Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Grove-compatible air quality module built on the Winsen MP503 sensor that responds to carbon monoxide, alcohol, acetone, thinner and formaldehyde. It runs on 3.3V or 5V and connects to Arduino or Raspberry Pi with a single Grove cable.

Key Highlights

  • Winsen MP503 sensor responds to a broad range of target gases
  • Works with both 3.3V and 5V power supplies
  • Grove connector for quick plug-and-play wiring
  • Compact 40 x 20 x 15 mm board weighing 11 g
  • Low power consumption suits continuous monitoring
  • Long-term stability for extended indoor use

Ideal For

  • Makers building indoor air quality monitors
  • Students learning about gas sensors and microcontrollers
  • Product developers prototyping air quality features
  • Arduino and Raspberry Pi hobbyists adding environmental sensing
  • Automation builders creating sprayer or air cycling triggers

Buying Tip

Remember this sensor gives qualitative readings across several gases at once, so plan your project around trend detection rather than exact gas concentration values.

Elecvora expert review

Our verdict

A tidy, low-cost Grove module that makes broad-spectrum air quality sensing easy to add to Arduino and Raspberry Pi projects. It suits qualitative monitoring well, provided you respect its limits around prolonged heavy pollution.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple Grove connection with cable included
  • Accepts both 3.3V and 5V supplies
  • Responds to a wide range of target gases
  • Small, light board that fits tight enclosures
  • Low power draw for continuous operation

Cons

  • Gives qualitative rather than precise gas readings
  • Cannot distinguish between individual gases
  • Sensitivity can weaken after long exposure to heavy pollution

Best for

Indoor air quality monitoring and automation prototypes

Not ideal for

Applications needing calibrated, gas-specific concentration measurement

Specifications

Item TypeAir Quality Sensor
SensorWinsen MP503
Dimensions (L x W x H) mm40mm x20mm x15mm
Weight (g)11g
Shipping Weight0.005 kg
Shipping Dimensions5 × 4 × 1 cm

What's in the box

  • 1 x Grove Air Quality Sensor v1.3
  • 1 x Grove cable

Frequently Asked Questions

Which gases does this sensor respond to?
It responds to carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. Because the MP503 reacts broadly, it indicates general air condition rather than identifying a single gas.
Can I use it with a Raspberry Pi?
Yes. The module supports 3.3V and 5V and is designed for Arduino and Raspberry Pi boards. You will need a Grove port or a Grove-to-pin adapter on your Pi.
What voltage does it need?
The board accepts both 3.3V and 5V supplies, so it matches either logic level without an extra regulator.
What comes in the package?
You receive one Grove Air Quality Sensor v1.3 and one Grove cable. No host board or adapter is included.
Does it give an exact gas concentration?
No. The sensor performs better at qualitative results across a wide scope of target gases, so treat readings as trends rather than calibrated values.
How should I care for the sensor?
Keep it out of sustained heavily polluted air, which can significantly weaken its sensitivity over time. Use it in normal indoor conditions for the best longevity.

Overview

The Seeed Studio Grove Air Quality Sensor v1.3 is a small, ready-to-use module for indoor air quality sensing. At its core sits the Winsen MP503 gas sensor, which responds to a wide scope of target gases including carbon monoxide, alcohol, acetone, thinner and formaldehyde. Rather than measuring one gas in isolation, the module gives a qualitative indication across a broad range of slightly toxic gases, which is useful when you want a general sense of air condition rather than a lab-grade concentration figure.

The board measures 40 x 20 x 15 mm and weighs just 11 g, so it drops easily into small enclosures, prototype cases and handheld builds. It accepts both 3.3V and 5V supplies, letting you use it with a wide spread of Arduino and Raspberry Pi projects without extra level shifting.

Key Features

  • Winsen MP503 sensing element for broad-spectrum gas response
  • Dual voltage support at 3.3V or 5V
  • Grove interface for fast, solder-free connections
  • Low power consumption for always-on monitoring
  • Long-term stability across extended operating periods
  • Compact and light at 40 x 20 x 15 mm and 11 g

Specifications Explained

The sensor type matters most here. The MP503 is a general-purpose gas sensing element, so expect it to react to several gases at once rather than identify which one is present. That behaviour is ideal for qualitative air quality checks, where the goal is to spot a change in air condition and act on it.

The 3.3V and 5V compatibility means you can wire the module to either logic level without a separate regulator. The Grove connector carries power and signal in one cable, cutting setup time and reducing wiring errors. With a weight of 11 g and shipping weight of 0.005 kg, the module adds almost nothing to a build and is inexpensive to ship.

Compatibility and Requirements

The module is designed to work with Arduino and Raspberry Pi boards and supports both 3.3V and 5V power. A Grove cable is included in the box, so no separate connector purchase is needed. You will need a host board with a Grove port or an appropriate Grove-to-pin adapter to connect the module.

Typical Uses

  • Indoor air quality monitors and warning indicators
  • Auto refresher sprayer triggers
  • Automatic air cycling systems
  • Educational and prototyping projects on gas sensing

What's in the Box

  • 1 x Grove Air Quality Sensor v1.3
  • 1 x Grove cable

A Note on Care

If the sensor is exposed to heavily polluted air for a long period, its sensitivity can weaken noticeably. Keep it away from sustained high concentrations to preserve response over time.

Quick specs

Item Type
Air Quality Sensor
Sensor
Winsen MP503
Dimensions (L x W x H) mm
40mm x20mm x15mm
Weight (g)
11g
Shipping Weight
0.005 kg
Shipping Dimensions
5 × 4 × 1 cm
See all specifications