
1 / 5 · Click to enlarge
At a glance
Made by Seeed Studio, this seeed studio modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.3 to 5; accelerometer type ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g; gyroscope ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 3.3 to 5
- Accelerometer Type: ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g
- Gyroscope: ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 3.3 to 5 |
|---|---|
| Accelerometer Type | ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g |
| Gyroscope | ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s |
| Operating Temperature (°C) | -40? ~ +85? |
| Interface | I2C |
| Batteries Required | Excluded |
| Length (mm) | 40 |
| Width (mm) | 20 |
| Mounting Hole Diameter (mm) | 2 |
| Weight (g) | 10 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
Overview
The SeeedStudio BMI088 Grove 6 Axis Accelerometer & Gyroscope, made by Seeed Studio, is listed in our seeed studio modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Accelerometer Type: ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g (space for firmware, files or media)
- Gyroscope: ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s
- Operating Temperature (°C): -40? ~ +85?
- Interface: I2C (confirm your cable or board uses the same connector)
- Batteries Required: Excluded
- Length (mm): 40 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Grove - 6-Axis Accelerometer&Gyroscope(BMI088) is a 6 DoF(degrees of freedom) High-performance Inertial Measurement Unit(IMU).This sensor is based on BOSCH BMI088, which is a high-performance IMU with high vibration suppression. The 6-axis sensor combines a 16-bit triaxial gyroscope and a 16-bit triaxial accelerometer. Specially, you can use this sensor on the drone and robotics applications in demanding environments.
Pin Diagram
Features:
- The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
- Wide acceleration measurement range(up to 24g)
- The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g
Useful Links:
Package Includes:
1 x Grove - 6-Axis Accelerometer and Gyroscope (BMI088)
1 x Grove cable
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5
- Accelerometer Type
- ?3g @10920 LSB/g, ?6g @5460 LSB/g, ?12g @2730 LSB/g, ?24g @1365 LSB/g
- Gyroscope
- ?125?/s @262.1 LSB/?/s, ?250?/s @131.1 LSB/?/s, ?500?/s @65.5 LSB/?/s, ?1000?/s @32.8 LSB/?/s, ?2000?/s @16.4 LSB/?/s
- Operating Temperature (°C)
- -40? ~ +85?
- Interface
- I2C
- Batteries Required
- Excluded




















