Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Grove-compatible UV sensor based on the GUVA-S12SD photodiode, covering 200–400 nm. It outputs an analog signal proportional to UV intensity for easy integration into environmental or lab projects.

Key Highlights

  • GUVA-S12SD Schottky photodiode for UV detection
  • Wide 200–400 nm spectral response range
  • Grove connector for plug-and-play wiring
  • Low power consumption for portable setups
  • High stability and good sensitivity
  • Compact 20 × 20 mm board with 2 mm mounting holes

Ideal For

  • Makers building environmental monitoring projects
  • Students learning about UV radiation and sensors
  • Researchers needing a compact UV sensing module
  • Educators demonstrating light spectrum concepts
  • Developers integrating UV data into IoT devices

Buying Tip

Check that your development board has an analog input and a Grove connector or adapter, as the sensor outputs an analog voltage.

Elecvora expert review

Our verdict

The Seeed Studio Grove UV Sensor offers a straightforward way to add UV detection to Grove-based projects. Its wide spectral range and stable output make it a practical choice for environmental and educational applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy integration with Grove ecosystem
  • Wide 200–400 nm detection range
  • Compact and lightweight design
  • Low power consumption

Cons

  • Requires a microcontroller with analog input
  • Calibration may be needed for absolute UV measurements
  • Limited to Grove-compatible boards unless using an adapter

Best for

Makers and educators needing a simple UV sensing module for Grove projects

Not ideal for

Applications requiring precise UV index readings without calibration

Specifications

Model No. / NameUV Sensor
Length (mm)20
Width (mm)20
Mounting Hole Diameter (mm)2
Weight (g)5
Shipping Weight0.01 kg
Shipping Dimensions14 × 9 × 2 cm

What's in the box

  • 1 x Grove UV Sensor
  • 1 x Grove Cable

Frequently Asked Questions

What is the spectral range of this sensor?
The sensor responds to ultraviolet radiation between 200 nm and 400 nm.
Does it come with a cable?
Yes, a Grove cable is included in the package.
What output does the sensor provide?
It provides an analog voltage that varies with the intensity of incident UV light.
Can I connect it to an Arduino board?
Yes, if your Arduino board has a Grove shield or you use a Grove-to-pin adapter, since the sensor uses a Grove connector.
How do I mount the sensor?
The board has two 2 mm mounting holes for securing it with screws or standoffs.
Is the sensor waterproof?
No, the sensor is not specified as waterproof and should be protected from moisture.

Overview

The Seeed Studio Grove UV Sensor is a ready-to-use module for measuring the intensity of ultraviolet radiation. At its core is the GUVA-S12SD Schottky-type photodiode, which responds to wavelengths between 200 nm and 400 nm. The module converts incident UV light into an electrical signal that varies with intensity, allowing you to monitor UV levels in real time. With a 20 × 20 mm board, 2 mm mounting holes, and a Grove interface, it is easy to mount and connect in prototypes or permanent installations.

Key Features

  • GUVA-S12SD sensor: Schottky photodiode optimised for UV detection.
  • Wide spectral range: Responds to 200–400 nm ultraviolet radiation.
  • Grove interface: Simple plug-and-play connection to Grove-compatible boards.
  • Low power consumption: Suitable for battery-powered or remote sensing.
  • High stability and sensitivity: Reliable readings across varied conditions.
  • Compact footprint: 20 × 20 mm with 2 mm mounting holes for easy installation.

Specifications Explained

The 200–400 nm spectral range covers the UVA and UVB bands, making the sensor useful for applications where these components are of interest. The analog output changes with UV intensity, so you can read it with any microcontroller that has an analog input. The board’s small size (20 × 20 mm) and light weight (5 g) mean it adds minimal bulk to your project. Mounting holes of 2 mm diameter allow secure fastening to enclosures or brackets. Shipping weight is 0.01 kg, and the package dimensions are 14 × 9 × 2 cm.

Compatibility and Requirements

The Grove UV Sensor uses a standard Grove connector, so it pairs with development boards that have Grove ports or with Grove-to-pin adapters. You will need a microcontroller capable of reading analog voltage and a Grove cable (included) to connect the sensor. No additional libraries are strictly required, though example code is available from the manufacturer’s tutorial resources.

Typical Uses

  • Environmental UV index monitoring
  • Laboratory experiments involving UV exposure
  • Educational projects on light and radiation
  • Portable UV detection setups
  • Integration into weather stations or data loggers

What's in the Box

  • 1 × Grove UV Sensor module
  • 1 × Grove cable

Quick specs

Model No. / Name
UV Sensor
Length (mm)
20
Width (mm)
20
Mounting Hole Diameter (mm)
2
Weight (g)
5
Shipping Weight
0.01 kg
See all specifications