
1 / 2 · Click to enlarge
At a glance
Made by Seeed Studio, this light sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 5; length (mm) 25; width (mm) 20. Check that your power source supplies 5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 5
- Length (mm): 25
- Width (mm): 20
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 5 |
|---|---|
| Length (mm) | 25 |
| Width (mm) | 20 |
| Mounting Hole Diameter (mm) | 2 |
| Weight (g) | 1 (approx) |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6.6 × 4.2 × 1 cm |
Overview
The SeeedStudio Grove Line Finder v1.1 (Line Tracking Sensor), made by Seeed Studio, is listed in our light sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 5 (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 25 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
- Mounting Hole Diameter (mm): 2
- Weight (g): 1 (approx) (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6.6 × 4.2 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Are you working on a line following robot project? So you must be looking for a line finder? Since most of the automated robotic projects start from a line-following robot, it is very important to have a line finder device for such robots. That's why we are presenting Grove – Line Finder v1.1 for you. It consists of two parts - an IR emitting LED and an IR sensitive phototransistor. When the phototransistor detects the reflected infrared light from the IR emitting LED, it will output a digital signal. This digital signal changes from HIGH to LOW. This Line Finder can output a digital signal to a microcontroller, so the robot can reliably follow a black line on a white background or vice versa. The line finder works on TTL digital output mode. The output becomes HIGH when black is detected and LOW when white is detected.
The Grove – Line Finder v1.1 is a small-sized device, so it doesn’t require too much space on the project dashboard. You can also adjust its detecting range. It uses the LMV358 comparator and the RS-06WD photo-reflective diode to carry out the line following tasks. The Line Finder comes with a 4 pin Buckled Grove interface.
For all Grove users (especially beginners), Seeed Studio provides guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before using the product. This is a suitable product for not only Grove users but also all electronics enthusiasts. So, buy now!
Features:
- High to low digital output
- Adjustable detecting range
- IR emitting LED and sensitive phototransistor
- Grove compatible interface
- Small size
Useful Links:
Project Links:
Make a Mini Toy Car With Arduino
Package Includes:
1 x SeeedStudio Grove Line Finder v1.1 (Line Tracking Sensor)
Quick specs
- Operating Voltage (VDC)
- 5
- Length (mm)
- 25
- Width (mm)
- 20
- Mounting Hole Diameter (mm)
- 2
- Weight (g)
- 1 (approx)
- Shipping Weight
- 0.01 kg




















