
1 / 4 · Click to enlarge
At a glance
Made by Seeed Studio, this sound sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.5 to 10; s/n ratio (db) > 58; length (mm) 24. Check that your power source supplies 3.5 to 10 before connecting it.
Key Highlights
- Operating Voltage (VDC): 3.5 to 10
- S/N Ratio (dB): > 58
- Length (mm): 24
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 3.5 to 10 |
|---|---|
| Frequency Range (Hz) | 50 to 2000 |
| S/N Ratio (dB) | > 58 |
| Length (mm) | 24 |
| Width (mm) | 20 |
| Mounting Hole Diameter (mm) | 2 |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6.9 × 4.4 × 1 cm |
Overview
The Seeed Studio Grove Loudness Sensor, made by Seeed Studio, is listed in our sound sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 3.5 to 10 (match this to your power supply; too high a voltage can damage the part)
- Frequency Range (Hz): 50 to 2000 (quoted range is usually line-of-sight; walls and interference shorten it)
- S/N Ratio (dB): > 58
- Length (mm): 24 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
- Mounting Hole Diameter (mm): 2
- Weight (g): 4 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
How loud is too loud? Want to detect? But, detecting sound isn't as simple as a mic into an input, that's why we are presenting the Seeed Studio’s Grove – Loudness Sensor for it! With this sensor, you will be able to detect the environmental sound and measure its loudness in terms of intensity.
This sensor is based on amplifier LM2904 and a built-in microphone. Signal conditioning and gain control are important and are incorporated into this Grove Loudness sensor. Using an electret mic and two-stage high-pass filter using an LM2904 OP-AMP, it creates a nice, detectable envelope signal for your Grove project.
This sensor receives the high-frequency signal from the microphone, then amplifies it to a certain extent and then, filters it. And finally, it provides a positive envelope at the output. This will make for Arduino’s signal acquisition. The output value depends on the level of sound input. In order to avoid unnecessary signal disturbances, the input signal will go through two times’ filtering inside the module. This sensor comes with a built-in screw potentiometer that enables manual adjustments to the output gain.
For all Grove users (especially beginners), Seeed Studio provides guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before using the product. This is a suitable product for not only Grove users but also all electronic enthusiasts. So, why wait? Buy now!
Features:
- Gain adjustable via screw potentiometer
- Wide supply voltage range
- Built-in signal filtering
- Grove compatible interface
- Easy to use
Useful Links:
Package Includes:
1 x Seeed Studio Grove Loudness Sensor
Quick specs
- Operating Voltage (VDC)
- 3.5 to 10
- Frequency Range (Hz)
- 50 to 2000
- S/N Ratio (dB)
- > 58
- Length (mm)
- 24
- Width (mm)
- 20
- Mounting Hole Diameter (mm)
- 2




















