface-mount chips on DIP-style boards.

What's in the Box

One QFN32 QFN40 SMD to DIP adapter PCB board. Chips, pin headers and sockets are not included.

Quick specs

Adapter Type
DIP, QFN
Pitch (mm)
0.5
Length (mm)
41
Width (mm)
15.5
Weight (g)
5
Shipping Weight
0.001 kg
See all specifications