
1 / 5 · Click to enlarge
AI Summary
A 5V Grove-compatible module that drives a 105kHz ultrasonic transducer to turn water into mist. It lets you add atomization to a humidifier or scent project with minimal wiring.
Key Highlights
- 5V DC operation at roughly 2W power draw
- 105kHz ultrasonic transducer included for mist generation
- ETA1617 and NE555 driver chips onboard
- Grove connector and cable for quick board hookup
- Slim 140 x 85 x 11.6mm module footprint
- Suits humidifiers, scent emitters and prototyping
Ideal For
- Makers building a small humidifier prototype
- Students learning about ultrasonic atomization
- Smart-home developers adding a mist stage
- Product prototypers testing scent emitters
- Educators demonstrating 5V driver circuits
Buying Tip
Confirm you have a stable 5V supply that can deliver the module's 2W draw before wiring the transducer into your reservoir.
Elecvora expert review
Our verdict
A tidy, purpose-built atomization board that removes the trickiest part of a mist project, the driver electronics. It is a sensible pick when you want a 5V Grove-compatible module and are ready to handle the water-side mechanics yourself.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Driver chips already integrated on the board
- Grove cable and transducer included
- Clear 5V and 2W power figures for supply planning
- Compact board that fits small housings
Cons
- No reservoir or housing included
- Transducer side runs at a 65V peak, so care is needed
- Water contact and sealing are left to the builder
Best for
Makers and students building a first ultrasonic humidifier or scent emitter
Not ideal for
Anyone wanting a finished, enclosed humidifier appliance
Specifications
| Operating Voltage (VDC) | 5 |
|---|---|
| Power Rating | 2 |
| Peak Voltage(V) | 65±5V |
| Operating Frequency (KHz) | 105±5kHz |
| Chip | ETA1617、NE555 |
| Dimensions (L x W x H) mm | 140mm x85mm x11.6mm |
| Weight (g) | G.W 13g |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
What's in the box
- 1 x Grove Water Atomization v1.0 module
- 1 x Ultrasonic transducer
- 1 x Grove cable
Frequently Asked Questions
What voltage does the module need?
Is the ultrasonic transducer included?
What frequency does the transducer run at?
Can I connect it to any board?
Is the high peak voltage dangerous?
Does it come with a water tank?
Overview
The Seeed Studio Grove Water Atomization v1.0 is a ready-built atomization stage for projects that need to turn liquid water into a fine mist. Instead of working out a boost converter and oscillator yourself, you get a board built around the ETA1617 and NE555 chips, paired with an ultrasonic transducer that vibrates at 105kHz to release droplets from the water surface.
Because the board accepts a 5V DC supply and uses a Grove interface, it slots neatly into the kind of rapid prototyping workflow that Grove ecosystems are known for. You can move from a breadboard idea to a working mist generator in a short session, then concentrate your effort on the enclosure, reservoir and control logic that make your project unique.
Key Features
- Ultrasonic atomization: the included transducer operates at 105kHz to produce mist from water.
- Simple power needs: a single 5V DC rail is enough, with a power rating of about 2W.
- Integrated drive electronics: the ETA1617 and NE555 handle the boost and timing functions on the board.
- Grove connectivity: the Grove connector and supplied cable keep wiring tidy and quick.
- Compact board: measuring 140 x 85 x 11.6mm, it fits into small housings and flat layouts.
Specifications Explained
Operating voltage of 5V DC means the module matches the most common logic and USB-style supply rails, so it is straightforward to power from a bench supply or a 5V regulator in your build.
Power rating of 2W gives you a realistic figure for sizing your supply and estimating how long a given source will last. Plan for that draw rather than treating the module as a negligible load.
Peak voltage of 65 plus or minus 5V is the high-voltage drive the board generates for the transducer. Treat the transducer side with care and keep it away from anything that could be damaged by that drive level.
Operating frequency of 105 plus or minus 5kHz describes the ultrasonic band the transducer works in. Matching the supplied transducer to the board is what makes the mist production reliable.
Physical size and weight are modest: the board is 140 x 85 x 11.6mm and the packed weight is around 13g, so it adds very little bulk to a portable or wall-mounted design.
Compatibility and Requirements
The module uses a Grove interface, and a Grove cable is included, so it connects to Grove-compatible boards and shields without custom connectors. You will need to provide a 5V DC supply capable of supporting the module's 2W draw, plus a water reservoir and a housing suited to your project. The supplied ultrasonic transducer is the part that contacts the water and produces the mist.
Typical Uses
- Small humidifiers for desks, plant areas or display cases
- Scent emitters for rooms and interactive installations
- Smart-home projects that need a mist or humidity stage
- Teaching demonstrations of ultrasonic atomization
- Prototyping an atomizer module before a larger build
What's in the Box
- 1 x Grove Water Atomization v1.0 module
- 1 x Ultrasonic transducer
- 1 x Grove cable
Quick specs
- Operating Voltage (VDC)
- 5
- Power Rating
- 2
- Peak Voltage(V)
- 65±5V
- Operating Frequency (KHz)
- 105±5kHz
- Chip
- ETA1617、NE555
- Dimensions (L x W x H) mm
- 140mm x85mm x11.6mm



















