Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact red light digital LED photoelectric display module that runs on 2.7V to 3.3V and draws about 10mA. Its high brightness keeps red readouts clear and easy to see in indicators, panels and prototype builds.

Key Highlights

  • Red light digital LED photoelectric display module
  • Low 2.7V to 3.3V operating voltage range
  • Current rating of 10mA for efficient use
  • High brightness for clear, readable red output
  • Compact and lightweight for tight installations
  • Suitable for prototypes, panels and indicator builds

Ideal For

  • Makers building breadboard and prototype circuits
  • Electronics repair technicians replacing display parts
  • Product developers sourcing small red readouts
  • Hobbyists adding indicator displays to enclosures
  • Students learning low-voltage display wiring

Buying Tip

Confirm your supply sits within 2.7V to 3.3V and add a suitable series resistor so the display stays near its 10mA rating.

Elecvora expert review

Our verdict

A small, low-power red LED display that suits prototyping and indicator work where a bright, simple readout is needed. It is a generic part, so buyers should verify wiring and pinout on arrival.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Low 2.7V to 3.3V operating range
  • Modest 10mA current draw
  • High brightness red output
  • Compact and lightweight

Cons

  • Pinout and connector type not specified
  • No driver or resistors included
  • Limited technical detail beyond voltage and current

Best for

Makers and technicians needing a compact red display for prototypes and panels

Not ideal for

Projects requiring documented pinouts or a complete display driver kit

Specifications

Item TypeLED Photoelectric
Current Rating (A)10mA
Voltage Rating2.7V to 3.3V
Screen Size (inch)50.2 x 19 x 8 inches
Shipping Weight0.006 kg
Shipping Dimensions7 × 3 × 2 cm

What's in the box

  • 1 x Red light Digital LED Photoelectric High Brightness Display

Frequently Asked Questions

What voltage does this display need?
It is rated for 2.7V to 3.3V. Keep your supply inside that range and use a series resistor if needed.
How much current does it draw?
The current rating is 10mA. Size your resistor or driver so the display stays near this figure.
Is a resistor or driver included?
No. The package includes only the display, so plan to supply resistors, wiring and any driver separately.
What is included in the box?
One red light digital LED photoelectric high brightness display. No cables or mounting hardware are listed.
Can I use it outdoors?
The display is described as high brightness, but no weatherproof rating is given. Use it in a protected enclosure outdoors.
How should I care for it?
Keep it dry, avoid mechanical stress and stay within the stated voltage and current limits.

Overview

This red light digital LED photoelectric display is a compact optoelectronic component designed to present bright red characters or indicators in electronic equipment. It is a generic part aimed at builders who need a simple, visible display element without a complex setup. The module operates from a 2.7V to 3.3V supply and has a current rating of 10mA, which places it in the low-power range for small electronics work.

Because it is small and light, the display fits easily into control panels, instrument faces, hobby enclosures and prototype boards. The red light output is intended to be high brightness, helping the readout stand out against darker backgrounds and in typical indoor lighting.

Key Features

  • Red light output: a clear red display element for indicators and numeric readouts.
  • Low voltage operation: runs from 2.7V to 3.3V, matching common small-electronics rails.
  • 10mA current rating: modest draw that suits battery-powered and low-power designs.
  • High brightness: designed for good visibility in panels and enclosures.
  • Compact build: lightweight and easy to fit into tight spaces.

Specifications Explained

The 2.7V to 3.3V voltage rating means the display is intended for low-voltage logic and small power supplies. Check that your project rail falls inside this window before connecting it, and use a suitable series resistor if your supply sits at the upper end.

The 10mA current rating tells you how much current the display is expected to draw. This is low enough for most microcontroller boards and small battery packs, but you should still confirm your driver or resistor choice keeps current within this figure.

The listed screen dimensions of 50.2 x 19 x 8 give an idea of the module footprint, while the shipping weight of 0.006 kg and shipping dimensions of 7 x 3 x 2 cm show how small and light the part is in transit. Plan your mounting and panel cutout around these figures.

Compatibility and Requirements

The display needs a DC supply within the stated 2.7V to 3.3V range. No connector type, pinout or driver IC is specified in the product data, so check the physical part you receive before wiring it into a circuit. Because only the voltage and current ratings are given, confirm signal-level and wiring details against your own design rather than assuming compatibility with a particular controller.

Typical Uses

  • Indicator lights and status readouts on control panels
  • Prototype and breadboard projects needing a red display
  • Instrument and meter faces in small enclosures
  • Hobby electronics, repair work and parts stock
  • Small-batch product builds where a red readout is required

What's in the Box

The package includes one red light digital LED photoelectric high brightness display. No cables, resistors, drivers or mounting hardware are listed, so plan to supply those separately if your build needs them.

Quick specs

Item Type
LED Photoelectric
Current Rating (A)
10mA
Voltage Rating
2.7V to 3.3V
Screen Size (inch)
50.2 x 19 x 8 inches
Shipping Weight
0.006 kg
Shipping Dimensions
7 × 3 × 2 cm
See all specifications